netconfcentral logo

ietf-access-control-list@2019-03-04



  module ietf-access-control-list {

    yang-version 1.1;

    namespace
      "urn:ietf:params:xml:ns:yang:ietf-access-control-list";

    prefix acl;

    import ietf-yang-types {
      prefix yang;
      reference
        "RFC 6991 - Common YANG Data Types.";


    }
    import ietf-packet-fields {
      prefix pf;
      reference
        "RFC 8519 - YANG Data Model for Network Access Control
        	   Lists (ACLs).";


    }
    import ietf-interfaces {
      prefix if;
      reference
        "RFC 8343 - A YANG Data Model for Interface Management.";


    }

    organization
      "IETF NETMOD (Network Modeling) Working Group.";

    contact
      "WG Web:  <https://datatracker.ietf.org/wg/netmod/>
     WG List: netmod@ietf.org

     Editor: Mahesh Jethanandani
             mjethanandani@gmail.com
     Editor: Lisa Huang
             huangyi_99@yahoo.com
     Editor: Sonal Agarwal
             sagarwal12@gmail.com
     Editor: Dana Blair
             dana@blairhome.com";

    description
      "This YANG module defines a component that describes the
     configuration and monitoring of Access Control Lists (ACLs).

     The key words 'MUST', 'MUST NOT', 'REQUIRED', 'SHALL',
     'SHALL NOT', 'SHOULD', 'SHOULD NOT', 'RECOMMENDED',
     'NOT RECOMMENDED', 'MAY', and 'OPTIONAL' in this document
     are to be interpreted as described in BCP 14 (RFC 2119)
     (RFC 8174) when, and only when, they appear in all
     capitals, as shown here.

     Copyright (c) 2019 IETF Trust and the persons identified as
     the document authors.  All rights reserved.

     Redistribution and use in source and binary forms, with or
     without modification, is permitted pursuant to, and subject
     to the license terms contained in, the Simplified BSD
     License set forth in Section 4.c of the IETF Trust's Legal
     Provisions Relating to IETF Documents
     (http://trustee.ietf.org/license-info).

     This version of this YANG module is part of RFC 8519; see
     the RFC itself for full legal notices.";

    revision "2019-03-04" {
      description "Initial version.";
      reference
        "RFC 8519: YANG Data Model for Network Access Control
        	  Lists (ACLs).";

    }


    identity forwarding-action {
      base 
      description
        "Base identity for actions in the forwarding category.";
    }

    identity accept {
      base forwarding-action;
      description "Accept the packet.";
    }

    identity drop {
      base forwarding-action;
      description
        "Drop packet without sending any ICMP error message.";
    }

    identity reject {
      base forwarding-action;
      description
        "Drop the packet and send an ICMP error message to the source.";
    }

    identity log-action {
      base 
      description
        "Base identity for defining the destination for logging
       actions.";
    }

    identity log-syslog {
      base log-action;
      description
        "System log (syslog) the information for the packet.";
    }

    identity log-none {
      base log-action;
      description
        "No logging for the packet.";
    }

    identity acl-base {
      base 
      description
        "Base Access Control List type for all Access Control List type
       identifiers.";
    }

    identity ipv4-acl-type {
      base acl:acl-base;
      description
        "An ACL that matches on fields from the IPv4 header
       (e.g., IPv4 destination address) and Layer 4 headers (e.g., TCP
       destination port).  An ACL of type ipv4 does not contain
       matches on fields in the Ethernet header or the IPv6 header.";
    }

    identity ipv6-acl-type {
      base acl:acl-base;
      description
        "An ACL that matches on fields from the IPv6 header
       (e.g., IPv6 destination address) and Layer 4 headers (e.g., TCP
       destination port).  An ACL of type ipv6 does not contain
       matches on fields in the Ethernet header or the IPv4 header.";
    }

    identity eth-acl-type {
      base acl:acl-base;
      description
        "An ACL that matches on fields in the Ethernet header,
       like 10/100/1000baseT or a Wi-Fi Access Control List.  An ACL
       of type ethernet does not contain matches on fields in the
       IPv4 header, the IPv6 header, or Layer 4 headers.";
    }

