avg-min-max-instant-stats-precision18-ber |
instant avg min max |
Common grouping for recording bit error rate (BER) values
with 18 decimal precision. Note that decimal64 supports
values as small as i x 10^-18 where i is an integer. Values
smaller than this should be reported as 0 to inidicate error
free or near error free performance. Values include the
instantaneous, average, minimum, and maximum statistics |
avg-min-max-instant-stats-precision18-ber |
instant avg min max intervalmin-time max-time |
Common grouping for recording bit error rate (BER) values
with 18 decimal precision. Note that decimal64 supports
values as small as i x 10^-18 where i is an integer. Values
smaller than this should be reported as 0 to inidicate error
free or near error free performance. Values include the
instantaneous, average, minimum, and maximum statistics.
Statistics are computed and reported based on a moving time
interval (e.g., the last 30s). If supported by the device,
the time interval over which the statistics are computed, and
the times at which the minimum and maximum values occurred,
are also reported. |
avg-min-max-instant-stats-precision18-ber |
instant avg min max intervalmin-time max-time |
Common grouping for recording bit error rate (BER) values
with 18 decimal precision. Note that decimal64 supports
values as small as i x 10^-18 where i is an integer. Values
smaller than this should be reported as 0 to inidicate error
free or near error free performance. Values include the
instantaneous, average, minimum, and maximum statistics.
Statistics are computed and reported based on a moving time
interval (e.g., the last 30s). If supported by the device,
the time interval over which the statistics are computed, and
the times at which the minimum and maximum values occurred,
are also reported. |
avg-min-max-instant-stats-precision18-ber |
instant avg min max intervalmin-time max-time |
Common grouping for recording bit error rate (BER) values
with 18 decimal precision. Note that decimal64 supports
values as small as i x 10^-18 where i is an integer. Values
smaller than this should be reported as 0 to inidicate error
free or near error free performance. Values include the
instantaneous, average, minimum, and maximum statistics.
Statistics are computed and reported based on a moving time
interval (e.g., the last 30s). If supported by the device,
the time interval over which the statistics are computed, and
the times at which the minimum and maximum values occurred,
are also reported. |
avg-min-max-instant-stats-precision18-ber |
instant avg min max intervalmin-time max-time |
Common grouping for recording bit error rate (BER) values
with 18 decimal precision. Note that decimal64 supports
values as small as i x 10^-18 where i is an integer. Values
smaller than this should be reported as 0 to inidicate error
free or near error free performance. Values include the
instantaneous, average, minimum, and maximum statistics.
Statistics are computed and reported based on a moving time
interval (e.g., the last 30s). If supported by the device,
the time interval over which the statistics are computed, and
the times at which the minimum and maximum values occurred,
are also reported. |
avg-min-max-instant-stats-precision18-ber |
instant avg min max intervalmin-time max-time |
Common grouping for recording bit error rate (BER) values
with 18 decimal precision. Note that decimal64 supports
values as small as i x 10^-18 where i is an integer. Values
smaller than this should be reported as 0 to inidicate error
free or near error free performance. Values include the
instantaneous, average, minimum, and maximum statistics.
Statistics are computed and reported based on a moving time
interval (e.g., the last 30s). If supported by the device,
the time interval over which the statistics are computed, and
the times at which the minimum and maximum values occurred,
are also reported. |
avg-min-max-instant-stats-precision18-ber |
instant avg min max intervalmin-time max-time |
Common grouping for recording bit error rate (BER) values
with 18 decimal precision. Note that decimal64 supports
values as small as i x 10^-18 where i is an integer. Values
smaller than this should be reported as 0 to inidicate error
free or near error free performance. Values include the
instantaneous, average, minimum, and maximum statistics.
Statistics are computed and reported based on a moving time
interval (e.g., the last 30s). If supported by the device,
the time interval over which the statistics are computed, and
the times at which the minimum and maximum values occurred,
are also reported. |
avg-min-max-instant-stats-precision18-ber |
instant avg min max intervalmin-time max-time |
Common grouping for recording bit error rate (BER) values
with 18 decimal precision. Note that decimal64 supports
values as small as i x 10^-18 where i is an integer. Values
smaller than this should be reported as 0 to inidicate error
free or near error free performance. Values include the
instantaneous, average, minimum, and maximum statistics.
