module openconfig-evpn {

    yang-version 1;

    namespace
      "http://openconfig.net/yang/evpn";

    prefix oc-evpn;

    import openconfig-yang-types {
      prefix oc-yang;
    }
    import openconfig-extensions {
      prefix oc-ext;
    }
    import openconfig-network-instance-types {
      prefix oc-ni-types;
    }
    import openconfig-evpn-types {
      prefix oc-evpn-types;
    }
    import openconfig-inet-types {
      prefix oc-inet;
    }
    import openconfig-interfaces {
      prefix oc-if;
    }
    import openconfig-bgp-types {
      prefix oc-bgp-types;
    }
    import openconfig-types {
      prefix oc-types;
    }

    organization "OpenConfig working group";

    contact
      "OpenConfig working group
netopenconfig@googlegroups.com";

    description
      "This module contains general data definitions for use in EVPN.
The model contains the configuration and state attributes
imported by the OpenConfig network instance module that is
the primary holder of these properties.

The module describes the configuration and state parameters
to support the instantiation of the MAC-VRF concept defined
in the RFC 7432: BGP MPLS-Based Ethernet VPN.
The EVPN concept allows the  Media Access Control (MAC) addresses
forwarding through the control plane on a PE.

Within the OpenConfig model, a single network instance represents
an individual MAC VRF. Whilst it is possible that there may be
cases where a single MAC VRF may support multiple broadcast
domains, this is not currently supported and requires an extension
of the model.";

    revision "2024-04-03" {
      description
        "Add vni-peer-groups container";
      reference
        "0.8.0";

    }

    revision "2024-02-01" {
      description
        "Add counters under endpoint-peer and endpoint-vni";
      reference
        "0.7.0";

    }

    revision "2023-07-12" {
      description "Removed ethernet segment";
      reference
        "0.6.0";

    }

    revision "2023-03-08" {
      description
        "Change control-plane-vnis property to leaf-list";
      reference
        "0.5.0";

    }

    revision "2023-01-24" {
      description "Add control word support";
      reference
        "0.4.0";

    }

    revision "2021-06-28" {
      description
        "Add vxlan endpoint oper data";
      reference
        "0.3.0";

    }

    revision "2021-06-11" {
      description
        "Structural update for arp-proxy and
nd-proxy.";
      reference
        "0.2.0";

    }

    revision "2020-11-24" {
      description "Initial revision.";
      reference
        "0.1.0";

    }

    oc-ext:openconfig-version "0.8.0";

    grouping evpn-config-top {
      description
        "Configuration attributes of the EVPN Instance";
      container evpn-instances {
        description
          "Configuration attributes of the EVPN Instance";
        list evpn-instance {
          key "evi";
          description
            "An EVPN instance (EVI) comprises Customer Edge devices
(CEs) that are connected to Provider Edge devices (PEs). One
network instance (representing a single MAC VRF) can
participate in one or more EVPN Instances. For each EVPN instance
in which the forwarding instance participates an
EVPN instance needs to be created.

The model supports BGP MPLS-Based Ethernet VPNs
(RFC 7432) and  Network Virtualization Overlay Solution
Using Ethernet VPN (RFC 8365). The use of MPLS or VXLAN
is selected via the encapsulation container within
EVPN instance. One use case requiring participating in
two EVIs is the Interconnect Solution for EVPN Overlay
networks (see draft-ietf-bess-dci-evpn-overlay-10)";
          leaf evi {
            type leafref {
              path "../config/evi";
            }
            description
              "EVPN Intance (EVI) identifier";
          }

          container config {
            description
              "EVPN Configuration parameters for
the participation in an EVPN Intance.";
            uses evpn-evi-common-config;
          }  // container config

          container state {
            config false;
            description
              "EVPN State parameters for
the participation in an EVPN Intance.";
            uses evpn-evi-common-config;
          }  // container state

          uses evpn-import-export-policy-top;

          uses evpn-evi-overlay-top;

          uses evpn-evi-pbb-top;
        }  // list evpn-instance
      }  // container evpn-instances
    }  // grouping evpn-config-top

