| aa-sub-scope |
enumeration |
The scope of the AA subscriber |
| aa-sub-scope |
enumeration |
The scope of the AA subscriber |
| aa-sub-scope |
enumeration |
The scope of the AA subscriber |
| aa-sub-scope |
enumeration |
The scope of the AA subscriber |
| aa-sub-scope |
enumeration |
The scope of the AA subscriber |
| access-loop-encap-1 |
union |
The encapsulation used on the DSL access loop |
| access-loop-encap-1 |
union |
The encapsulation used on the DSL access loop |
| access-loop-encap-1 |
union |
The encapsulation used on the DSL access loop |
| access-loop-encap-1 |
union |
The encapsulation used on the DSL access loop |
| access-loop-encap-1 |
union |
The encapsulation used on the DSL access loop |
| access-loop-encap-2 |
union |
The encapsulation used on the DSL access loop |
| access-loop-encap-2 |
union |
The encapsulation used on the DSL access loop |
| access-loop-encap-2 |
union |
The encapsulation used on the DSL access loop |
| access-loop-encap-2 |
union |
The encapsulation used on the DSL access loop |
| access-loop-encap-2 |
union |
The encapsulation used on the DSL access loop |
| accounting-session-id |
string |
Identification of a sbuscriber for the purposes of accounting |
| accounting-session-id |
string |
Identification of a sbuscriber for the purposes of accounting |
| accounting-session-id |
string |
Identification of a sbuscriber for the purposes of accounting |
| accounting-session-id |
string |
Identification of a sbuscriber for the purposes of accounting |
| accounting-session-id |
string |
Identification of a sbuscriber for the purposes of accounting |
| activity-threshold |
uint32 |
Indicates the threshold in Kbps that is applied to determine
if a subscriber is active.
If the traffic volume is below the threshold, the subscriber is idle.
Otherwise, the subscriber is active. |
| activity-threshold |
uint32 |
Indicates the threshold in Kbps that is applied to determine
if a subscriber is active.
If the traffic volume is below the threshold, the subscriber is idle.
Otherwise, the subscriber is active. |
| activity-threshold |
uint32 |
Indicates the threshold in Kbps that is applied to determine
if a subscriber is active.
If the traffic volume is below the threshold, the subscriber is idle.
Otherwise, the subscriber is active. |
| activity-threshold |
uint32 |
Indicates the threshold in Kbps that is applied to determine
if a subscriber is active.
If the traffic volume is below the threshold, the subscriber is idle.
Otherwise, the subscriber is active. |
| activity-threshold |
uint32 |
Indicates the threshold in Kbps that is applied to determine
if a subscriber is active.
If the traffic volume is below the threshold, the subscriber is idle.
Otherwise, the subscriber is active. |
| ancp-string |
string |
This type identifies a valid ANCP string. |
| ancp-string |
string |
This type identifies a valid ANCP string. |
| ancp-string |
string |
This type identifies a valid ANCP string. |
| ancp-string |
string |
This type identifies a valid ANCP string. |
| ancp-string |
string |
This type identifies a valid ANCP string. |
| ancp-string-or-empty |
string |
This type identifies a valid ANCP string. |
| ancp-string-or-empty |
string |
This type identifies a valid ANCP string. |
| ancp-string-or-empty |
string |
This type identifies a valid ANCP string. |
| ancp-string-or-empty |
string |
This type identifies a valid ANCP string. |
| ancp-string-or-empty |
string |
This type identifies a valid ANCP string. |
| any-filter-name |
string |
The identification of any filter, including dynamic filters created
by the system |
| any-filter-name |
string |
The identification of any filter, including dynamic filters created
by the system |
| any-filter-name |
string |
The identification of any filter, including dynamic filters created
by the system |
| any-filter-name |
string |
The identification of any filter, including dynamic filters created
by the system |
| any-filter-name |
string |
The identification of any filter, including dynamic filters created
by the system |
| any-qos-policy-name |
string |
The identification of any qos policy, including dynamic policies