Statistics are computed and reported based on a moving time
interval (e.g., the last 30s). If supported by the device,
the time interval over which the statistics are computed, and
the times at which the minimum and maximum values occurred,
are also reported. |
avg-min-max-instant-stats-precision18-ber |
instant avg min max intervalmin-time max-time |
Common grouping for recording bit error rate (BER) values
with 18 decimal precision. Note that decimal64 supports
values as small as i x 10^-18 where i is an integer. Values
smaller than this should be reported as 0 to inidicate error
free or near error free performance. Values include the
instantaneous, average, minimum, and maximum statistics.
Statistics are computed and reported based on a moving time
interval (e.g., the last 30s). If supported by the device,
the time interval over which the statistics are computed, and
the times at which the minimum and maximum values occurred,
are also reported. |
avg-min-max-instant-stats-precision18-ber |
instant avg min max intervalmin-time max-time |
Common grouping for recording bit error rate (BER) values
with 18 decimal precision. Note that decimal64 supports
values as small as i x 10^-18 where i is an integer. Values
smaller than this should be reported as 0 to inidicate error
free or near error free performance. Values include the
instantaneous, average, minimum, and maximum statistics.
Statistics are computed and reported based on a moving time
interval (e.g., the last 30s). If supported by the device,
the time interval over which the statistics are computed, and
the times at which the minimum and maximum values occurred,
are also reported. |
avg-min-max-instant-stats-precision18-ber |
instant avg min max |
Common grouping for recording bit error rate (BER) values
with 18 decimal precision. Note that decimal64 supports
values as small as i x 10^-18 where i is an integer. Values
smaller than this should be reported as 0 to inidicate error
free or near error free performance. Values include the
instantaneous, average, minimum, and maximum statistics |
avg-min-max-instant-stats-precision18-ber |
instant avg min max intervalmin-time max-time |
Common grouping for recording bit error rate (BER) values
with 18 decimal precision. Note that decimal64 supports
values as small as i x 10^-18 where i is an integer. Values
smaller than this should be reported as 0 to inidicate error
free or near error free performance. Values include the
instantaneous, average, minimum, and maximum statistics.
Statistics are computed and reported based on a moving time
interval (e.g., the last 30s). If supported by the device,
the time interval over which the statistics are computed, and
the times at which the minimum and maximum values occurred,
are also reported. |
avg-min-max-instant-stats-precision18-ber |
instant avg min max intervalmin-time max-time |
Common grouping for recording bit error rate (BER) values
with 18 decimal precision. Note that decimal64 supports
values as small as i x 10^-18 where i is an integer. Values
smaller than this should be reported as 0 to inidicate error
free or near error free performance. Values include the
instantaneous, average, minimum, and maximum statistics.
Statistics are computed and reported based on a moving time
interval (e.g., the last 30s). If supported by the device,
the time interval over which the statistics are computed, and
the times at which the minimum and maximum values occurred,
are also reported. |
avg-min-max-instant-stats-precision18-ber |
instant avg min max intervalmin-time max-time |
Common grouping for recording bit error rate (BER) values
with 18 decimal precision. Note that decimal64 supports
values as small as i x 10^-18 where i is an integer. Values
smaller than this should be reported as 0 to inidicate error
free or near error free performance. Values include the
instantaneous, average, minimum, and maximum statistics.
Statistics are computed and reported based on a moving time
interval (e.g., the last 30s). If supported by the device,
the time interval over which the statistics are computed, and
the times at which the minimum and maximum values occurred,
are also reported. |
avg-min-max-instant-stats-precision1-krads |
instant avg min max intervalmin-time max-time |
Common grouping for recording kiloradian per second (krad/s) values
with 1 decimal precision. Values include the instantaneous,
average, minimum, and maximum statistics. Statistics are computed
and reported based on a moving time interval (e.g., the last 30s).
If supported by the device, the time interval over which the
statistics are computed, and the times at which the minimum and
maximum values occurred, are also reported. |
avg-min-max-instant-stats-precision1-krads |
instant avg min max intervalmin-time max-time |
Common grouping for recording kiloradian per second (krad/s) values
with 1 decimal precision. Values include the instantaneous,
average, minimum, and maximum statistics. Statistics are computed
and reported based on a moving time interval (e.g., the last 30s).
If supported by the device, the time interval over which the
statistics are computed, and the times at which the minimum and
maximum values occurred, are also reported. |
avg-min-max-instant-stats-precision1-krads |
instant avg min max intervalmin-time max-time |
Common grouping for recording kiloradian per second (krad/s) values
with 1 decimal precision. Values include the instantaneous,
average, minimum, and maximum statistics. Statistics are computed
and reported based on a moving time interval (e.g., the last 30s).
