module openconfig-telemetry {

    yang-version 1;

    namespace
      "http://openconfig.net/yang/telemetry";

    prefix oc-telemetry;

    import openconfig-inet-types {
      prefix oc-inet;
    }
    import openconfig-extensions {
      prefix oc-ext;
    }
    import openconfig-telemetry-types {
      prefix oc-telemetry-types;
    }

    organization "OpenConfig working group";

    contact
      "OpenConfig working group www.openconfig.net";

    description
      "Data model which creates the configuration for the telemetry
     systems and functions on the device.";

    revision "2017-08-24" {
      description "Minor formatting fixes";
      reference
        "0.4.1";

    }

    revision "2017-02-20" {
      description
        "Fixes for YANG 1.0 compliance, add types module";
      reference
        "0.4.0";

    }

    revision "2016-04-05" {
      description
        "OpenConfig public release";
      reference
        "0.2.0";

    }

    oc-ext:openconfig-version "0.4.1";

    grouping telemetry-top {
      description
        "Top level grouping for telemetry configuration and operational
       state data";
      container telemetry-system {
        description
          "Top level configuration and state for the
         device's telemetry system.";
        container sensor-groups {
          description
            "Top level container for sensor-groups.";
          list sensor-group {
            key "sensor-group-id";
            description
              "List of telemetry sensory groups on the local
             system, where a sensor grouping represents a resuable
             grouping of multiple paths and exclude filters.";
            leaf sensor-group-id {
              type leafref {
                path
                  "../config/sensor-group-id";
              }
              description
                "Reference to the name or identifier of the
               sensor grouping";
            }

            container config {
              description
                "Configuration parameters relating to the
               telemetry sensor grouping";
              uses telemetry-sensor-group-config;
            }  // container config

            container state {
              config false;
              description
                "State information relating to the telemetry
               sensor group";
              uses telemetry-sensor-group-config;
            }  // container state

            container sensor-paths {
              description
                "Top level container to hold a set of sensor
               paths grouped together";
              list sensor-path {
                key "path";
                description
                  "List of paths in the model which together
                 comprise a sensor grouping. Filters for each path
                 to exclude items are also provided.";
                leaf path {
                  type leafref {
                    path "../config/path";
                  }
                  description
                    "Reference to the path of interest";
                }

                container config {
                  description
                    "Configuration parameters to configure a set
                   of data model paths as a sensor grouping";
                  uses telemetry-sensor-path-config;
                }  // container config

                container state {
                  config false;
                  description
                    "Configuration parameters to configure a set
                   of data model paths as a sensor grouping";
                  uses telemetry-sensor-path-config;
                }  // container state
              }  // list sensor-path
            }  // container sensor-paths
          }  // list sensor-group
        }  // container sensor-groups

        container destination-groups {
          description
            "Top level container for destination group configuration
           and state.";
          list destination-group {
            key "group-id";
            description
              "List of destination-groups. Destination groups allow the
             reuse of common telemetry destinations across the
             telemetry configuration. An operator references a
             set of destinations via the configurable
             destination-group-identifier.

             A destination group may contain one or more telemetry
             destinations";
            leaf group-id {
              type leafref {
                path "../config/group-id";
              }
              description
                "Unique identifier for the destination group";
            }

            container config {
              description
                "Top level config container for destination groups";
              leaf group-id {
                type string;
                description
                  "Unique identifier for the destination group";
              }
            }  // container config

            container state {
              config false;
              description
                "Top level state container for destination groups";
              leaf group-id {
                type string;
                description
                  "Unique identifier for destination group";
              }
            }  // container state

            container destinations {
              description
                "The destination container lists the destination
               information such as IP address and port of the
               telemetry messages from the network element.";
              list destination {
                key "destination-address destination-port";
                description
                  "List of telemetry stream destinations";
                leaf destination-address {
                  type leafref {
                    path
                      "../config/destination-address";
                  }
                  description
                    "Reference to the destination address of the
                   telemetry stream";
                }

                leaf destination-port {
                  type leafref {
                    path
                      "../config/destination-port";
                  }
                  description
                    "Reference to the port number of the stream
                   destination";
                }

                container config {
                  description
                    "Configuration parameters relating to
                   telemetry destinations";
                  uses telemetry-stream-destination-config;
                }  // container config

                container state {
                  config false;
                  description
                    "State information associated with
                   telemetry destinations";
                  uses telemetry-stream-destination-config;
                }  // container state
              }  // list destination
            }  // container destinations
          }  // list destination-group
        }  // container destination-groups