created by the system |
| any-qos-policy-name |
string |
The identification of any qos policy, including dynamic policies
created by the system |
| any-qos-policy-name |
string |
The identification of any qos policy, including dynamic policies
created by the system |
| any-qos-policy-name |
string |
The identification of any qos policy, including dynamic policies
created by the system |
| any-qos-policy-name |
string |
The identification of any qos policy, including dynamic policies
created by the system |
| authentication-origin |
enumeration |
The authentication-origin data type is an enumerated
integer that describes the possible authentication source / origin. |
| authentication-origin |
enumeration |
The authentication-origin data type is an enumerated
integer that describes the possible authentication source / origin. |
| authentication-origin |
enumeration |
The authentication-origin data type is an enumerated
integer that describes the possible authentication source / origin. |
| authentication-origin |
enumeration |
The authentication-origin data type is an enumerated
integer that describes the possible authentication source / origin. |
| authentication-origin |
enumeration |
The authentication-origin data type is an enumerated
integer that describes the possible authentication source / origin. |
| bgp-peering-state |
enumeration |
The state of the BGP peering session. |
| bgp-peering-state |
enumeration |
The state of the BGP peering session. |
| bgp-peering-state |
enumeration |
The state of the BGP peering session. |
| bgp-peering-state |
enumeration |
The state of the BGP peering session. |
| bgp-peering-state |
enumeration |
The state of the BGP peering session. |
| bonding-connection-index |
uint32 |
The bonding connection index. |
| bonding-connection-index |
uint32 |
The bonding connection index. |
| bonding-connection-index |
uint32 |
The bonding connection index. |
| bonding-connection-index |
uint32 |
The bonding connection index. |
| bonding-connection-index |
uint32 |
The bonding connection index. |
| bonding-context-id |
string |
The bonding context identifier. |
| bonding-context-id |
string |
The bonding context identifier. |
| bonding-context-id |
string |
The bonding context identifier. |
| bonding-context-id |
string |
The bonding context identifier. |
| bonding-context-id |
string |
The bonding context identifier. |
| data-link |
union |
The data link on the DSL access loop |
| data-link |
union |
The data link on the DSL access loop |
| data-link |
union |
The data link on the DSL access loop |
| data-link |
union |
The data link on the DSL access loop |
| data-link |
union |
The data link on the DSL access loop |
| dhcp6-prefix-lifetime |
union |
|
| dhcp6-prefix-lifetime |
union |
|
| dhcp6-prefix-lifetime |
union |
|
| dhcp6-prefix-lifetime |
union |
|
| dhcp6-prefix-lifetime |
union |
|
| dhcp6-prefix-lifetime-new |
uint32 |
|
| dhcp6-prefix-lifetime-new |
uint32 |
|
| dhcp6-prefix-lifetime-new |
uint32 |
|
| dhcp6-prefix-lifetime-new |
uint32 |
|
| dhcp6-prefix-lifetime-new |
uint32 |
|
| dhcp6-rebind-timer |
uint32 |
The DHCP6 rebind timer (T2). |
| dhcp6-rebind-timer |
uint32 |
The DHCP6 rebind timer (T2). |
| dhcp6-rebind-timer |
uint32 |
The DHCP6 rebind timer (T2). |
| dhcp6-rebind-timer |
uint32 |
The DHCP6 rebind timer (T2). |
| dhcp6-rebind-timer |
uint32 |
The DHCP6 rebind timer (T2). |
| dhcp6-renew-timer |
uint32 |
The DHCP6 renew timer (T1). |
| dhcp6-renew-timer |
uint32 |
The DHCP6 renew timer (T1). |
| dhcp6-renew-timer |
uint32 |
The DHCP6 renew timer (T1). |
| dhcp6-renew-timer |
uint32 |
The DHCP6 renew timer (T1). |
| dhcp6-renew-timer |
uint32 |
The DHCP6 renew timer (T1). |
| dhcp-address-origin |
enumeration |
The address origin. |
| dhcp-address-origin |
enumeration |
The address origin. |
| dhcp-address-origin |
enumeration |
The address origin. |
| dhcp-address-origin |
enumeration |
The address origin. |
| dhcp-address-origin |
enumeration |
The address origin. |
| gtp-chg-chars |
enumeration |
specifies Charging Characteristics bits
The meaning of the bits is opaque to this system. |
