openconfig-wifi-phy

Model for managing PHY layer configuration of Radio interfaces.

  • Version: 2017-12-21

    openconfig-wifi-phy@2017-12-21


    
      module openconfig-wifi-phy {
    
        yang-version 1;
    
        namespace
          "http://openconfig.net/yang/wifi/phy";
    
        prefix oc-wifi-phy;
    
        import openconfig-yang-types {
          prefix oc-yang;
        }
        import openconfig-extensions {
          prefix oc-ext;
        }
        import openconfig-types {
          prefix oc-types;
        }
        import openconfig-wifi-types {
          prefix oc-wifi-types;
        }
    
        organization "OpenConfig working group";
    
        contact
          "OpenConfig working group
        www.openconfig.net";
    
        description
          "Model for managing PHY layer configuration of Radio interfaces.";
    
        revision "2017-12-21" {
          description
            "Add last-seen to neighbor-table.";
          reference
            "0.2.0";
    
        }
    
        revision "2017-11-06" {
          description
            "Add SSID to neighbor-table.";
          reference
            "0.1.1";
    
        }
    
        revision "2017-07-25" {
          description "Initial revision.";
          reference
            "0.1.0";
    
        }
    
        oc-ext:openconfig-version "0.2.0";
    
        grouping radio-common-config {
          description
            "Configuration items common to all Radio interfaces, independent
          of frequency";
          leaf id {
            type uint8;
            description
              "Unique ID of the radio.";
          }
    
          leaf operating-frequency {
            type identityref {
              base oc-wifi-types:OPERATING_FREQUENCY;
            }
            description
              "Operating frequency of this radio.";
          }
    
          leaf enabled {
            type boolean;
            default "true";
            description
              "The desired operational state (up/down) of this radio interface.";
          }
    
          leaf transmit-power {
            type int8;
            units "dBm";
            default '9';
            description
              "Transmit power of the radio, in dBm.";
          }
    
          leaf channel {
            type uint8 {
              range "1..165";
            }
            description
              "Operating channel of this radio. If using channel-bonding this
            will represent the Primary 20MHz channel of the 40,80,160MHz channel.";
          }
    
          leaf channel-width {
            type uint8;
            units "MHz";
            default '20';
            description
              "Operating channel-width of this radio.";
          }
    
          leaf dca {
            type boolean;
            default "true";
            description
              "Utilize Dynamic Channel Assignment on this Radio.";
          }
    
          leaf-list allowed-channels {
            type oc-wifi-types:channels-type;
            description
              "Allowed channel list for this Radio to utilize.";
          }
    
          leaf dtp {
            type boolean;
            default "true";
            description
              "Utilize dynamic transmit-power on this Radio.";
          }
    
          leaf dtp-min {
            when "../dtp = 'true'";
            type int8;
            default '3';
            description
              "Minimum allowed transmit-power on this radio, if utilizing dtp.
            Expressed in dBm.";
          }
    
          leaf dtp-max {
            when "../dtp = 'true'";
            type int8;
            default '15';
            description
              "Maximum allowed transmit-power on this radio, if utilizing dtp.
            Expressed in dBm.";
          }
    
          leaf antenna-gain {
            type int8;
            description
              "Antenna gain applied to this Radio; typically used when
            external antennae connected.";
          }
    
          leaf scanning {
            type boolean;
            default "true";
            description
              "Whether the radio will perform off-channel scanning, to collect
            neighboring RF information.";
          }
    
          leaf scanning-interval {
            type uint8;
            units "seconds";
            description
              "How often, in seconds, the radio will go off-channel to perform
            scanning.";
          }
    
          leaf scanning-dwell-time {
            type uint16;
            units "milliseconds";
            description
              "Amount of time, in milliseconds, the radio will spend on a
            channel during scanning-interval. If a Monitor-mode Radio, it will
            cycle through scanning-allowed-channels spending this amount of time
            on each.";
          }
    
          leaf scanning-defer-clients {
            type uint8;
            description
              "Do not perform scanning if this amount of Stations are Associated
            to the Radio.";
          }
    
          leaf scanning-defer-traffic {
            type boolean;
            description
              "Do not perform scanning if any traffic received from an active Station
            in the past 100ms marked as AC_VO or AC_VI.";
          }
        }  // grouping radio-common-config
    
        grouping radio-common-state {
          description
            "Grouping for defining radio-specific operational state";
          leaf base-radio-mac {
            type oc-yang:mac-address;
            description
              "Represents the 'burned-in' base-radio MAC
            address for the a Radio interface.";
          }
    