If supported by the device, the time interval over which the
statistics are computed, and the times at which the minimum and
maximum values occurred, are also reported. |
avg-min-max-instant-stats-precision1-krads |
instant avg min max intervalmin-time max-time |
Common grouping for recording kiloradian per second (krad/s) values
with 1 decimal precision. Values include the instantaneous,
average, minimum, and maximum statistics. Statistics are computed
and reported based on a moving time interval (e.g., the last 30s).
If supported by the device, the time interval over which the
statistics are computed, and the times at which the minimum and
maximum values occurred, are also reported. |
avg-min-max-instant-stats-precision1-krads |
instant avg min max intervalmin-time max-time |
Common grouping for recording kiloradian per second (krad/s) values
with 1 decimal precision. Values include the instantaneous,
average, minimum, and maximum statistics. Statistics are computed
and reported based on a moving time interval (e.g., the last 30s).
If supported by the device, the time interval over which the
statistics are computed, and the times at which the minimum and
maximum values occurred, are also reported. |
avg-min-max-instant-stats-precision1-krads |
instant avg min max intervalmin-time max-time |
Common grouping for recording kiloradian per second (krad/s) values
with 1 decimal precision. Values include the instantaneous,
average, minimum, and maximum statistics. Statistics are computed
and reported based on a moving time interval (e.g., the last 30s).
If supported by the device, the time interval over which the
statistics are computed, and the times at which the minimum and
maximum values occurred, are also reported. |
avg-min-max-instant-stats-precision1-krads |
instant avg min max intervalmin-time max-time |
Common grouping for recording kiloradian per second (krad/s) values
with 1 decimal precision. Values include the instantaneous,
average, minimum, and maximum statistics. Statistics are computed
and reported based on a moving time interval (e.g., the last 30s).
If supported by the device, the time interval over which the
statistics are computed, and the times at which the minimum and
maximum values occurred, are also reported. |
avg-min-max-instant-stats-precision1-krads |
instant avg min max intervalmin-time max-time |
Common grouping for recording kiloradian per second (krad/s) values
with 1 decimal precision. Values include the instantaneous,
average, minimum, and maximum statistics. Statistics are computed
and reported based on a moving time interval (e.g., the last 30s).
If supported by the device, the time interval over which the
statistics are computed, and the times at which the minimum and
maximum values occurred, are also reported. |
avg-min-max-instant-stats-precision1-krads |
instant avg min max intervalmin-time max-time |
Common grouping for recording kiloradian per second (krad/s) values
with 1 decimal precision. Values include the instantaneous,
average, minimum, and maximum statistics. Statistics are computed
and reported based on a moving time interval (e.g., the last 30s).
If supported by the device, the time interval over which the
statistics are computed, and the times at which the minimum and
maximum values occurred, are also reported. |
avg-min-max-instant-stats-precision1-mhz |
instant avg min max intervalmin-time max-time |
Common grouping for recording frequency values in MHz with
1 decimal precision. Values include the instantaneous, average,
minimum, and maximum statistics. Statistics are computed and
reported based on a moving time interval (e.g., the last 30s).
If supported by the device, the time interval over which the
statistics are computed, and the times at which the minimum and
maximum values occurred, are also reported. |
avg-min-max-instant-stats-precision1-mhz |
instant avg min max intervalmin-time max-time |
Common grouping for recording frequency values in MHz with
1 decimal precision. Values include the instantaneous, average,
minimum, and maximum statistics. Statistics are computed and
reported based on a moving time interval (e.g., the last 30s).
If supported by the device, the time interval over which the
statistics are computed, and the times at which the minimum and
maximum values occurred, are also reported. |
avg-min-max-instant-stats-precision1-mhz |
instant avg min max intervalmin-time max-time |
Common grouping for recording frequency values in MHz with
1 decimal precision. Values include the instantaneous, average,
minimum, and maximum statistics. Statistics are computed and
reported based on a moving time interval (e.g., the last 30s).
If supported by the device, the time interval over which the
statistics are computed, and the times at which the minimum and
maximum values occurred, are also reported. |
avg-min-max-instant-stats-precision1-mhz |
instant avg min max intervalmin-time max-time |
Common grouping for recording frequency values in MHz with
1 decimal precision. Values include the instantaneous, average,
minimum, and maximum statistics. Statistics are computed and
reported based on a moving time interval (e.g., the last 30s).
