module openconfig-p4rt {

    yang-version 1;

    namespace
      "http://openconfig.net/yang/p4rt";

    prefix oc-p4rt;

    import openconfig-extensions {
      prefix oc-ext;
    }
    import openconfig-interfaces {
      prefix oc-if;
    }
    import openconfig-platform {
      prefix oc-platform;
    }
    import openconfig-system-grpc {
      prefix oc-grpc;
    }

    organization "OpenConfig Working Group";

    contact "www.openconfig.net";

    description
      "This module defines a set of extensions that provide P4Runtime (P4RT)
    specific extensions to the OpenConfig data models. Specifically, these
    parameters for configuration and state provide extensions that control
    the P4RT service, or allow it to be used alongside other OpenConfig
    data models.

    The P4RT protocol specification is linked from https://p4.org/specs/
    under the P4Runtime heading.";

    revision "2023-12-13" {
      description "Remove unused chassis id";
      reference
        "1.0.0";

    }

    revision "2022-08-19" {
      description
        "Add chassis grouping and chassis-id";
      reference
        "0.4.0";

    }

    revision "2022-06-08" {
      description
        "Add valid range for interface identifier and update node
      descriptions per P4 Runtime Specification.";
      reference
        "0.3.0";

    }

    revision "2021-07-20" {
      description
        "Add identity for P4RT as a gRPC service.";
      reference
        "0.2.0";

    }

    revision "2021-04-06" {
      description "Initial revision.";
      reference
        "0.1.0";

    }

    oc-ext:openconfig-version "1.0.0";

    identity P4RT {
      base oc-grpc:GRPC_SERVICE;
      description
        "P4RT: P4 Runtime (P4RT) Service.";
    }

    grouping p4rt-interface-config {
      description
        "Interface-specific configuration that is applicable to devices that
      are running the P4RT service.";
      leaf id {
        type uint32 {
          range "1..4294967039";
        }
        description
          "The numeric identifier (SDN Port) used by the controller to
        address the interface. This ID is assigned by an
        external-to-the-device entity (e.g., an SDN management system)
        to establish an externally deterministic numeric reference for
        the interface. The programming entity must ensure that the ID is
        unique within the required context.

        Note that this identifier is used only when a numeric reference
        to the interface is required, it does not replace the unique
        name assigned to the interface.

        Ranges:

        0x00000000: Unspecified/Invalid
        0x00000001: Minimum Port Value
        0xFFFFFEFF: Maximum Port Value

        Reserved:   0xFFFFFFF0 - 0xFFFFFFFF
        0xFFFFFFFA: Recirculate
        0xFFFFFFFD: CPU
        ";
        reference
          "P4 Runtime Specification v1.3.0
          https://p4.org/p4-spec/p4runtime/main/P4Runtime-Spec.html#sec-translation-of-port-numbers";

      }
    }  // grouping p4rt-interface-config

    grouping p4rt-ic-config {
      description
        "Integrated-circuit specific configuration that is applicable to devices
      that are running the P4RT service.";
      reference
        "P4 Runtime Specification v1.3.0
        https://p4.org/p4-spec/p4runtime/main/P4Runtime-Spec.html#sec-write-rpc";

      leaf node-id {
        type uint64;
        description
          "The numeric ID (device_id) used by the controller to address
        the integrated circuit, which may be referred to as a 'device',
        'node' or 'target' by the P4RT specification.

        Each switching ASIC (i.e., node) is addressed by the external
        entity based on its numeric identifier.

        The node ID is specified in addition to the string identifier
        assigned to the integrated circuit within the
        /components/component list.";
      }
    }  // grouping p4rt-ic-config

    augment /oc-if:interfaces/oc-if:interface/oc-if:config {
      description
        "Add interface-specific intended configuration for P4RT.";
      uses p4rt-interface-config;
    }

    augment /oc-if:interfaces/oc-if:interface/oc-if:state {
      description
        "Add interface-specific applied configuration for P4RT.";
      uses p4rt-interface-config;
    }

    augment /oc-platform:components/oc-platform:component/oc-platform:integrated-circuit/oc-platform:config {
      description
        "Add integrated circuit specific intended configuration that is required
      for P4RT.";
      uses p4rt-ic-config;
    }

    augment /oc-platform:components/oc-platform:component/oc-platform:integrated-circuit/oc-platform:state {
      description
        "Add integrated circuit specific operational state that is required
      for P4RT.";
      uses p4rt-ic-config;
    }
  }  // module openconfig-p4rt