        container subscriptions {
          description
            "This container holds information for both persistent
           and dynamic telemetry subscriptions.";
          container persistent {
            description
              "This container holds information relating to persistent
             telemetry subscriptions. A persistent telemetry
             subscription is configued locally on the device through
             configuration, and is persistent across device restarts or
             other redundancy changes.";
            list subscription {
              key "subscription-name";
              description
                "List of telemetry subscriptions. A telemetry
               subscription consists of a set of collection
               destinations, stream attributes, and associated paths to
               state information in the model (sensor data)";
              leaf subscription-name {
                type leafref {
                  path
                    "../config/subscription-name";
                }
                description
                  "Reference to the identifier of the subscription
                 itself. The id will be the handle to refer to the
                 subscription once created";
              }

              container config {
                description
                  "Config parameters relating to the telemetry
                 subscriptions on the local device";
                uses telemetry-subscription-name-config;

                uses telemetry-local-source-address-config;

                uses telemetry-qos-marking-config;

                uses telemetry-stream-protocol-config;

                uses telemetry-stream-encoding-config;
              }  // container config

              container state {
                config false;
                description
                  "State parameters relating to the telemetry
                 subscriptions on the local device";
                uses telemetry-subscription-name-config;

                uses telemetry-subscription-config;

                uses telemetry-subscription-state;

                uses telemetry-local-source-address-config;

                uses telemetry-qos-marking-config;

                uses telemetry-stream-protocol-config;

                uses telemetry-stream-encoding-config;
              }  // container state

              container sensor-profiles {
                description
                  "A sensor profile is a set of sensor groups or
                 individual sensor paths which are associated with a
                 telemetry subscription. This is the source of the
                 telemetry data for the subscription to send to the
                 defined collectors.";
                list sensor-profile {
                  key "sensor-group";
                  description
                    "List of telemetry sensor groups used
                   in the subscription";
                  leaf sensor-group {
                    type leafref {
                      path
                        "../config/sensor-group";
                    }
                    description
                      "Reference to the telemetry sensor group name";
                  }

                  container config {
                    description
                      "Configuration parameters related to the sensor
                     profile for a subscription";
                    uses telemetry-sensor-profile-config;
                  }  // container config

                  container state {
                    config false;
                    description
                      "State information relating to the sensor profile
                     for a subscription";
                    uses telemetry-sensor-profile-config;
                  }  // container state
                }  // list sensor-profile
              }  // container sensor-profiles

              container destination-groups {
                description
                  "A subscription may specify destination addresses.
                 If the subscription supplies destination addresses,
                 the network element will be the initiator of the
                 telemetry streaming, sending it to the destination(s)
                 specified.

                 If the destination set is omitted, the subscription
                 preconfigures certain elements such as paths and
                 sample intervals under a specified subscription ID.
                 In this case, the network element will NOT initiate an
                 outbound connection for telemetry, but will wait for
                 an inbound connection from a network management
                 system.

                 It is expected that the network management system
                 connecting to the network element will reference
                 the preconfigured subscription ID when initiating
                 a subscription.";
                list destination-group {
                  key "group-id";
                  description
                    "Identifier of the previously defined destination
                   group";
                  leaf group-id {
                    type leafref {
                      path
                        "../config/group-id";
                    }
                    description
                      "The destination group id references a configured
                     group of destinations for the telemetry stream.";
                  }

                  container config {
                    description
                      "Configuration parameters related to telemetry
                     destinations.";
                    leaf group-id {
                      type leafref {
                        path
                          "../../../../../../../destination-groups/destination-group/group-id";
                      }
                      description
                        "The destination group id references a reusable
                       group of destination addresses and ports for
                       the telemetry stream.";
                    }
                  }  // container config

                  container state {
                    config false;
                    description
                      "State information related to telemetry
                     destinations";
                    leaf group-id {
                      type leafref {
                        path
                          "../../../../../../../destination-groups/destination-group/group-id";
                      }
                      description
                        "The destination group id references a reusable
                       group of destination addresses and ports for
                       the telemetry stream.";
                    }
                  }  // container state
                }  // list destination-group
              }  // container destination-groups
            }  // list subscription
          }  // container persistent

          container dynamic {
            description
              "This container holds information relating to dynamic
             telemetry subscriptions. A dynamic subscription is
             typically configured through an RPC channel, and does not
             persist across device restarts, or if the RPC channel is
             reset or otherwise torn down.";
            list subscription {
              key "subscription-id";
              config false;
              description
                "List representation of telemetry subscriptions that
               are configured via an inline RPC, otherwise known
               as dynamic telemetry subscriptions.";
              leaf subscription-id {
                type leafref {
                  path
                    "../state/subscription-id";
                }
                description
                  "Reference to the identifier of the subscription
                 itself. The id will be the handle to refer to the
                 subscription once created";
              }