If supported by the device, the time interval over which the
statistics are computed, and the times at which the minimum and
maximum values occurred, are also reported. |
avg-min-max-instant-stats-precision1-mhz |
instant avg min max intervalmin-time max-time |
Common grouping for recording frequency values in MHz with
1 decimal precision. Values include the instantaneous, average,
minimum, and maximum statistics. Statistics are computed and
reported based on a moving time interval (e.g., the last 30s).
If supported by the device, the time interval over which the
statistics are computed, and the times at which the minimum and
maximum values occurred, are also reported. |
avg-min-max-instant-stats-precision1-mhz |
instant avg min max intervalmin-time max-time |
Common grouping for recording frequency values in MHz with
1 decimal precision. Values include the instantaneous, average,
minimum, and maximum statistics. Statistics are computed and
reported based on a moving time interval (e.g., the last 30s).
If supported by the device, the time interval over which the
statistics are computed, and the times at which the minimum and
maximum values occurred, are also reported. |
avg-min-max-instant-stats-precision1-mhz |
instant avg min max intervalmin-time max-time |
Common grouping for recording frequency values in MHz with
1 decimal precision. Values include the instantaneous, average,
minimum, and maximum statistics. Statistics are computed and
reported based on a moving time interval (e.g., the last 30s).
If supported by the device, the time interval over which the
statistics are computed, and the times at which the minimum and
maximum values occurred, are also reported. |
avg-min-max-instant-stats-precision1-mhz |
instant avg min max intervalmin-time max-time |
Common grouping for recording frequency values in MHz with
1 decimal precision. Values include the instantaneous, average,
minimum, and maximum statistics. Statistics are computed and
reported based on a moving time interval (e.g., the last 30s).
If supported by the device, the time interval over which the
statistics are computed, and the times at which the minimum and
maximum values occurred, are also reported. |
avg-min-max-instant-stats-precision1-mhz |
instant avg min max intervalmin-time max-time |
Common grouping for recording frequency values in MHz with
1 decimal precision. Values include the instantaneous, average,
minimum, and maximum statistics. Statistics are computed and
reported based on a moving time interval (e.g., the last 30s).
If supported by the device, the time interval over which the
statistics are computed, and the times at which the minimum and
maximum values occurred, are also reported. |
avg-min-max-instant-stats-precision2-pct |
instant avg min max intervalmin-time max-time |
Common grouping for percentage statistics with 2 decimal precision.
Values include the instantaneous, average, minimum, and maximum
statistics. Statistics are computed and reported based on a moving
time interval (e.g., the last 30s). If supported by the device,
the time interval over which the statistics are computed, and the
times at which the minimum and maximum values occurred, are also
reported. |
avg-min-max-instant-stats-precision2-pct |
instant avg min max intervalmin-time max-time |
Common grouping for percentage statistics with 2 decimal precision.
Values include the instantaneous, average, minimum, and maximum
statistics. Statistics are computed and reported based on a moving
time interval (e.g., the last 30s). If supported by the device,
the time interval over which the statistics are computed, and the
times at which the minimum and maximum values occurred, are also
reported. |
avg-min-max-instant-stats-precision2-pct |
instant avg min max intervalmin-time max-time |
Common grouping for percentage statistics with 2 decimal precision.
Values include the instantaneous, average, minimum, and maximum
statistics. Statistics are computed and reported based on a moving
time interval (e.g., the last 30s). If supported by the device,
the time interval over which the statistics are computed, and the
times at which the minimum and maximum values occurred, are also
reported. |
avg-min-max-instant-stats-precision2-pct |
instant avg min max intervalmin-time max-time |
Common grouping for percentage statistics with 2 decimal precision.
Values include the instantaneous, average, minimum, and maximum
statistics. Statistics are computed and reported based on a moving
time interval (e.g., the last 30s). If supported by the device,
the time interval over which the statistics are computed, and the
times at which the minimum and maximum values occurred, are also
reported. |
avg-min-max-instant-stats-precision2-pct |
instant avg min max intervalmin-time max-time |
Common grouping for percentage statistics with 2 decimal precision.
Values include the instantaneous, average, minimum, and maximum
statistics. Statistics are computed and reported based on a moving
time interval (e.g., the last 30s). If supported by the device,
the time interval over which the statistics are computed, and the
times at which the minimum and maximum values occurred, are also
reported. |
avg-min-max-instant-stats-precision2-pct |
instant avg min max intervalmin-time max-time |
Common grouping for percentage statistics with 2 decimal precision.
Values include the instantaneous, average, minimum, and maximum
statistics. Statistics are computed and reported based on a moving
time interval (e.g., the last 30s). If supported by the device,
the time interval over which the statistics are computed, and the
times at which the minimum and maximum values occurred, are also
reported. |
avg-min-max-instant-stats-precision2-pct |
instant avg min max intervalmin-time max-time |
Common grouping for percentage statistics with 2 decimal precision.