    identity mixed-eth-ipv4-acl-type {
      base acl:eth-acl-type;acl:ipv4-acl-type;
      description
        "An ACL that contains a mix of entries that match
       on fields in Ethernet headers and in IPv4 headers.
       Matching on Layer 4 header fields may also exist in the
       list.";
    }

    identity mixed-eth-ipv6-acl-type {
      base acl:eth-acl-type;acl:ipv6-acl-type;
      description
        "An ACL that contains a mix of entries that match on fields
       in Ethernet headers and in IPv6 headers.  Matching
       on Layer 4 header fields may also exist in the list.";
    }

    identity mixed-eth-ipv4-ipv6-acl-type {
      base acl:eth-acl-type;acl:ipv4-acl-type;acl:ipv6-acl-type;
      description
        "An ACL that contains a mix of entries that
       match on fields in Ethernet headers, IPv4 headers, and IPv6
       headers.  Matching on Layer 4 header fields may also exist
       in the list.";
    }

    feature match-on-eth {
      description
        "The device can support matching on Ethernet headers.";
    }

    feature match-on-ipv4 {
      description
        "The device can support matching on IPv4 headers.";
    }

    feature match-on-ipv6 {
      description
        "The device can support matching on IPv6 headers.";
    }

    feature match-on-tcp {
      description
        "The device can support matching on TCP headers.";
    }

    feature match-on-udp {
      description
        "The device can support matching on UDP headers.";
    }

    feature match-on-icmp {
      description
        "The device can support matching on ICMP (v4 and v6) headers.";
    }

    feature eth {
      if-feature match-on-eth;
      description
        "Plain Ethernet ACL supported.";
    }

    feature ipv4 {
      if-feature match-on-ipv4;
      description
        "Plain IPv4 ACL supported.";
    }

    feature ipv6 {
      if-feature match-on-ipv6;
      description
        "Plain IPv6 ACL supported.";
    }

    feature mixed-eth-ipv4 {
      if-feature match-on-eth and match-on-ipv4;
      description
        "Ethernet and IPv4 ACL combinations supported.";
    }

    feature mixed-eth-ipv6 {
      if-feature match-on-eth and match-on-ipv6;
      description
        "Ethernet and IPv6 ACL combinations supported.";
    }

    feature mixed-eth-ipv4-ipv6 {
      if-feature match-on-eth and match-on-ipv4
and match-on-ipv6;
      description
        "Ethernet, IPv4, and IPv6 ACL combinations supported.";
    }

    feature interface-stats {
      description
        "ACL counters are available and reported only per interface.";
    }

    feature acl-aggregate-stats {
      description
        "ACL counters are aggregated over all interfaces and reported
       only per ACL entry.";
    }

    feature interface-attachment {
      description
        "ACLs are set on interfaces.";
    }

    typedef acl-type {
      type identityref {
        base acl-base;
      }
      description
        "This type is used to refer to an ACL type.";
    }

    grouping acl-counters {
      description
        "Common grouping for ACL counters.";
      leaf matched-packets {
        type yang:counter64;
        config false;
        description
          "Count of the number of packets matching the current ACL
         entry.

         An implementation should provide this counter on a
         per-interface, per-ACL-entry basis if possible.

         If an implementation only supports ACL counters on a per-
         entry basis (i.e., not broken out per interface), then the
         value should be equal to the aggregate count across all
         interfaces.

         An implementation that provides counters on a per-entry, per-
         interface basis is not required to also provide an aggregate
         count, e.g., per entry -- the user is expected to be able to
         implement the required aggregation if such a count is
         needed.";
      }

      leaf matched-octets {
        type yang:counter64;
        config false;
        description
          "Count of the number of octets (bytes) matching the current
         ACL entry.

         An implementation should provide this counter on a
         per-interface, per-ACL-entry basis if possible.

         If an implementation only supports ACL counters per entry
         (i.e., not broken out per interface), then the value
         should be equal to the aggregate count across all interfaces.