    grouping evpn-import-export-policy-top {
      description
        "Top Level grouping for the import and export
route targets in a EVPN Instance.";
      container import-export-policy {
        description
          "Top container to set the import and export policies
associated with a EVI";
        container config {
          description
            "Configuration parameters to set the import and export policies
associated with a EVI";
          uses evpn-import-export-config;
        }  // container config

        container state {
          config false;
          description
            "State parameters of the import and export policies
associated with a EVI";
          uses evpn-import-export-config;
        }  // container state
      }  // container import-export-policy
    }  // grouping evpn-import-export-policy-top

    grouping evpn-arp-proxy-top {
      description
        "Top Container related to ARP-Proxy";
      container arp-proxy {
        description
          "Top Container related to ARP-Proxy";
        container config {
          description
            "Configuration data related to ARP-Proxy.";
          uses evpn-arp-proxy-config;
        }  // container config

        container state {
          config false;
          description
            "State data related to ARP-Proxy.";
          uses evpn-arp-proxy-config;
        }  // container state
      }  // container arp-proxy
    }  // grouping evpn-arp-proxy-top

    grouping evpn-nd-proxy-top {
      description
        "Top Container related to ND-Proxy";
      container nd-proxy {
        description
          "Top Container related to ND-Proxy.";
        container config {
          description
            "Configuration data related to ND-Proxy.";
          uses evpn-nd-proxy-config;
        }  // container config

        container state {
          config false;
          description
            "State data related to ND-Proxy.";
          uses evpn-nd-proxy-config;
        }  // container state
      }  // container nd-proxy
    }  // grouping evpn-nd-proxy-top

    grouping evpn-arp-proxy-config {
      description
        "Configuration data related to ARP-Proxy";
      leaf enable {
        type boolean;
        default "false";
        description
          "Enable (TRUE) or disable (FALSE) ARP proxy. If true
a proxy server on the network answers the
Address Resolution Protocol (ARP) queries for an
IP address that is not on that network.";
      }

      leaf arp-suppression {
        type boolean;
        default "false";
        description
          "Enable (TRUE) or disable (FALSE) ARP suppression. If true
the  Address Resolution Protocol (ARP) queries for an
IP address that is not on that network are suppressed.
Address Resolution Protocol (ARP) suppression is a
technique used to reduce the amount of ARP broadcast
flooding within individual VXLAN segments, that is between
VMs connected to the same logical switch.";
        reference
          "draft-ietf-bess-evpn-proxy-arp-nd-13
           RFC 7432: BGP MPLS-Based Ethernet VPN";

      }

      leaf ip-mobility-threshold {
        type uint16;
        description
          "Enable (TRUE) or disable (FALSE). It is possible for a given host
or end-station (as defined by its IP address) to move from one
Ethernet segment to another. The number of IP mobility events that
are detected for a given IP address within the detection-threshold
before it is identified as a duplicate IP address.
Once the detection threshold is reached, updates for the IP address
are suppressed.";
      }

      leaf duplicate-ip-detection-interval {
        type uint16;
        description
          "The time interval used in detecting a duplicate IP address.
Duplicate ip detection number of host moves
allowed within interval period";
      }
    }  // grouping evpn-arp-proxy-config

    grouping evpn-nd-proxy-config {
      description
        "Configuration data related to Neighbor Discovery (ND)
 proxy";
      leaf enable {
        type boolean;
        default "false";
        description
          "Enable (TRUE) or disable (FALSE) Neighbor Discovery (ND)
proxy. If true a proxy server on the network answers the
NDP packets for an IP address that is not on that network.";
        reference
          "draft-ietf-bess-evpn-proxy-arp-nd-13
           RFC 7432: BGP MPLS-Based Ethernet VPN";