| gtp-chg-chars |
enumeration |
specifies Charging Characteristics bits
The meaning of the bits is opaque to this system. |
| gtp-chg-chars |
enumeration |
specifies Charging Characteristics bits
The meaning of the bits is opaque to this system. |
| gtp-chg-chars |
enumeration |
specifies Charging Characteristics bits
The meaning of the bits is opaque to this system. |
| gtp-chg-chars |
enumeration |
specifies Charging Characteristics bits
The meaning of the bits is opaque to this system. |
| host-connectivity-verify-action |
enumeration |
The host-connectivity-verify-action data type is an enumerated
integer that describes the values used to identify the action taken
when Subscriber Host Connectivity Verification (SHCV) failed. |
| host-connectivity-verify-action |
enumeration |
The host-connectivity-verify-action data type is an enumerated
integer that describes the values used to identify the action taken
when Subscriber Host Connectivity Verification (SHCV) failed. |
| host-connectivity-verify-action |
enumeration |
The host-connectivity-verify-action data type is an enumerated
integer that describes the values used to identify the action taken
when Subscriber Host Connectivity Verification (SHCV) failed. |
| host-connectivity-verify-action |
enumeration |
The host-connectivity-verify-action data type is an enumerated
integer that describes the values used to identify the action taken
when Subscriber Host Connectivity Verification (SHCV) failed. |
| host-connectivity-verify-action |
enumeration |
The host-connectivity-verify-action data type is an enumerated
integer that describes the values used to identify the action taken
when Subscriber Host Connectivity Verification (SHCV) failed. |
| host-connectivity-verify-interval |
uint32 |
The host-connectivity-verify-interval data type is a number that
specifies the interval between connectivity checks. |
| host-connectivity-verify-interval |
uint32 |
The host-connectivity-verify-interval data type is a number that
specifies the interval between connectivity checks. |
| host-connectivity-verify-interval |
uint32 |
The host-connectivity-verify-interval data type is a number that
specifies the interval between connectivity checks. |
| host-connectivity-verify-interval |
uint32 |
The host-connectivity-verify-interval data type is a number that
specifies the interval between connectivity checks. |
| host-connectivity-verify-interval |
uint32 |
The host-connectivity-verify-interval data type is a number that
specifies the interval between connectivity checks. |
| host-connectivity-verify-retry-count |
uint32 |
The host-connectivity-verify-retry-count data type is a number
that specifies the number of connectivity check retransmissions.
Setting the value to n specifies that, for any given host,
at most (n+1) probes are done each interval,
and (n+1) missed replies are considered as a connectivity
failure. |
| host-connectivity-verify-retry-count |
uint32 |
The host-connectivity-verify-retry-count data type is a number
that specifies the number of connectivity check retransmissions.
Setting the value to n specifies that, for any given host,
at most (n+1) probes are done each interval,
and (n+1) missed replies are considered as a connectivity
failure. |
| host-connectivity-verify-retry-count |
uint32 |
The host-connectivity-verify-retry-count data type is a number
that specifies the number of connectivity check retransmissions.
Setting the value to n specifies that, for any given host,
at most (n+1) probes are done each interval,
and (n+1) missed replies are considered as a connectivity
failure. |
| host-connectivity-verify-retry-count |
uint32 |
The host-connectivity-verify-retry-count data type is a number
that specifies the number of connectivity check retransmissions.
Setting the value to n specifies that, for any given host,
at most (n+1) probes are done each interval,
and (n+1) missed replies are considered as a connectivity
failure. |
| host-connectivity-verify-retry-count |
uint32 |
The host-connectivity-verify-retry-count data type is a number
that specifies the number of connectivity check retransmissions.