          leaf dfs-hit-time {
            type oc-types:timeticks64;
            description
              "Reports the time of the last DFS hit. The value is the timestamp
            in nanoseconds relative to the Unix Epoch (Jan 1, 1970 00:00:00 UTC).";
          }
    
          leaf channel-change-reason {
            type identityref {
              base oc-wifi-types:CHANGE_REASON_TYPE;
            }
            description
              "When an Access Point changes channels, this will
            provide the reason that led to the change.";
          }
    
          leaf total-channel-utilization {
            type oc-types:percentage;
            description
              "Total 802.11 and non-802.11 channel utilization on this Radio. The
            total channel utilization should include all time periods the AP
            spent actively receiving and transmitting 802.11 frames, and also
            include all time spent with clear channel assessment (CCA) in a
            busy state";
          }
    
          leaf rx-dot11-channel-utilization {
            type oc-types:percentage;
            description
              "Received channel-utilization due to 802.11 frames";
          }
    
          leaf rx-noise-channel-utilization {
            type oc-types:percentage;
            description
              "Received channel-utilization percentage due to Noise.";
          }
    
          leaf tx-dot11-channel-utilization {
            type oc-types:percentage;
            description
              "Transmit channel-utilization percentage.";
          }
        }  // grouping radio-common-state
    
        grouping radio-counters-state {
          description
            "Radio telemetry statistics.";
          container counters {
            description
              "A collection of radio-related statistics objects.";
            leaf failed-fcs-frames {
              type oc-yang:counter64;
              description
                "Number of frames that failed the FCS";
            }
    
            leaf noise-floor {
              type int8;
              description
                "Noise Floor, as measured by this radio.";
            }
          }  // container counters
        }  // grouping radio-counters-state
    
        grouping neighbor-list-state {
          description
            "Operational state data relating to neighboring
           BSSIDs and their received signal strength.";
          leaf bssid {
            type oc-yang:mac-address;
            description "Neighboring BSSID.";
          }
    
          leaf ssid {
            type string;
            description
              "The SSID of this neighboring BSSID.";
          }
    
          leaf rssi {
            type int8;
            description
              "The RSSI of this neighboring BSSID.";
          }
    
          leaf channel {
            type uint16;
            description
              "The channel of this neighboring BSSID. This is to utilize 802.11ac
            nomenclature. For example, 40MHz channel 36-40 represented as
            channel 38. primary-channel used to identify the primary
            20MHz channel of the neighbor.";
          }
    
          leaf primary-channel {
            type uint16;
            description
              "The primary 20MHz channel, if the neighbor is operating on bonded
            channel.";
          }
    
          leaf last-seen {
            type oc-types:timeticks64;
            description
              "Reports the time this reading was taken, indicating when this neighbor
            was last seen. If a cache is used, it MUST be updated instantly when a
            neighbor BSS changes channels, or a new BSS is seen. The value is the
            timestamp in nanoseconds relative to the Unix Epoch
            (Jan 1, 1970 00:00:00 UTC).";
          }
        }  // grouping neighbor-list-state
    
        grouping neighbor-bssid-top {
          description
            "Top-level grouping for neighbor table
        operational state data.";
          container neighbors {
            description
              "Top-level container for RF neighbors.";
            list neighbor {
              key "bssid";
              config false;
              description
                "The mac address, or BSSID, of a neighbor, and
              their corresponding RSSI.";
              leaf bssid {
                type leafref {
                  path "../state/bssid";
                }
                config false;
                description
                  "Reference to neighbor bssid.";
              }
    
              container state {
                config false;
                description
                  "State container for RF neighbors.";
                uses neighbor-list-state;
              }  // container state
            }  // list neighbor
          }  // container neighbors
        }  // grouping neighbor-bssid-top
    
        grouping radio-top {
          description
            "Top-level grouping for radio configuration and
          operational state data";
          container radios {
            description
              "Top level container for radios, including configuration
            and state data.";
            list radio {
              key "id";
              description
                "The list of radios on the device.";
              leaf id {
                type leafref {
                  path "../config/id";
                }
                description
                  "References the configured id of the radio";
              }
    
              container config {
                description
                  "Configurable items at the global, radio interface
                level";
                uses radio-common-config;
              }  // container config
    
              container state {
                config false;
                description
                  "Operational state data at the global radio level";
                uses radio-common-config;
    
                uses radio-common-state;
    
                uses radio-counters-state;
              }  // container state
    
              uses neighbor-bssid-top;
            }  // list radio
          }  // container radios
        }  // grouping radio-top
    
        uses radio-top;
      }  // module openconfig-wifi-phy
    

© 2023 YumaWorks, Inc. All rights reserved.