Values include the instantaneous, average, minimum, and maximum
statistics. Statistics are computed and reported based on a moving
time interval (e.g., the last 30s). If supported by the device,
the time interval over which the statistics are computed, and the
times at which the minimum and maximum values occurred, are also
reported. |
avg-min-max-instant-stats-precision2-pct |
instant avg min max intervalmin-time max-time |
Common grouping for percentage statistics with 2 decimal precision.
Values include the instantaneous, average, minimum, and maximum
statistics. Statistics are computed and reported based on a moving
time interval (e.g., the last 30s). If supported by the device,
the time interval over which the statistics are computed, and the
times at which the minimum and maximum values occurred, are also
reported. |
avg-min-max-instant-stats-precision2-pct |
instant avg min max intervalmin-time max-time |
Common grouping for percentage statistics with 2 decimal precision.
Values include the instantaneous, average, minimum, and maximum
statistics. Statistics are computed and reported based on a moving
time interval (e.g., the last 30s). If supported by the device,
the time interval over which the statistics are computed, and the
times at which the minimum and maximum values occurred, are also
reported. |
avg-min-max-instant-stats-precision2-ps |
instant avg min max intervalmin-time max-time |
Common grouping for recording picosecond values with
2 decimal precision. Values include the
instantaneous, average, minimum, and maximum statistics.
Statistics are computed and reported based on a moving time
interval (e.g., the last 30s). If supported by the device,
the time interval over which the statistics are computed, and
the times at which the minimum and maximum values occurred,
are also reported. |
avg-min-max-instant-stats-precision2-ps |
instant avg min max intervalmin-time max-time |
Common grouping for recording picosecond values with
2 decimal precision. Values include the
instantaneous, average, minimum, and maximum statistics.
Statistics are computed and reported based on a moving time
interval (e.g., the last 30s). If supported by the device,
the time interval over which the statistics are computed, and
the times at which the minimum and maximum values occurred,
are also reported. |
avg-min-max-instant-stats-precision2-ps |
instant avg min max intervalmin-time max-time |
Common grouping for recording picosecond values with
2 decimal precision. Values include the
instantaneous, average, minimum, and maximum statistics.
Statistics are computed and reported based on a moving time
interval (e.g., the last 30s). If supported by the device,
the time interval over which the statistics are computed, and
the times at which the minimum and maximum values occurred,
are also reported. |
avg-min-max-instant-stats-precision2-ps |
instant avg min max intervalmin-time max-time |
Common grouping for recording picosecond values with
2 decimal precision. Values include the
instantaneous, average, minimum, and maximum statistics.
Statistics are computed and reported based on a moving time
interval (e.g., the last 30s). If supported by the device,
the time interval over which the statistics are computed, and
the times at which the minimum and maximum values occurred,
are also reported. |
avg-min-max-instant-stats-precision2-ps |
instant avg min max intervalmin-time max-time |
Common grouping for recording picosecond values with
2 decimal precision. Values include the
instantaneous, average, minimum, and maximum statistics.
Statistics are computed and reported based on a moving time
interval (e.g., the last 30s). If supported by the device,
the time interval over which the statistics are computed, and
the times at which the minimum and maximum values occurred,
are also reported. |
avg-min-max-instant-stats-precision2-ps |
instant avg min max intervalmin-time max-time |
Common grouping for recording picosecond values with
2 decimal precision. Values include the
instantaneous, average, minimum, and maximum statistics.
Statistics are computed and reported based on a moving time
interval (e.g., the last 30s). If supported by the device,
the time interval over which the statistics are computed, and
the times at which the minimum and maximum values occurred,
are also reported. |
avg-min-max-instant-stats-precision2-ps |
instant avg min max |
Common grouping for recording picosecond values with
2 decimal precision. Values include the instantaneous,
average, minimum, and maximum statistics |
avg-min-max-instant-stats-precision2-ps |
instant avg min max intervalmin-time max-time |
Common grouping for recording picosecond values with
2 decimal precision. Values include the
instantaneous, average, minimum, and maximum statistics.
Statistics are computed and reported based on a moving time
interval (e.g., the last 30s). If supported by the device,
the time interval over which the statistics are computed, and
the times at which the minimum and maximum values occurred,
are also reported. |
avg-min-max-instant-stats-precision2-ps |
instant avg min max intervalmin-time max-time |
Common grouping for recording picosecond values with
2 decimal precision. Values include the
instantaneous, average, minimum, and maximum statistics.