         An implementation that provides counters per entry per
         interface is not required to also provide an aggregate count,
         e.g., per entry -- the user is expected to be able to
         implement the required aggregation if such a count is needed.";
      }
    }  // grouping acl-counters

    container acls {
      description
        "This is a top-level container for Access Control Lists.
       It can have one or more acl nodes.";
      list acl {
        key "name";
        description
          "An ACL is an ordered list of ACEs.  Each ACE has a
         list of match criteria and a list of actions.
         Since there are several kinds of ACLs implemented
         with different attributes for different vendors,
         this model accommodates customizing ACLs for
         each kind and for each vendor.";
        leaf name {
          type string {
            length "1..64";
          }
          description
            "The name of the access list.  A device MAY further
           restrict the length of this name; space and special
           characters are not allowed.";
        }

        leaf type {
          type acl-type;
          description
            "Type of ACL.  Indicates the primary intended
           type of match criteria (e.g., Ethernet, IPv4, IPv6, mixed,
           etc.) used in the list instance.";
        }

        container aces {
          description
            "The aces container contains one or more ACE nodes.";
          list ace {
            key "name";
            ordered-by user;
            description "List of ACEs.";
            leaf name {
              type string {
                length "1..64";
              }
              description
                "A unique name identifying this ACE.";
            }

            container matches {
              description
                "The rules in this set determine what fields will be
               matched upon before any action is taken on them.
               The rules are selected based on the feature set
               defined by the server and the acl-type defined.
               If no matches are defined in a particular container,
               then any packet will match that container.  If no
               matches are specified at all in an ACE, then any
               packet will match the ACE.";
              choice l2 {
                description
                  "Match Layer 2 headers, for example, Ethernet
                 header fields.";
                container eth {
                  when
                    "derived-from-or-self(/acls/acl/type, "
                      + "'acl:eth-acl-type')";
                  if-feature match-on-eth;
                  description
                    "Rule set that matches Ethernet headers.";
                  uses pf:acl-eth-header-fields;
                }  // container eth
              }  // choice l2

              choice l3 {
                description
                  "Choice of either IPv4 or IPv6 headers";
                container ipv4 {
                  when
                    "derived-from-or-self(/acls/acl/type, "
                      + "'acl:ipv4-acl-type')";
                  if-feature match-on-ipv4;
                  description
                    "Rule set that matches IPv4 headers.";
                  uses pf:acl-ip-header-fields;

                  uses pf:acl-ipv4-header-fields;
                }  // container ipv4
                container ipv6 {
                  when
                    "derived-from-or-self(/acls/acl/type, "
                      + "'acl:ipv6-acl-type')";
                  if-feature match-on-ipv6;
                  description
                    "Rule set that matches IPv6 headers.";
                  uses pf:acl-ip-header-fields;

                  uses pf:acl-ipv6-header-fields;
                }  // container ipv6
              }  // choice l3

              choice l4 {
                description
                  "Choice of TCP, UDP, or ICMP headers.";
                container tcp {
                  if-feature match-on-tcp;
                  description
                    "Rule set that matches TCP headers.";
                  uses pf:acl-tcp-header-fields;

                  container source-port {
                    description
                      "Source port definition.";
                    choice source-port {
                      description
                        "Choice of source port definition using
                       range/operator or a choice to support future
                       'case' statements, such as one enabling a
                       group of source ports to be referenced.";
                      case range-or-operator {
                        description
                          "Source port definition from range or
                         operator.";
                        uses pf:port-range-or-operator;
                      }  // case range-or-operator
                    }  // choice source-port
                  }  // container source-port

                  container destination-port {
                    description
                      "Destination port definition.";
                    choice destination-port {
                      description
                        "Choice of destination port definition using
                       range/operator or a choice to support future
                       'case' statements, such as one enabling a
                       group of destination ports to be referenced.";
                      case range-or-operator {
                        description
                          "Destination port definition from range or
                         operator.";
                        uses pf:port-range-or-operator;
                      }  // case range-or-operator
                    }  // choice destination-port
                  }  // container destination-port
                }  // container tcp
                container udp {
                  if-feature match-on-udp;
                  description
                    "Rule set that matches UDP headers.";
                  uses pf:acl-udp-header-fields;