Setting the value to n specifies that, for any given host,
at most (n+1) probes are done each interval,
and (n+1) missed replies are considered as a connectivity
failure. |
| host-connectivity-verify-retry-timeout |
uint32 |
The host-connectivity-verify-retry-timeout data type is a number
that specifies the timeout before a connectivity check
retransmission. |
| host-connectivity-verify-retry-timeout |
uint32 |
The host-connectivity-verify-retry-timeout data type is a number
that specifies the timeout before a connectivity check
retransmission. |
| host-connectivity-verify-retry-timeout |
uint32 |
The host-connectivity-verify-retry-timeout data type is a number
that specifies the timeout before a connectivity check
retransmission. |
| host-connectivity-verify-retry-timeout |
uint32 |
The host-connectivity-verify-retry-timeout data type is a number
that specifies the timeout before a connectivity check
retransmission. |
| host-connectivity-verify-retry-timeout |
uint32 |
The host-connectivity-verify-retry-timeout data type is a number
that specifies the timeout before a connectivity check
retransmission. |
| host-connectivity-verify-source-ip-origin |
enumeration |
The host-connectivity-verify-source-ip-origin data type is an
enumerated integer that describes the values used to identify the
origin of the source IP address used for connectivity verification
in a layer-3 service (IES or VPRN).
The value 'interface' means that the IP address of the interface
is used.
The value 'vrrp' means that the primary IP address of the
Virtual Router Redundancy Protocol (VRRP) is used. |
| host-connectivity-verify-source-ip-origin |
enumeration |
The host-connectivity-verify-source-ip-origin data type is an
enumerated integer that describes the values used to identify the
origin of the source IP address used for connectivity verification
in a layer-3 service (IES or VPRN).
The value 'interface' means that the IP address of the interface
is used.
The value 'vrrp' means that the primary IP address of the
Virtual Router Redundancy Protocol (VRRP) is used. |
| host-connectivity-verify-source-ip-origin |
enumeration |
The host-connectivity-verify-source-ip-origin data type is an
enumerated integer that describes the values used to identify the
origin of the source IP address used for connectivity verification
in a layer-3 service (IES or VPRN).
The value 'interface' means that the IP address of the interface
is used.
The value 'vrrp' means that the primary IP address of the
Virtual Router Redundancy Protocol (VRRP) is used. |
| host-connectivity-verify-source-ip-origin |
enumeration |
The host-connectivity-verify-source-ip-origin data type is an
enumerated integer that describes the values used to identify the
origin of the source IP address used for connectivity verification
in a layer-3 service (IES or VPRN).
The value 'interface' means that the IP address of the interface
is used.
The value 'vrrp' means that the primary IP address of the
Virtual Router Redundancy Protocol (VRRP) is used. |
| host-connectivity-verify-source-ip-origin |
enumeration |
The host-connectivity-verify-source-ip-origin data type is an
enumerated integer that describes the values used to identify the
origin of the source IP address used for connectivity verification
in a layer-3 service (IES or VPRN).
The value 'interface' means that the IP address of the interface
is used.