Statistics are computed and reported based on a moving time
interval (e.g., the last 30s). If supported by the device,
the time interval over which the statistics are computed, and
the times at which the minimum and maximum values occurred,
are also reported. |
avg-min-max-instant-stats-precision2-ps |
instant avg min max intervalmin-time max-time |
Common grouping for recording picosecond values with
2 decimal precision. Values include the
instantaneous, average, minimum, and maximum statistics.
Statistics are computed and reported based on a moving time
interval (e.g., the last 30s). If supported by the device,
the time interval over which the statistics are computed, and
the times at which the minimum and maximum values occurred,
are also reported. |
avg-min-max-instant-stats-precision2-ps |
instant avg min max intervalmin-time max-time |
Common grouping for recording picosecond values with
2 decimal precision. Values include the
instantaneous, average, minimum, and maximum statistics.
Statistics are computed and reported based on a moving time
interval (e.g., the last 30s). If supported by the device,
the time interval over which the statistics are computed, and
the times at which the minimum and maximum values occurred,
are also reported. |
avg-min-max-instant-stats-precision2-ps |
instant avg min max |
Common grouping for recording picosecond values with
2 decimal precision. Values include the instantaneous,
average, minimum, and maximum statistics |
avg-min-max-instant-stats-precision2-ps |
instant avg min max intervalmin-time max-time |
Common grouping for recording picosecond values with
2 decimal precision. Values include the
instantaneous, average, minimum, and maximum statistics.
Statistics are computed and reported based on a moving time
interval (e.g., the last 30s). If supported by the device,
the time interval over which the statistics are computed, and
the times at which the minimum and maximum values occurred,
are also reported. |
avg-min-max-instant-stats-precision2-ps |
instant avg min max intervalmin-time max-time |
Common grouping for recording picosecond values with
2 decimal precision. Values include the
instantaneous, average, minimum, and maximum statistics.
Statistics are computed and reported based on a moving time
interval (e.g., the last 30s). If supported by the device,
the time interval over which the statistics are computed, and
the times at which the minimum and maximum values occurred,
are also reported. |
avg-min-max-instant-stats-precision2-ps2 |
instant avg min max intervalmin-time max-time |
Common grouping for recording picosecond^2 values with
2 decimal precision. Values include the
instantaneous, average, minimum, and maximum statistics.
Statistics are computed and reported based on a moving time
interval (e.g., the last 30s). If supported by the device,
the time interval over which the statistics are computed, and
the times at which the minimum and maximum values occurred,
are also reported. |
avg-min-max-instant-stats-precision2-ps2 |
instant avg min max |
Common grouping for recording picosecond^2 values with
2 decimal precision. Values include the instantaneous,
average, minimum, and maximum statistics |
avg-min-max-instant-stats-precision2-ps2 |
instant avg min max intervalmin-time max-time |
Common grouping for recording picosecond^2 values with
2 decimal precision. Values include the
instantaneous, average, minimum, and maximum statistics.
Statistics are computed and reported based on a moving time
interval (e.g., the last 30s). If supported by the device,
the time interval over which the statistics are computed, and
the times at which the minimum and maximum values occurred,
are also reported. |
avg-min-max-instant-stats-precision2-ps2 |
instant avg min max intervalmin-time max-time |
Common grouping for recording picosecond^2 values with
2 decimal precision. Values include the
instantaneous, average, minimum, and maximum statistics.
Statistics are computed and reported based on a moving time
interval (e.g., the last 30s). If supported by the device,
the time interval over which the statistics are computed, and
the times at which the minimum and maximum values occurred,
are also reported. |
avg-min-max-instant-stats-precision2-ps2 |
instant avg min max intervalmin-time max-time |
Common grouping for recording picosecond^2 values with
2 decimal precision. Values include the
instantaneous, average, minimum, and maximum statistics.
Statistics are computed and reported based on a moving time
interval (e.g., the last 30s). If supported by the device,
the time interval over which the statistics are computed, and
the times at which the minimum and maximum values occurred,
are also reported. |
avg-min-max-instant-stats-precision2-ps2 |
instant avg min max intervalmin-time max-time |
Common grouping for recording picosecond^2 values with
2 decimal precision. Values include the
instantaneous, average, minimum, and maximum statistics.
