openconfig-wavelength-router

Organization:

OpenConfig working group

Module:

openconfig-wavelength-router

Version:

2021-07-26

File:

openconfig-wavelength-router.yang

Abstract:

This model describes configuration and operational state data for an optical transport line system node, or ROADM (incl. CDC ROA...

Contact:

OpenConfig working group
www.openconfig.net

Check for an additional details:

YANG Catalog

Description:

This model describes configuration and operational state data
for an optical transport line system node, or ROADM (incl. CDC
ROADMs, WSS, Dynamic Gain Equalizer/DGE).

Nodes are modeled as a configurable switching element with
ingress and egress ports, as well as a number of add/drop ports
that can be set up to direct portions of the optical spectrum
to the appropriate degrees.

In relation to configuring target spectrum powers, there
are two, non-overlapping, configuration possibilities that are
supported.
1. Non-noise loaded wavelength router:
- The target spectrum powers are configured on each media
channel.
2. Noise-loaded wavelength router:
- The target spectrum power values will be configured as a
target spectrum power profile over the full spectrum instead
of individual media channels.