The value 'vrrp' means that the primary IP address of the
Virtual Router Redundancy Protocol (VRRP) is used. |
| host-id |
enumeration |
ID of a host within a session |
| host-id |
enumeration |
ID of a host within a session |
| host-id |
enumeration |
ID of a host within a session |
| host-id |
enumeration |
ID of a host within a session |
| host-id |
enumeration |
ID of a host within a session |
| iaid-type |
enumeration |
The type of the addresses that are associated with the Identity Association ID (IAID) |
| iaid-type |
enumeration |
The type of the addresses that are associated with the Identity Association ID (IAID) |
| iaid-type |
enumeration |
The type of the addresses that are associated with the Identity Association ID (IAID) |
| iaid-type |
enumeration |
The type of the addresses that are associated with the Identity Association ID (IAID) |
| iaid-type |
enumeration |
The type of the addresses that are associated with the Identity Association ID (IAID) |
| int-dest-id |
string |
The string identifying an intermediate destination
(for example a DSLAM). |
| int-dest-id |
string |
The string identifying an intermediate destination
(for example a DSLAM). |
| int-dest-id |
string |
The string identifying an intermediate destination
(for example a DSLAM). |
| int-dest-id |
string |
The string identifying an intermediate destination
(for example a DSLAM). |
| int-dest-id |
string |
The string identifying an intermediate destination
(for example a DSLAM). |
| ipoe-session-min-auth-interval |
union |
Configure the minimum interval between two
authentication attempts |
| ipoe-session-min-auth-interval |
union |
Configure the minimum interval between two
authentication attempts |
| ipoe-session-min-auth-interval |
union |
Configure the minimum interval between two
authentication attempts |
| ipoe-session-min-auth-interval |
union |
Configure the minimum interval between two
authentication attempts |
| ipoe-session-min-auth-interval |
union |
Configure the minimum interval between two
authentication attempts |
| ipoe-session-radius-session-timeout |
enumeration |
how to interpret the session timeout VSA |
| ipoe-session-radius-session-timeout |
enumeration |
how to interpret the session timeout VSA |
| ipoe-session-radius-session-timeout |
enumeration |
how to interpret the session timeout VSA |
| ipoe-session-radius-session-timeout |
enumeration |
how to interpret the session timeout VSA |
| ipoe-session-radius-session-timeout |
enumeration |
how to interpret the session timeout VSA |
| ludb-ipoe-match-type |
enumeration |
The IPOE host match type. |
| ludb-ipoe-match-type |
enumeration |
The IPOE host match type. |
| ludb-ipoe-match-type |
enumeration |
The IPOE host match type. |
| ludb-ipoe-match-type |
enumeration |
The IPOE host match type. |
| ludb-ipoe-match-type |
enumeration |
The IPOE host match type. |
| ludb-ppp-match-type |
enumeration |
The PPP host match criteria. |
| ludb-ppp-match-type |
enumeration |
The PPP host match criteria. |
| ludb-ppp-match-type |
enumeration |
The PPP host match criteria. |
| ludb-ppp-match-type |
enumeration |
The PPP host match criteria. |
| ludb-ppp-match-type |
enumeration |
The PPP host match criteria. |
| mac-specification |
string |
This type is a string of ASCII characters that specifies how to
format a string that represents a MAC address.
The format is as follows:
<mac-specification> ::= <alpha-string> [<delimiter-char>]
<alpha-string> ::= <ucase-alpha>+ | <lcase-alpha>+
<ucase-alpha> ::= 'A' | 'B' | 'B' ... | 'Z'
<lcase-alpha> ::= 'a' | 'b' | 'c' ... | 'z'
<delimiter-char> any ASCII character that is not an <alpha-char>
or a decimal digit
Only the number of alphabetic characters and the case is relevant.
Examples:
'ab:' 00:0c:f1:99:85:b8 Nokia SROS style
'XY-' 00-0C-F1-99-85-B8 IEEE canonical style
'mmmm.' 0002.03aa.abff Cisco style.
'xx' 000cf19985b8 |
| mac-specification |
string |
This type is a string of ASCII characters that specifies how to
format a string that represents a MAC address.
The format is as follows:
<mac-specification> ::= <alpha-string> [<delimiter-char>]
<alpha-string> ::= <ucase-alpha>+ | <lcase-alpha>+
<ucase-alpha> ::= 'A' | 'B' | 'B' ... | 'Z'
<lcase-alpha> ::= 'a' | 'b' | 'c' ... | 'z'
<delimiter-char> any ASCII character that is not an <alpha-char>
or a decimal digit
Only the number of alphabetic characters and the case is relevant.
Examples:
'ab:' 00:0c:f1:99:85:b8 Nokia SROS style
'XY-' 00-0C-F1-99-85-B8 IEEE canonical style
'mmmm.' 0002.03aa.abff Cisco style.