      }

      leaf nd-suppression {
        type boolean;
        default "false";
        description
          "Enable (TRUE) or disable (FALSE) Neighbor Discovery suppression.
If true the NDP queries for an IP address that is not on that
network are suppressed. NDP suppression is a
technique used to reduce the amount of NDP Packets
flooding within individual VXLAN segments, that is between
VMs connected to the same logical switch.";
      }

      leaf ip-mobility-threshold {
        type uint16;
        description
          "Enable (TRUE) or disable (FALSE). It is possible for a given host
or end-station (as defined by its IP address) to move from one
Ethernet segment to another. The number of IP mobility events that
are detected for a given IP address within the detection-threshold
before it is identified as a duplicate IP address.
Once the detection threshold is reached, updates for the IP address
are suppressed.";
      }

      leaf duplicate-ip-detection-interval {
        type uint16;
        description
          "The time interval used in detecting a duplicate IP address.
Duplicate ip detection number of host moves
allowed within interval period";
      }
    }  // grouping evpn-nd-proxy-config

    grouping evpn-mac-vrf-config {
      description
        "Configuration data related to mac-vrf";
      leaf anycast-gateway-mac {
        type oc-yang:mac-address;
        description
          "Configure the anycast gateway MAC address that all VTEPs
use for the network instance. When a VM sends an Address
Resolution Protocol (ARP) request for the anycast gateway
IP address in a VXLAN virtual network, the VTEP responds
with the configured anycast MAC address.";
      }

      leaf flood-unknown-unicast-supression {
        type boolean;
        default "false";
        description
          "Enable (TRUE) or disable (FALSE) the Unknown Unicast Flooding
Suppression. If the Unknown Unicast Flooding Suppression is on,
the unicast traffic towards an unknown host will be dropped.";
      }
    }  // grouping evpn-mac-vrf-config

    grouping evpn-mac-mobility-config {
      description
        "Configuration data related to mac-vrf";
      leaf mac-mobility {
        type boolean;
        description
          "Enable (TRUE) or disable (FALSE). It is possible for a given host
or end-station (as defined by its MAC address) to move from one
Ethernet segment to another; this is referred to as 'MAC Mobility'
or 'MAC move. The configuration attributes includes: mac-mobility-window
and mac-mobility-threshold";
      }

      leaf mac-mobility-window {
        type uint16 {
          range "0..600";
        }
        default "180";
        description
          "The time interval used in detecting a duplicate MAC address.
The value can be from 5 through 600 seconds.
The default is 180 seconds";
        reference
          "RFC 7432: BGP MPLS-Based Ethernet VPN section-15";

      }

      leaf mac-mobility-threshold {
        type uint8 {
          range "0..50";
        }
        default "5";
        description
          "The number of MAC mobility events that are detected for a
given MAC address within the detection-window before it is identified
as a duplicate MAC address. Once the detection threshold is reached,
updates for the MAC address are suppressed.";
        reference
          "RFC 7432: BGP MPLS-Based Ethernet VPN section-15";

      }

      leaf ip-mobility-threshold {
        type uint16;
        description
          "Enable (TRUE) or disable (FALSE). It is possible for a given host
or end-station (as defined by its IP address) to move from one
Ethernet segment to another. The number of IP mobility events that
are detected for a given IP address within the detection-threshold
before it is identified as a duplicate IP address.
Once the detection threshold is reached, updates for the IP address
are suppressed.";
      }

      leaf duplicate-ip-detection-interval {
        type uint16;
        description
          "The time interval used in detecting a duplicate IP address.
Duplicate ip detection number of host moves
allowed within interval period";
      }
    }  // grouping evpn-mac-mobility-config

    grouping evpn-mac-mobility-top {
      description
        "Top grouping the configuration and state data related to mac
mobility.";
      container mac-mobility {
        description
          "Top grouping the configuration and state data related to mac
mobility.";
        container config {
          description
            "Configuration data related to mac mobility.";
          uses evpn-mac-mobility-config;
        }  // container config

        container state {
          config false;
          description
            "State data related to mac mobility.";
          uses evpn-mac-mobility-config;
        }  // container state
      }  // container mac-mobility
    }  // grouping evpn-mac-mobility-top

    grouping evpn-evi-common-config {
      description
        "Top-Level parameters related the configuration of
EVPN to partipate in one EVPN instance";
      leaf evi {
        type string;
        description
          "EVPN Instance (EVI) identifier";
      }

      leaf encapsulation-type {
        type identityref {
          base oc-ni-types:ENCAPSULATION;
        }
        description
          "The on-the-wire encapsulation that should be used when
exchanging traffic from this network instance to/from
destinations belonging to the EVI. The use of MPLS or
VXLAN is selected using this container.";
      }

      leaf service-type {
        type identityref {
          base oc-evpn-types:EVPN_TYPE;
        }
        description
          "Specifies the type of EVPN that is being created according
to the values in the EVPN_TYPES identity.
The options are VLAN-based, VLAN-Bundle or VLAN-aware.
VLAN-Based services consists of an EVPN instance of only a
single broadcast domain, the proper network-instance type used
for this kind of services is L2VSI.";
        reference
          "RFC 7432: BGP MPLS-Based Ethernet VPN";