              container state {
                config false;
                description
                  "State information relating to dynamic telemetry
                 subscriptions.";
                uses telemetry-subscription-config;

                uses telemetry-stream-destination-config;

                uses telemetry-stream-frequency-config;

                uses telemetry-heartbeat-config;

                uses telemetry-suppress-redundant-config;

                uses telemetry-qos-marking-config;

                uses telemetry-stream-protocol-config;

                uses telemetry-stream-encoding-config;
              }  // container state

              container sensor-paths {
                description
                  "Top level container to hold a set of sensor
                 paths grouped together";
                list sensor-path {
                  key "path";
                  description
                    "List of paths in the model which together
                   comprise a sensor grouping. Filters for each path
                   to exclude items are also provided.";
                  leaf path {
                    type leafref {
                      path "../state/path";
                    }
                    description
                      "Reference to the path of interest";
                  }

                  container state {
                    config false;
                    description
                      "State information for a dynamic subscription's
                     paths of interest";
                    uses telemetry-sensor-path-config;
                  }  // container state
                }  // list sensor-path
              }  // container sensor-paths
            }  // list subscription
          }  // container dynamic
        }  // container subscriptions
      }  // container telemetry-system
    }  // grouping telemetry-top

    grouping telemetry-sensor-path-config {
      description
        "Configuration parameters relating to the
       grouping of data model paths comprising a
       sensor grouping";
      leaf path {
        type string;
        description
          "Path to a section of operational state of interest
         (the sensor).";
      }

      leaf exclude-filter {
        type string;
        description
          "Filter to exclude certain values out of the state
         values";
      }
    }  // grouping telemetry-sensor-path-config

    grouping telemetry-heartbeat-config {
      description
        "Configuration parameters relating to the
       heartbeat of the telemetry subscription";
      leaf heartbeat-interval {
        type uint64;
        description
          "Maximum time interval in seconds that may pass
         between updates from a device to a telemetry collector.
         If this interval expires, but there is no updated data to
         send (such as if suppress_updates has been configured), the
         device must send a telemetry message to the collector.";
      }
    }  // grouping telemetry-heartbeat-config

    grouping telemetry-suppress-redundant-config {
      description
        "Configuration parameters relating to suppression of
       redundant upstream updates";
      leaf suppress-redundant {
        type boolean;
        description
          "Boolean flag to control suppression of redundant
         telemetry updates to the collector platform. If this flag is
         set to TRUE, then the collector will only send an update at
         the configured interval if a subscribed data value has
         changed. Otherwise, the device will not send an update to
         the collector until expiration of the heartbeat interval.";
      }
    }  // grouping telemetry-suppress-redundant-config

    grouping telemetry-sensor-profile-config {
      description
        "Configuration parameters relating to the sensor groups
       used in the sensor profile";
      leaf sensor-group {
        type leafref {
          path
            "../../../../../../../sensor-groups/sensor-group/config/sensor-group-id";
        }
        description
          "Reference to the sensor group which is used in the profile";
      }

      uses telemetry-stream-subscription-config;
    }  // grouping telemetry-sensor-profile-config

    grouping telemetry-stream-subscription-config {
      description
        "Configuration used when the sensor is a stream based sensor.";
      uses telemetry-stream-frequency-config;

      uses telemetry-heartbeat-config;

      uses telemetry-suppress-redundant-config;
    }  // grouping telemetry-stream-subscription-config

    grouping telemetry-qos-marking-config {
      description
        "Config parameters relating to the quality of service
       marking on device generated telemetry packets";
      leaf originated-qos-marking {
        type oc-inet:dscp;
        description
          "DSCP marking of packets generated by the telemetry
         subsystem on the network device.";
      }
    }  // grouping telemetry-qos-marking-config

    grouping telemetry-sensor-group-config {
      description
        "Config parameters related to the sensor groups
       on the device";
      leaf sensor-group-id {
        type string;
        description
          "Name or identifier for the sensor group itself.
         Will be referenced by other configuration specifying a
         sensor group";
      }
    }  // grouping telemetry-sensor-group-config

    grouping telemetry-subscription-config {
      description
        "Configuration parameters relating to the telemetry
       subscription";
      leaf subscription-id {
        type uint64;
        description
          "System generated identifer of the telemetry
         subscription.";
      }
    }  // grouping telemetry-subscription-config

