This module defines common data elements for OpenConfig data models for optical transport line system elements, such as amplifie...
Version: 2019-06-03
module openconfig-transport-line-common { yang-version 1; namespace "http://openconfig.net/yang/transport-line-common"; prefix oc-line-com; import iana-if-type { prefix ianaift; } import openconfig-extensions { prefix oc-ext; } import openconfig-interfaces { prefix oc-if; } import openconfig-platform { prefix oc-platform; } import openconfig-types { prefix oc-types; } import openconfig-transport-types { prefix oc-opt-types; } import openconfig-platform-transceiver { prefix oc-transceiver; } organization "OpenConfig working group"; contact "OpenConfig working group www.openconfig.net"; description "This module defines common data elements for OpenConfig data models for optical transport line system elements, such as amplifiers and ROADMs (wavelength routers)."; revision "2019-06-03" { description "Add state leaf 'tilt' to optical-port"; reference "0.6.0"; } revision "2019-04-16" { description "Update import prefix for iana-if-type module"; reference "0.5.2"; } revision "2018-11-21" { description "Add OpenConfig module metadata extensions."; reference "0.4.2"; } revision "2018-07-17" { description "Remove leaf 'enabled' from osc-config"; reference "0.4.1"; } revision "2018-05-08" { description "Added leaf 'enabled' to osc-config and leaf 'output-frequency' to osc-state"; reference "0.4.0"; } revision "2017-09-08" { description "Correct bug with OSC interfaces"; reference "0.3.1"; } revision "2017-07-08" { description "Add monitor port type and refs to hw ports, "; reference "0.3.0"; } revision "2017-03-28" { description "Added min/max/avg stats, status for media channels, OCM, APS"; reference "0.2.0"; } revision "2016-03-31" { description "Initial public release"; reference "0.1.0"; } oc-ext:openconfig-version "0.6.0"; oc-ext:regexp-posix; oc-ext:catalog-organization "openconfig"; oc-ext:origin "openconfig"; grouping optical-osc-config { description "Configuration data for OSC interfaces"; leaf interface { type oc-if:base-interface-ref; description "Reference to an OSC interface"; } } // grouping optical-osc-config grouping optical-osc-state { description "Operational state data for OSC interfaces"; container input-power { description "The input optical power of this port in units of 0.01dBm. If avg/min/max statistics are not supported, the target is expected to just supply the instant value"; uses oc-types:avg-min-max-instant-stats-precision2-dBm; } // container input-power container output-power { description "The output optical power of this port in units of 0.01dBm. If avg/min/max statistics are not supported, the target is expected to just supply the instant value"; uses oc-types:avg-min-max-instant-stats-precision2-dBm; } // container output-power container laser-bias-current { description "The current applied by the system to the transmit laser to achieve the output power. The current is expressed in mA with up to one decimal precision. If avg/min/max statistics are not supported, the target is expected to just supply the instant value"; uses oc-types:avg-min-max-instant-stats-precision2-mA; } // container laser-bias-current uses oc-transceiver:output-optical-frequency; } // grouping optical-osc-state grouping optical-osc-top { description "Top-level grouping for configuration and operational state data for optical supervisory channels (OSC) for amplifiers, WSS/ROADM, nodes, etc."; container config { description "Configuration data for OSCs"; uses optical-osc-config; } // container config container state { config false; description "Operational state data for OSCs"; uses optical-osc-config; uses optical-osc-state; } // container state } // grouping optical-osc-top grouping transport-line-common-port-config { description "Configuration data for optical line ports"; leaf admin-state { type oc-opt-types:admin-state-type; description "Sets the admin state of the optical-port"; } } // grouping transport-line-common-port-config grouping transport-line-common-port-state { description "Operational state data describing optical line ports"; leaf optical-port-type { type identityref { base oc-opt-types:OPTICAL_PORT_TYPE; } description "For physical ports belonging to optical transport devices, this indicates the type of optical port. This is an informational field that should be made available by the device."; } leaf tilt { type decimal64 { fraction-digits 2; } units "dB"; description "The total tilt measured on the port. This is applicable to ports of type INGRESS and EGRESS."; } container input-power { description "For line system device ports, this value indicates the total input optical power of the port in units of 0.01dBm. If avg/min/max statistics are not supported, just supply the instant value"; uses oc-types:avg-min-max-instant-stats-precision2-dBm; } // container input-power container output-power { description "For line system device ports, this value indicates the total output optical power of the port in units of 0.01dBm. If avg/min/max statistics are not supported, just supply the instant value"; uses oc-types:avg-min-max-instant-stats-precision2-dBm; } // container output-power } // grouping transport-line-common-port-state grouping transport-line-common-port-top { description "Top-level grouping for optical port data"; container optical-port { description "Contains data specific to ports on optical transport devices."; container config { description "Operational config data for optical ports"; uses transport-line-common-port-config; } // container config container state { config false; description "Operational state data for optical ports"; uses transport-line-common-port-config; uses transport-line-common-port-state; } // container state } // container optical-port } // grouping transport-line-common-port-top augment /oc-platform:components/oc-platform:component/oc-platform:port { description "Adding optical port data to platform components model"; uses transport-line-common-port-top; } augment /oc-if:interfaces/oc-if:interface { when "oc-if:config/oc-if:type = 'ianaift:sonet'" { description "Additional interface configuration parameters when the interface type is SONET/SDH"; } description "Adds additional SONET/SDH-specific data to osc model"; container sonet { description "Data related to SONET/SDH interfaces"; } // container sonet } } // module openconfig-transport-line-common
© 2023 YumaWorks, Inc. All rights reserved.