      }

      leaf multicast-group {
        type oc-inet:ip-address;
        description
          "Multicast group address for BUM traffic";
      }

      leaf multicast-mask {
        type oc-inet:ip-address;
        description
          "Multicast group address mask";
      }

      leaf replication-mode {
        type enumeration {
          enum "STATIC_INGRESS_REPLICATION" {
            value 0;
            description
              "Static ingress replication mode.";
          }
          enum "BGP" {
            value 1;
            description
              "BGP EVPN ingress replication mode. It includes the ability to
signal a P2MP LSP for the EVPN Inclusive Provider Tunnel
for BUM traffic";
          }
          enum "MULTICAST" {
            value 2;
            description
              "Multicast enabled in the underlay for BUM traffic";
          }
        }
        description
          "Replication mode to handle BUM traffic";
      }

      leaf route-distinguisher {
        type union {
          type oc-ni-types:route-distinguisher;
          type enumeration {
            enum "AUTO" {
              value 0;
              description
                "Enable auto route-distinguisher generation.
When used for evpn and if not configured, the
RD is auto-derived with the format <ip-address>:<evi> where
ip-address is the ipv4 address associated to the
system loopback or sub-interface.";
              reference
                "RFC 7432: BGP MPLS-Based Ethernet VPN page-18";

            }
          }
        }
        description
          "Route Distinguisher (RD) associated to the EVPN-instance.
An RD MUST be assigned for a given EVPN-instance on a PE.
This RD MUST be unique across all EVPN-instances on a PE.
The route-distinguisher at this level overrides
the route-distinguisher value defined under
network-instance/config.";
        reference
          "RFC 7432: BGP MPLS-Based Ethernet VPN page-18";

      }

      leaf control-word-enabled {
        type boolean;
        description
          "When true, the control word is signaled and sent.";
        reference
          "RFC8214 Virtual Private Wire Service Support
          in Ethernet VPN
           draft-ietf-bess-rfc7432bis-05 BGP MPLS-Based
          Ethernet VPN";

      }
    }  // grouping evpn-evi-common-config

    grouping evpn-import-export-config {
      description
        "Parameters for import and export policy";
      leaf-list export-route-target {
        type union {
          type oc-bgp-types:bgp-ext-community-type;
          type enumeration {
            enum "AUTO" {
              value 0;
              description
                "Enable auto route-target generation.
When used for EVPN and if not configured, the RT is auto-derived
with the format <asn>:<evi> where 'asn' is the autonomous-system
configured in the network-instance default.
Auto-derived route targets simplify the configuration of
VLAN services for EVPN, especially in VLAN-aware bundle
services where you can have multiple VLANs, multiple
bridge domains and the VLANS for a given service are
not present on all PE devices.";
            }
          }
        }
        description
          "Export Route Target (RT) in the network-instance on a PE.";
        reference
          "RFC 7432: BGP MPLS-Based Ethernet VPN page-19";

      }

      leaf-list import-route-target {
        type union {
          type oc-bgp-types:bgp-ext-community-type;
          type enumeration {
            enum "AUTO" {
              value 0;
              description
                "Enable auto route-target generation.
When used for EVPN and if not configured, the RT is auto-derived
with the format <asn>:<evi> where 'asn' is the autonomous-system
configured in the network-instance default.
Auto-derived route targets simplify the configuration of
VLAN services for EVPN, especially in VLAN aware bundle
services where you can have multiple VLANs, multiple
bridge domains and the VLANS for a given service are
not present on all PE devices.";
            }
          }
        }
        description
          "Import Route Target (RT) in the network-instance on a PE.";
        reference
          "RFC 7432: BGP MPLS-Based Ethernet VPN page-19";