'xx' 000cf19985b8 |
| mac-specification |
string |
This type is a string of ASCII characters that specifies how to
format a string that represents a MAC address.
The format is as follows:
<mac-specification> ::= <alpha-string> [<delimiter-char>]
<alpha-string> ::= <ucase-alpha>+ | <lcase-alpha>+
<ucase-alpha> ::= 'A' | 'B' | 'B' ... | 'Z'
<lcase-alpha> ::= 'a' | 'b' | 'c' ... | 'z'
<delimiter-char> any ASCII character that is not an <alpha-char>
or a decimal digit
Only the number of alphabetic characters and the case is relevant.
Examples:
'ab:' 00:0c:f1:99:85:b8 Nokia SROS style
'XY-' 00-0C-F1-99-85-B8 IEEE canonical style
'mmmm.' 0002.03aa.abff Cisco style.
'xx' 000cf19985b8 |
| mac-specification |
string |
This type is a string of ASCII characters that specifies how to
format a string that represents a MAC address.
The format is as follows:
<mac-specification> ::= <alpha-string> [<delimiter-char>]
<alpha-string> ::= <ucase-alpha>+ | <lcase-alpha>+
<ucase-alpha> ::= 'A' | 'B' | 'B' ... | 'Z'
<lcase-alpha> ::= 'a' | 'b' | 'c' ... | 'z'
<delimiter-char> any ASCII character that is not an <alpha-char>
or a decimal digit
Only the number of alphabetic characters and the case is relevant.
Examples:
'ab:' 00:0c:f1:99:85:b8 Nokia SROS style
'XY-' 00-0C-F1-99-85-B8 IEEE canonical style
'mmmm.' 0002.03aa.abff Cisco style.
'xx' 000cf19985b8 |
| mac-specification |
string |
This type is a string of ASCII characters that specifies how to
format a string that represents a MAC address.
The format is as follows:
<mac-specification> ::= <alpha-string> [<delimiter-char>]
<alpha-string> ::= <ucase-alpha>+ | <lcase-alpha>+
<ucase-alpha> ::= 'A' | 'B' | 'B' ... | 'Z'
<lcase-alpha> ::= 'a' | 'b' | 'c' ... | 'z'
<delimiter-char> any ASCII character that is not an <alpha-char>
or a decimal digit
Only the number of alphabetic characters and the case is relevant.
Examples:
'ab:' 00:0c:f1:99:85:b8 Nokia SROS style
'XY-' 00-0C-F1-99-85-B8 IEEE canonical style
'mmmm.' 0002.03aa.abff Cisco style.
'xx' 000cf19985b8 |
| managed-route-state |
enumeration |
The state of the managed route |
| managed-route-state |
enumeration |
The state of the managed route |
| managed-route-state |
enumeration |
The state of the managed route |
| managed-route-state |
enumeration |
The state of the managed route |
| managed-route-state |
enumeration |
The state of the managed route |
| match-icmp-type |
uint32 |
IPv6 or IPv6 icmp type |
| match-icmp-type |
uint32 |
IPv6 or IPv6 icmp type |
| match-icmp-type |
uint32 |
IPv6 or IPv6 icmp type |
| match-icmp-type |
uint32 |
IPv6 or IPv6 icmp type |
| match-icmp-type |
uint32 |
IPv6 or IPv6 icmp type |
| match-protocol-next-header |
union |
IPv4 protocol or IPv6 next-header |
| match-protocol-next-header |
union |
IPv4 protocol or IPv6 next-header |
| match-protocol-next-header |
union |
IPv4 protocol or IPv6 next-header |
| match-protocol-next-header |
union |
IPv4 protocol or IPv6 next-header |
| match-protocol-next-header |
union |
IPv4 protocol or IPv6 next-header |
| multicast-bonding-connection |
union |
The multicast bonding connection. |
| multicast-bonding-connection |
union |
The multicast bonding connection. |
| multicast-bonding-connection |
union |
The multicast bonding connection. |
| multicast-bonding-connection |
union |
The multicast bonding connection. |
| multicast-bonding-connection |
union |
The multicast bonding connection. |
| overrule-filter-name |
union |
Filter to over-rule the filter specified in the sla-profile |
| overrule-filter-name |