                  container source-port {
                    description
                      "Source port definition.";
                    choice source-port {
                      description
                        "Choice of source port definition using
                       range/operator or a choice to support future
                       'case' statements, such as one enabling a
                       group of source ports to be referenced.";
                      case range-or-operator {
                        description
                          "Source port definition from range or
                         operator.";
                        uses pf:port-range-or-operator;
                      }  // case range-or-operator
                    }  // choice source-port
                  }  // container source-port

                  container destination-port {
                    description
                      "Destination port definition.";
                    choice destination-port {
                      description
                        "Choice of destination port definition using
                       range/operator or a choice to support future
                       'case' statements, such as one enabling a
                       group of destination ports to be referenced.";
                      case range-or-operator {
                        description
                          "Destination port definition from range or
                         operator.";
                        uses pf:port-range-or-operator;
                      }  // case range-or-operator
                    }  // choice destination-port
                  }  // container destination-port
                }  // container udp
                container icmp {
                  if-feature match-on-icmp;
                  description
                    "Rule set that matches ICMP headers.";
                  uses pf:acl-icmp-header-fields;
                }  // container icmp
              }  // choice l4

              leaf egress-interface {
                type if:interface-ref;
                description
                  "Egress interface.  This should not be used if this ACL
                 is attached as an egress ACL (or the value should
                 equal the interface to which the ACL is attached).";
              }

              leaf ingress-interface {
                type if:interface-ref;
                description
                  "Ingress interface.  This should not be used if this ACL
                 is attached as an ingress ACL (or the value should
                 equal the interface to which the ACL is attached).";
              }
            }  // container matches

            container actions {
              description
                "Definition of actions for this ace entry.";
              leaf forwarding {
                type identityref {
                  base forwarding-action;
                }
                mandatory true;
                description
                  "Specifies the forwarding action per ace entry.";
              }

              leaf logging {
                type identityref {
                  base log-action;
                }
                default "log-none";
                description
                  "Specifies the log action and destination for
                 matched packets.  Default value is not to log the
                 packet.";
              }
            }  // container actions

            container statistics {
              if-feature acl-aggregate-stats;
              config false;
              description
                "Statistics gathered across all attachment points for the
               given ACL.";
              uses acl-counters;
            }  // container statistics
          }  // list ace
        }  // container aces
      }  // list acl

      container attachment-points {
        description
          "Enclosing container for the list of
         attachment points on which ACLs are set.";
        grouping interface-acl {
          description
            "Grouping for per-interface ingress ACL data.";
          container acl-sets {
            description
              "Enclosing container for the list of ingress ACLs on the
             interface.";
            list acl-set {
              key "name";
              ordered-by user;
              description
                "List of ingress ACLs on the interface.";
              leaf name {
                type leafref {
                  path "/acls/acl/name";
                }
                description
                  "Reference to the ACL name applied on the ingress.";
              }

              list ace-statistics {
                if-feature interface-stats;
                key "name";
                config false;
                description "List of ACEs.";
                leaf name {
                  type leafref {
                    path
                      "/acls/acl/aces/ace/name";
                  }
                  description
                    "Name of the ace entry.";
                }

                uses acl-counters;
              }  // list ace-statistics
            }  // list acl-set
          }  // container acl-sets
        }  // grouping interface-acl
        list interface {
          if-feature interface-attachment;
          key "interface-id";
          description
            "List of interfaces on which ACLs are set.";
          leaf interface-id {
            type if:interface-ref;
            description
              "Reference to the interface id list key.";
          }

          container ingress {
            description
              "The ACLs applied to the ingress interface.";
            uses interface-acl;
          }  // container ingress

          container egress {
            description
              "The ACLs applied to the egress interface.";
            uses interface-acl;
          }  // container egress
        }  // list interface
      }  // container attachment-points
    }  // container acls
  }  // module ietf-access-control-list