      }
    }  // grouping evpn-import-export-config

    grouping evpn-evi-overlay-top {
      description
        "Top grouping related the configuration of
Network Virtualization Overlay Solution
Using Ethernet VPN";
      container vxlan {
        description
          "Top container related to Overlay Solution in EVPN.";
        container config {
          description
            "Configuration data related to Overlay Solution in EVPN.";
          uses evpn-evi-overlay-config;
        }  // container config

        container state {
          config false;
          description
            "State data related to Overlay Solution in EVPN.";
          uses evpn-evi-overlay-config;
        }  // container state

        uses evpn-vxlan-anycast-config;
      }  // container vxlan
    }  // grouping evpn-evi-overlay-top

    grouping evpn-evi-overlay-config {
      description
        "Parameters related the configuration of Network Virtualization Overlay Solution
Using Ethernet VPN";
      leaf vni {
        type oc-evpn-types:vni-id;
        description
          "Virtual Network Identifier (VNI) associated to the EVI. This VNI is used for
ingress and egress in the VXLAN domain.";
      }

      leaf overlay-endpoint-network-instance {
        type leafref {
          path
            "/network-instances/network-instance/name";
        }
        description
          "The network instance to resolve the overlay-endpoint within.";
      }

      leaf overlay-endpoint {
        type leafref {
          path
            "/network-instances/network-instance[name=current()/../overlay-endpoint-network-instance]/connection-points/connection-point/endpoints/endpoint/config/endpoint-id";
        }
        description
          "Associate the EVI with an VXLAN Endpoint defined under connection
points. The network instance to resolve the overlay-endpoint within.";
      }

      leaf host-reachability-bgp {
        type boolean;
        description
          "Enable or Disable the BGP control plane to be
used to exchange  updates from the NVE interface";
      }

      leaf multicast-group {
        type oc-inet:ip-address;
        description
          "Multicast group address for BUM traffic";
      }

      leaf multicast-mask {
        type oc-inet:ip-address;
        description
          "Multicast group address mask";
      }
    }  // grouping evpn-evi-overlay-config

    grouping evpn-vxlan-anycast-config {
      description
        "Anycast source interface top grouping";
      container anycast-source-interface {
        description
          "Anycast source interface references";
        container config {
          description
            "Anycast source interface configuration references";
          uses oc-if:interface-ref-common;
        }  // container config

        container state {
          config false;
          description
            "Anycast source interface state references";
          uses oc-if:interface-ref-common;
        }  // container state
      }  // container anycast-source-interface
    }  // grouping evpn-vxlan-anycast-config

    grouping evpn-parameters-pbb-isid-config {
      description
        "I-component identifier configuration parameters.
In PBB-EVPN [RFC7623] the use of GWs where I-components and
associated B-components are part of EVI instances is required.";
      leaf i-sid {
        type uint32 {
          range "0..16777215";
        }
        description
          "Service Instance Identifier 24 bits and global within a PBB
network. I-SID defines the service instance that the frame should be
mapped to.";
        reference
          "RFC 7080: Virtual Private LAN Service (VPLS) Interoperability
          with Provider Backbone Bridges.";

      }
    }  // grouping evpn-parameters-pbb-isid-config

    grouping evpn-parameters-pbb-config {
      description
        "I-component identifier configuration parameters.
In PBB-EVPN [RFC7623] the use of GWs where I-components and
associated B-components are part of EVI instances is required.
These parameters includes the association between I and B
components.";
      leaf b-component-name {
        type string;
        description
          "Type of the associated b-component";
      }

      leaf backbone-src-mac {
        type oc-yang:mac-address;
        description
          "EVPN will run independently in both components,
the I-component MAC-VRF and B-component MAC-VRF.
The backbone-src-mac assigns the b-component MAC.";
      }
    }  // grouping evpn-parameters-pbb-config

    grouping evpn-parameters-pbb-icomponent-config {
      description
        "Parameters to configure components contained
in a backbone edge bridge that containes the customer
space (customer MAC addresses,S-VLAN).";
      container i-components {
        description
          "i-components container definition.";
        list i-component {
          key "i-sid";
          description "list of i-components";
          leaf i-sid {
            type leafref {
              path "../config/i-sid";
            }
            description
              "I-SID represents a unique service identifier associated with
service instances";
          }

