A Controller may have multiple auxiliary connections as
specified by the Openflow protocol. The main Controller
connection should always have the auxiliary-id set to zero.
All other connections must have an auxiliary-id different
from 0.
auxiliary-id
uint8
A Controller may have multiple auxiliary connections as
specified by the Openflow protocol. The main Controller
connection should always have the auxiliary-id set to zero.
All other connections must have an auxiliary-id different
from 0.
auxiliary-id
uint8
A Controller may have multiple auxiliary connections as
specified by the Openflow protocol. The main Controller
connection should always have the auxiliary-id set to zero.
All other connections must have an auxiliary-id different
from 0.
datapath-id
string
The datapath-id type represents an OpenFlow
datapath identifier. The lower 48-bits are for
a MAC address, while the upper 16-bits are
implementer-defined.
datapath-id
string
The datapath-id type represents an OpenFlow
datapath identifier. The lower 48-bits are for
a MAC address, while the upper 16-bits are
implementer-defined.
datapath-id
string
The datapath-id type represents an OpenFlow
datapath identifier. The lower 48-bits are for
a MAC address, while the upper 16-bits are
implementer-defined.