    grouping telemetry-subscription-name-config {
      description
        "Configuration parameters relating to the configured
       name of the telemetry subscription. The name is a user
       configured string value which uniquely identifies the
       subscription in the configuration database.";
      leaf subscription-name {
        type string;
        description
          "User configured identifier of the telemetry
         subscription. This value is used primarily for
         subscriptions configured locally on the network
         element.";
      }
    }  // grouping telemetry-subscription-name-config

    grouping telemetry-subscription-state {
      description
        "State values for the telemetry subscription";
    }  // grouping telemetry-subscription-state

    grouping telemetry-stream-protocol-config {
      description
        "Configuration parameters relating to the
       transport protocol carrying telemetry
       data.";
      leaf protocol {
        type identityref {
          base oc-telemetry-types:STREAM_PROTOCOL;
        }
        description
          "Selection of the transport protocol for the telemetry
         stream.";
      }
    }  // grouping telemetry-stream-protocol-config

    grouping telemetry-stream-encoding-config {
      description
        "Configuration parameters relating to the
       encoding of telemetry data to and from the
       network element. The encoding method controls
       specifically the wire format of the telemetry
       data, and also controls which RPC framework
       may be in use to exchange telemetry data.";
      leaf encoding {
        type identityref {
          base oc-telemetry-types:DATA_ENCODING_METHOD;
        }
        description
          "Selection of the specific encoding or RPC framework
         for telemetry messages to and from the network element.";
      }
    }  // grouping telemetry-stream-encoding-config

    grouping telemetry-stream-destination-config {
      description
        "Configuration parameters for the stream destinations";
      leaf destination-address {
        type oc-inet:ip-address;
        description
          "IP address of the telemetry stream destination";
      }

      leaf destination-port {
        type uint16;
        description
          "Protocol (udp or tcp) port number for the telemetry
         stream destination";
      }
    }  // grouping telemetry-stream-destination-config

    grouping telemetry-stream-frequency-config {
      description
        "Config parameters for the frequency of updates to
        the collector";
      leaf sample-interval {
        type uint64;
        description
          "Time in milliseconds between the device's sample of a
         telemetry data source. For example, setting this to 100
         would require the local device to collect the telemetry
         data every 100 milliseconds. There can be latency or jitter
         in transmitting the data, but the sample must occur at
         the specified interval.

         The timestamp must reflect the actual time when the data
         was sampled, not simply the previous sample timestamp +
         sample-interval.

         If sample-interval is set to 0, the telemetry sensor
         becomes event based. The sensor must then emit data upon
         every change of the underlying data source.";
      }
    }  // grouping telemetry-stream-frequency-config

    grouping telemetry-sensor-specification {
      description
        "Config related to creating telemetry sensor groups. A sensor
       group is a related set of sensor paths and/or filters to
       exclude items. A group is assigned a reusable identifer, so
       it can be used in multiple telemetry subscriptions.";
      list telemetry-sensor-group {
        key "telemetry-sensor-group-id";
        description
          "List of telemetry sensor groups";
        leaf telemetry-sensor-group-id {
          type string;
          description
            "The sensor group identifer is a reusable handle which
           identifies a single sensor group. It is referenced from
           the subscription configuration.";
        }

        uses telemetry-sensor-paths;
      }  // list telemetry-sensor-group
    }  // grouping telemetry-sensor-specification

    grouping telemetry-sensor-paths {
      description
        "This grouping contains these paths to leaves or containers
       in the data model which are the sources of telemetry
       information.";
      list telemetry-sensor-paths {
        key "telemetry-sensor-path";
        description
          "A list of sensor paths and exclude filters which comprise
         a sensor grouping";
        leaf telemetry-sensor-path {
          type string;
          description
            "The sensor path is a path to a portion of operational
           state of interest in the data model";
        }

        leaf sensor-exclude-filter {
          type string;
          description
            "The exclude filter allows certain values of state to be
           filtered out of the telemetry stream";
        }
      }  // list telemetry-sensor-paths
    }  // grouping telemetry-sensor-paths

    grouping telemetry-local-source-address-config {
      description
        "Config relating to the local source address for telemetry
       messages";
      leaf local-source-address {
        type oc-inet:ip-address;
        description
          "The IP address which will be the source of packets from
         the device to a telemetry collector destination.";
      }
    }  // grouping telemetry-local-source-address-config

    uses telemetry-top;
  }  // module openconfig-telemetry