          container config {
            description
              "Configuration variables for the i-sid";
            uses evpn-parameters-pbb-isid-config;
          }  // container config

          container state {
            config false;
            description
              "State variables for the i-sid";
            uses evpn-parameters-pbb-isid-config;
          }  // container state
        }  // list i-component
      }  // container i-components
    }  // grouping evpn-parameters-pbb-icomponent-config

    grouping evpn-evi-pbb-config {
      description
        "Provider Backbone Bridging (PBB) parameters grouping";
      reference
        "IEEE 802.1ah Provider Backbone Bridge";

      list b-component {
        key "b-component-name";
        description
          "List of B-components. The b-component learns and forwards
traffic on the backbone in order to reduce the number of
BGP MAC Advertisement routes by aggregating Customer/Client
MAC (C-MAC) addresses via Provider Backbone MAC (B-MAC) address.";
        reference
          "RFC 7623: Provider Backbone Bridging Combined
          with Ethernet VPN (PBB-EVPN).";

        leaf b-component-name {
          type leafref {
            path
              "../config/b-component-name";
          }
          description
            "Provider Backbone Bridging component name.";
        }

        container config {
          description
            "Configuration variables for the b-components.";
          uses evpn-parameters-pbb-config;
        }  // container config

        container state {
          config false;
          description
            "State variables for the b-components.";
          uses evpn-parameters-pbb-config;
        }  // container state

        uses evpn-parameters-pbb-icomponent-config;
      }  // list b-component
    }  // grouping evpn-evi-pbb-config

    grouping evpn-evi-pbb-top {
      description
        "Grouping for pbb configuration parameters";
      container pbb {
        description
          "Container for EVPN with PBB PE functionality
for scaling over MPLS,";
        uses evpn-evi-pbb-config;
      }  // container pbb
    }  // grouping evpn-evi-pbb-top

    grouping evpn-vxlan-parameters-config {
      description
        "Type agnostic configuration parameters relating to the
overlay of the network instance";
      leaf description {
        type string;
        description
          "Description to identify the VXLAN tunnel endpoint It
is a unique name identifying the overlay endpoint";
      }

      leaf enabled {
        type boolean;
        description
          "VXLAN tunnel endpoint administrative state.";
      }

      leaf source-interface {
        type string;
        description
          "Source loopback interface name";
      }
    }  // grouping evpn-vxlan-parameters-config

    grouping evpn-overlays-grp-top {
      description
        "Parameters relating to the overlay tunnel endpoints";
      container config {
        description
          "Configuration parameters relating to the overlay tunnel
endpoints of the network instance";
        uses evpn-vxlan-parameters-config;
      }  // container config

      container state {
        config false;
        description
          "State parameters relating to the overlay tunnel endpoints of
the network instance";
        uses evpn-vxlan-parameters-config;
      }  // container state

      container endpoint-peers {
        config false;
        description
          "Top level container for state information related to peer VXLAN Tunnel
Endpoints(VTEPs) learned by the local VTEP in the default network
instance";
        list endpoint-peer {
          key "peer-address";
          description
            "List of VTEP peers and associated state information";
          leaf peer-address {
            type leafref {
              path "../state/peer-address";
            }
            description
              "IP address for the VTEP peer";
          }

          container state {
            config false;
            description
              "Container for state parameters related to this VTEP peer";
            uses evpn-endpoint-peer-state;

            uses evpn-endpoint-counters;
          }  // container state

          container vni-peer-groups {
            config false;
            description
              "Container for associating ingress and egress VNIs to router MACs";
            list vni-peer-group {
              key "cp-vni egress-vni";
              description
                "List of VNI peer groups";
              leaf cp-vni {
                type leafref {
                  path "../state/cp-vni";
                }
                description
                  "A reference to the control-plane VNI for the VNI peer group";
              }

              leaf egress-vni {
                type leafref {
                  path "../state/egress-vni";
                }
                description
                  "A reference to the egress VNI for the VNI peer group";
              }