union |
Filter to over-rule the filter specified in the sla-profile |
| overrule-filter-name |
union |
Filter to over-rule the filter specified in the sla-profile |
| overrule-filter-name |
union |
Filter to over-rule the filter specified in the sla-profile |
| overrule-filter-name |
union |
Filter to over-rule the filter specified in the sla-profile |
| overrule-qos-policy-name |
string |
Qos policy to over-rule the policy specified in the sla-profile |
| overrule-qos-policy-name |
string |
Qos policy to over-rule the policy specified in the sla-profile |
| overrule-qos-policy-name |
string |
Qos policy to over-rule the policy specified in the sla-profile |
| overrule-qos-policy-name |
string |
Qos policy to over-rule the policy specified in the sla-profile |
| overrule-qos-policy-name |
string |
Qos policy to over-rule the policy specified in the sla-profile |
| pfcp-pdr-id |
string |
PFCP Packet Data Rule Identifier |
| pfcp-pdr-id |
string |
PFCP Packet Data Rule Identifier |
| pfcp-pdr-id |
string |
PFCP Packet Data Rule Identifier |
| pfcp-pdr-id |
string |
PFCP Packet Data Rule Identifier |
| pfcp-pdr-id |
string |
PFCP Packet Data Rule Identifier |
| pfcp-session-id |
string |
PFCP Session Identifier |
| pfcp-session-id |
string |
PFCP Session Identifier |
| pfcp-session-id |
string |
PFCP Session Identifier |
| pfcp-session-id |
string |
PFCP Session Identifier |
| pfcp-session-id |
string |
PFCP Session Identifier |
| pfcp-te-id |
string |
PFCP Traffic Endpoint Identifier |
| pfcp-te-id |
string |
PFCP Traffic Endpoint Identifier |
| pfcp-te-id |
string |
PFCP Traffic Endpoint Identifier |
| pfcp-te-id |
string |
PFCP Traffic Endpoint Identifier |
| pfcp-te-id |
string |
PFCP Traffic Endpoint Identifier |
| pppoe-anti-spoof |
enumeration |
The type of anti-spoof filtering for PPPoE |
| pppoe-anti-spoof |
enumeration |
The type of anti-spoof filtering for PPPoE |
| pppoe-anti-spoof |
enumeration |
The type of anti-spoof filtering for PPPoE |
| pppoe-anti-spoof |
enumeration |
The type of anti-spoof filtering for PPPoE |
| pppoe-anti-spoof |
enumeration |
The type of anti-spoof filtering for PPPoE |
| pppoe-session-id |
uint32 |
PPPoE session identifier |
| pppoe-session-id |
uint32 |
PPPoE session identifier |
| pppoe-session-id |
uint32 |
PPPoE session identifier |
| pppoe-session-id |
uint32 |
PPPoE session identifier |
| pppoe-session-id |
uint32 |
PPPoE session identifier |
| ppp-user-name |
string |
The PPP user name |
| ppp-user-name |
string |
The PPP user name |
| ppp-user-name |
string |
The PPP user name |
| ppp-user-name |
string |
The PPP user name |
| ppp-user-name |
string |
The PPP user name |
| queue-or-policer |
enumeration |
This type indicates whether the data applies to a queue or a
policer. |
| queue-or-policer |
enumeration |
This type indicates whether the data applies to a queue or a
policer. |
| queue-or-policer |
enumeration |
This type indicates whether the data applies to a queue or a
policer. |
| queue-or-policer |
enumeration |
This type indicates whether the data applies to a queue or a
policer. |
| queue-or-policer |
enumeration |
This type indicates whether the data applies to a queue or a
policer. |
| queue-or-policer-id |
uint32 |
This type indicates the queue or policer-id. |
| queue-or-policer-id |
uint32 |
This type indicates the queue or policer-id. |
| queue-or-policer-id |
uint32 |
This type indicates the queue or policer-id. |
| queue-or-policer-id |
uint32 |
This type indicates the queue or policer-id. |