Statistics are computed and reported based on a moving time
interval (e.g., the last 30s). If supported by the device,
the time interval over which the statistics are computed, and
the times at which the minimum and maximum values occurred,
are also reported. |
avg-min-max-instant-stats-precision2-ps2 |
instant avg min max intervalmin-time max-time |
Common grouping for recording picosecond^2 values with
2 decimal precision. Values include the
instantaneous, average, minimum, and maximum statistics.
Statistics are computed and reported based on a moving time
interval (e.g., the last 30s). If supported by the device,
the time interval over which the statistics are computed, and
the times at which the minimum and maximum values occurred,
are also reported. |
avg-min-max-instant-stats-precision2-ps2 |
instant avg min max intervalmin-time max-time |
Common grouping for recording picosecond^2 values with
2 decimal precision. Values include the
instantaneous, average, minimum, and maximum statistics.
Statistics are computed and reported based on a moving time
interval (e.g., the last 30s). If supported by the device,
the time interval over which the statistics are computed, and
the times at which the minimum and maximum values occurred,
are also reported. |
avg-min-max-instant-stats-precision2-ps2 |
instant avg min max intervalmin-time max-time |
Common grouping for recording picosecond^2 values with
2 decimal precision. Values include the
instantaneous, average, minimum, and maximum statistics.
Statistics are computed and reported based on a moving time
interval (e.g., the last 30s). If supported by the device,
the time interval over which the statistics are computed, and
the times at which the minimum and maximum values occurred,
are also reported. |
avg-min-max-instant-stats-precision2-ps2 |
instant avg min max intervalmin-time max-time |
Common grouping for recording picosecond^2 values with
2 decimal precision. Values include the
instantaneous, average, minimum, and maximum statistics.
Statistics are computed and reported based on a moving time
interval (e.g., the last 30s). If supported by the device,
the time interval over which the statistics are computed, and
the times at which the minimum and maximum values occurred,
are also reported. |
avg-min-max-instant-stats-precision2-ps2 |
instant avg min max intervalmin-time max-time |
Common grouping for recording picosecond^2 values with
2 decimal precision. Values include the
instantaneous, average, minimum, and maximum statistics.
Statistics are computed and reported based on a moving time
interval (e.g., the last 30s). If supported by the device,
the time interval over which the statistics are computed, and
the times at which the minimum and maximum values occurred,
are also reported. |
avg-min-max-instant-stats-precision2-ps2 |
instant avg min max intervalmin-time max-time |
Common grouping for recording picosecond^2 values with
2 decimal precision. Values include the
instantaneous, average, minimum, and maximum statistics.
Statistics are computed and reported based on a moving time
interval (e.g., the last 30s). If supported by the device,
the time interval over which the statistics are computed, and
the times at which the minimum and maximum values occurred,
are also reported. |
avg-min-max-instant-stats-precision2-ps2 |
instant avg min max intervalmin-time max-time |
Common grouping for recording picosecond^2 values with
2 decimal precision. Values include the
instantaneous, average, minimum, and maximum statistics.
Statistics are computed and reported based on a moving time
interval (e.g., the last 30s). If supported by the device,
the time interval over which the statistics are computed, and
the times at which the minimum and maximum values occurred,
are also reported. |
avg-min-max-instant-stats-precision2-ps2 |
instant avg min max |
Common grouping for recording picosecond^2 values with
2 decimal precision. Values include the instantaneous,
average, minimum, and maximum statistics |
avg-min-max-instant-stats-precision2-ps-nm |
instant avg min max intervalmin-time max-time |
Common grouping for recording picosecond per nanometer
values with 2 decimal precision. Values include the
instantaneous, average, minimum, and maximum statistics.
Statistics are computed and reported based on a moving time
interval (e.g., the last 30s). If supported by the device,
the time interval over which the statistics are computed, and
the times at which the minimum and maximum values occurred,
are also reported. |
avg-min-max-instant-stats-precision2-ps-nm |
instant avg min max intervalmin-time max-time |
Common grouping for recording picosecond per nanometer
values with 2 decimal precision. Values include the
instantaneous, average, minimum, and maximum statistics.
Statistics are computed and reported based on a moving time
interval (e.g., the last 30s). If supported by the device,
the time interval over which the statistics are computed, and
the times at which the minimum and maximum values occurred,
are also reported. |
avg-min-max-instant-stats-precision2-ps-nm |
instant avg min max |
Common grouping for recording picosecond per nanometer
values with 2 decimal precision. Values include the
instantaneous, average, minimum, and maximum statistics |
avg-min-max-instant-stats-precision2-ps-nm |
instant avg min max intervalmin-time max-time |
Common grouping for recording picosecond per nanometer
values with 2 decimal precision. Values include the
instantaneous, average, minimum, and maximum statistics.