              container state {
                config false;
                description
                  "State container for the VNI peer group";
                leaf cp-vni {
                  type oc-evpn-types:vni-id;
                  description
                    "The control-plane VNI discovered behind this peer VTEP";
                }

                leaf egress-vni {
                  type oc-evpn-types:vni-id;
                  description
                    "Egress VNI associated with the remote VTEP";
                }

                leaf router-mac {
                  type oc-yang:mac-address;
                  description
                    "MAC address of the remote VTEP";
                }
              }  // container state
            }  // list vni-peer-group
          }  // container vni-peer-groups
        }  // list endpoint-peer
      }  // container endpoint-peers

      container endpoint-vnis {
        config false;
        description
          "Top level container for state information related to Layer 2 virtual
network identifiers (L2VNIs) and Layer 3 virtual network identifiers
(L3VNIs) that are learned on the local VXLAN Tunnel End Point from
remote VTEPs in the default network instance";
        list endpoint-vni {
          key "vni";
          description
            "List of L2VNIs and L3VNIs learned on the local VTEP";
          leaf vni {
            type leafref {
              path "../state/vni";
            }
            description
              "L2VNI or L3VNI Identifier";
          }

          container state {
            config false;
            description
              "Container for state parameters related to this L2VNI or L3VNI";
            uses evpn-endpoint-vni-state;
          }  // container state

          uses ipv4-top;

          uses ipv6-top;
        }  // list endpoint-vni
      }  // container endpoint-vnis
    }  // grouping evpn-overlays-grp-top

    grouping evpn-endpoint-peer-state {
      description
        "Grouping for state information related to peer VXLAN Tunnel
Endpoints(VTEPs) learned by the local VTEP";
      leaf peer-address {
        type oc-inet:ip-address;
        description
          "IP address of the remote VXLAN Tunnel Endpoint peer";
      }

      leaf peer-state {
        type enumeration {
          enum "UP" {
            value 0;
            description
              "Operational status of the remote VTEP to indicate that the peer
status is UP";
          }
          enum "DOWN" {
            value 1;
            description
              "Operational status of the remote VTEP to indicate that the peer
status is DOWN";
          }
        }
        description
          "State parameters related to the remote VTEP peer state";
      }

      leaf uptime {
        type oc-types:timeticks64;
        description
          "This timestamp indicates the time elapsed relative to the moment that
the remote VTEP peer was discovered.";
      }

      leaf-list control-plane-vnis {
        type oc-evpn-types:vni-id;
        status deprecated;
        description
          "The control-plane VNIs are all of the VNIs that are discovered by the
control-plane behind this peer VTEP";
      }

      leaf router-mac {
        type oc-yang:mac-address;
        status deprecated;
        description
          "MAC address of the remote VTEP";
      }
    }  // grouping evpn-endpoint-peer-state

    grouping evpn-endpoint-counters {
      description
        "Grouping for Operational state regarding encapsulated traffic.";
      container counters {
        description
          "Operational state regarding encapsulated traffic.";
        leaf total-encap-pkts {
          type oc-yang:counter64;
          description
            "The total number of encapsulated packets.";
        }

        leaf total-encap-bytes {
          type oc-yang:counter64;
          description
            "The total number of encapsulated bytes.";
        }

        leaf bum-encap-pkts {
          type oc-yang:counter64;
          description
            "The total number of encapsulated BUM packets.";
        }

        leaf total-decap-pkts {
          type oc-yang:counter64;
          description
            "The total number of decapsulated packets.";
        }

        leaf total-decap-bytes {
          type oc-yang:counter64;
          description
            "The total number of decapsulated bytes.";
        }

        leaf unicast-decap-pkts {
          type oc-yang:counter64;
          description
            "The total number of decapsulated unicast packets.";
        }

        leaf bum-decap-pkts {
          type oc-yang:counter64;
          description
            "The total number of decapsulated BUM packets.";
        }

        leaf bum-decap-multicast-pkts {
          type oc-yang:counter64;
          description
            "The number of decapsulated BUM packets received via underlay multicast.";
        }

        leaf bum-decap-ir-pkts {
          type oc-yang:counter64;
          description
            "The number of decapsulated BUM packets received via underlay ingress replication.";
        }

        leaf drop-decap-pkts {
          type oc-yang:counter64;
          description
            "The total number of decapsulated packets that have been dropped locally.";
        }

        leaf except-decap-pkts {
          type oc-yang:counter64;
          description
            "The total number of decapsulated packets that hit an exceptional condition.";
        }
      }  // container counters
    }  // grouping evpn-endpoint-counters

    grouping ipv4-top {
      description
        "Grouping for Operational state of IPv4 address family.";
      container ipv4 {
        description
          "Parameters for the IPv4 address family.";
        container state {
          config false;
          description
            "Top level IPv4 operational state data.";
          uses evpn-endpoint-counters;
        }  // container state
      }  // container ipv4
    }  // grouping ipv4-top

    grouping ipv6-top {
      description
        "Grouping for Operational state of IPv6 address family.";
      container ipv6 {
        description
          "Parameters for the IPv6 address family.";
        container state {
          config false;
          description
            "Top level IPv6 operational state data.";
          uses evpn-endpoint-counters;
        }  // container state
      }  // container ipv6
    }  // grouping ipv6-top

    grouping evpn-endpoint-vni-state {
      description
        "Grouping for L2VNI and L3VNI state information learned on the
local VXLAN Tunnel End Point from remote VTEPs";
      leaf vni {
        type oc-evpn-types:evi-id;
        description
          "L2VNI or L3VNI Identifier";
      }

      leaf multidestination-traffic {
        type union {
          type oc-inet:ip-address;
          type enumeration {
            enum
              "STATIC_INGRESS_REPLICATION" {
              value 0;
              description
                "Static ingress replication mode.";
            }
            enum "BGP_INGRESS_REPLICATION" {
              value 1;
              description
                "BGP EVPN ingress replication mode. It includes the ability to
signal a P2MP LSP for the EVPN Inclusive Provider Tunnel
for BUM traffic";
            }
          }
        }
        description
          "The data plane for overlays needs to handle the transport of
multidestination traffic. Multidestination traffic is typically
referred to as (BUM) which stands for broadcast, unknown unicast,
or multicast. The two most common methods that can accommodate this
replication and transport in the underlay are IP multicast and
ingress replication
(also called head-end replication or unicast mode).";
      }

      leaf learning-mode {
        type oc-evpn-types:learning-mode;
        description
          "Indicates whether the learning mode for this VNI is either
control-plane or data-plane";
      }

      leaf vni-type {
        type enumeration {
          enum "L2" {
            value 0;
            description
              "This is a Layer 2 service virtual network identifier (L2VNI)
that is used for communication within the same subnet or
broadcast domain";
          }
          enum "L3" {
            value 1;
            description
              "This is a Layer 3 service virtual network identifier (L3VNI)
or VRF VNI that is used for communication between subnets";
          }
        }
        description
          "The type of virtual network identfier";
      }

      leaf vni-state {
        type enumeration {
          enum "UP" {
            value 0;
            description
              "Operational status of the virtual network identifier (VNI) to
indicate that it is UP";
          }
          enum "DOWN" {
            value 1;
            description
              "Operational status of the virtual network identifier (VNI) to
indicate that it is DOWN";
          }
        }
        description
          "Operational state of the L2VNI or L3VNI";
      }

      leaf svi-state {
        type enumeration {
          enum "UP" {
            value 0;
            description
              "Operational status of the SVI mapped to the L3VNI used for routing
between subnets to indicate the SVI is UP";
          }
          enum "DOWN" {
            value 1;
            description
              "Operational status of the SVI mapped to the L3VNI used for routing
between subnets to indicate the SVI is DOWN";
          }
        }
        description
          "Operational status of the SVI mapped to the L3VNI that is used for
routing between subnets in the VXLAN fabric";
      }

      leaf bridge-domain {
        type uint32;
        description
          "This reflects the configured VLAN or Bridge Domain that maps to this
L2VNI in the VXLAN fabric";
      }

      leaf l3-vrf-name {
        type string;
        description
          "This refects the configured VRF instance that maps to this L3VNI
that is used for routing between subnets in the VXLAN fabric";
      }
    }  // grouping evpn-endpoint-vni-state
  }  // module openconfig-evpn