Statistics are computed and reported based on a moving time
interval (e.g., the last 30s). If supported by the device,
the time interval over which the statistics are computed, and
the times at which the minimum and maximum values occurred,
are also reported. |
avg-min-max-instant-stats-precision2-ps-nm |
instant avg min max intervalmin-time max-time |
Common grouping for recording picosecond per nanometer
values with 2 decimal precision. Values include the
instantaneous, average, minimum, and maximum statistics.
Statistics are computed and reported based on a moving time
interval (e.g., the last 30s). If supported by the device,
the time interval over which the statistics are computed, and
the times at which the minimum and maximum values occurred,
are also reported. |
avg-min-max-instant-stats-precision2-ps-nm |
instant avg min max intervalmin-time max-time |
Common grouping for recording picosecond per nanometer
values with 2 decimal precision. Values include the
instantaneous, average, minimum, and maximum statistics.
Statistics are computed and reported based on a moving time
interval (e.g., the last 30s). If supported by the device,
the time interval over which the statistics are computed, and
the times at which the minimum and maximum values occurred,
are also reported. |
avg-min-max-instant-stats-precision2-ps-nm |
instant avg min max intervalmin-time max-time |
Common grouping for recording picosecond per nanometer
values with 2 decimal precision. Values include the
instantaneous, average, minimum, and maximum statistics.
Statistics are computed and reported based on a moving time
interval (e.g., the last 30s). If supported by the device,
the time interval over which the statistics are computed, and
the times at which the minimum and maximum values occurred,
are also reported. |
avg-min-max-instant-stats-precision2-ps-nm |
instant avg min max intervalmin-time max-time |
Common grouping for recording picosecond per nanometer
values with 2 decimal precision. Values include the
instantaneous, average, minimum, and maximum statistics.
Statistics are computed and reported based on a moving time
interval (e.g., the last 30s). If supported by the device,
the time interval over which the statistics are computed, and
the times at which the minimum and maximum values occurred,
are also reported. |
avg-min-max-instant-stats-precision2-ps-nm |
instant avg min max intervalmin-time max-time |
Common grouping for recording picosecond per nanometer
values with 2 decimal precision. Values include the
instantaneous, average, minimum, and maximum statistics.
Statistics are computed and reported based on a moving time
interval (e.g., the last 30s). If supported by the device,
the time interval over which the statistics are computed, and
the times at which the minimum and maximum values occurred,
are also reported. |
avg-min-max-instant-stats-precision2-ps-nm |
instant avg min max intervalmin-time max-time |
Common grouping for recording picosecond per nanometer
values with 2 decimal precision. Values include the
instantaneous, average, minimum, and maximum statistics.
Statistics are computed and reported based on a moving time
interval (e.g., the last 30s). If supported by the device,
the time interval over which the statistics are computed, and
the times at which the minimum and maximum values occurred,
are also reported. |
avg-min-max-instant-stats-precision2-ps-nm |
instant avg min max |
Common grouping for recording picosecond per nanometer
values with 2 decimal precision. Values include the
instantaneous, average, minimum, and maximum statistics |
avg-min-max-instant-stats-precision2-ps-nm |
instant avg min max intervalmin-time max-time |
Common grouping for recording picosecond per nanometer
values with 2 decimal precision. Values include the
instantaneous, average, minimum, and maximum statistics.
Statistics are computed and reported based on a moving time
interval (e.g., the last 30s). If supported by the device,
the time interval over which the statistics are computed, and
the times at which the minimum and maximum values occurred,
are also reported. |
avg-min-max-instant-stats-precision2-ps-nm |
instant avg min max intervalmin-time max-time |
Common grouping for recording picosecond per nanometer
values with 2 decimal precision. Values include the
instantaneous, average, minimum, and maximum statistics.
Statistics are computed and reported based on a moving time
interval (e.g., the last 30s). If supported by the device,
the time interval over which the statistics are computed, and
the times at which the minimum and maximum values occurred,
are also reported. |
avg-min-max-instant-stats-precision2-ps-nm |
instant avg min max intervalmin-time max-time |
Common grouping for recording picosecond per nanometer
values with 2 decimal precision. Values include the
instantaneous, average, minimum, and maximum statistics.
Statistics are computed and reported based on a moving time
interval (e.g., the last 30s). If supported by the device,
the time interval over which the statistics are computed, and
the times at which the minimum and maximum values occurred,
are also reported. |