| queue-or-policer-id |
uint32 |
This type indicates the queue or policer-id. |
| rip-listener-state |
enumeration |
The state of the RIP listener |
| rip-listener-state |
enumeration |
The state of the RIP listener |
| rip-listener-state |
enumeration |
The state of the RIP listener |
| rip-listener-state |
enumeration |
The state of the RIP listener |
| rip-listener-state |
enumeration |
The state of the RIP listener |
| router-advertisement-prefix-options-lifetime |
union |
|
| router-advertisement-prefix-options-lifetime |
union |
|
| router-advertisement-prefix-options-lifetime |
union |
|
| router-advertisement-prefix-options-lifetime |
union |
|
| router-advertisement-prefix-options-lifetime |
union |
|
| routing-origin |
enumeration |
The origin of the address of a subscriber host |
| routing-origin |
enumeration |
The origin of the address of a subscriber host |
| routing-origin |
enumeration |
The origin of the address of a subscriber host |
| routing-origin |
enumeration |
The origin of the address of a subscriber host |
| routing-origin |
enumeration |
The origin of the address of a subscriber host |
| sap-host-limit |
uint32 |
The sap-host-limit type specifies the maximum number
of subscriber hosts allowed on a SAP. |
| sap-host-limit |
uint32 |
The sap-host-limit type specifies the maximum number
of subscriber hosts allowed on a SAP. |
| sap-host-limit |
uint32 |
The sap-host-limit type specifies the maximum number
of subscriber hosts allowed on a SAP. |
| sap-host-limit |
uint32 |
The sap-host-limit type specifies the maximum number
of subscriber hosts allowed on a SAP. |
| sap-host-limit |
uint32 |
The sap-host-limit type specifies the maximum number
of subscriber hosts allowed on a SAP. |
| sap-lease-state-limit |
uint32 |
The sap-lease-state-limit type specifies the maximum number
of ipv4 leases allowed on a SAP. |
| sap-lease-state-limit |
uint32 |
The sap-lease-state-limit type specifies the maximum number
of ipv4 leases allowed on a SAP. |
| sap-lease-state-limit |
uint32 |
The sap-lease-state-limit type specifies the maximum number
of ipv4 leases allowed on a SAP. |
| sap-lease-state-limit |
uint32 |
The sap-lease-state-limit type specifies the maximum number
of ipv4 leases allowed on a SAP. |
| sap-lease-state-limit |
uint32 |
The sap-lease-state-limit type specifies the maximum number
of ipv4 leases allowed on a SAP. |
| sap-subscriber-limit |
union |
The sap-subscriber-limit type specifies the maximum number
of subscribers allowed on a SAP. |
| sap-subscriber-limit |
union |
The sap-subscriber-limit type specifies the maximum number
of subscribers allowed on a SAP. |
| sap-subscriber-limit |
union |
The sap-subscriber-limit type specifies the maximum number
of subscribers allowed on a SAP. |
| sap-subscriber-limit |
union |
The sap-subscriber-limit type specifies the maximum number
of subscribers allowed on a SAP. |
| sap-subscriber-limit |
union |
The sap-subscriber-limit type specifies the maximum number
of subscribers allowed on a SAP. |
| session-address-origin |
enumeration |
The address origin. |
| session-address-origin |
enumeration |
The address origin. |
| session-address-origin |
enumeration |
The address origin. |
| session-address-origin |
enumeration |
The address origin. |
| session-address-origin |
enumeration |
The address origin. |
| session-anti-spoof |
union |
The type of anti-spoof filtering for a subscriber session |
| session-anti-spoof |
union |
The type of anti-spoof filtering for a subscriber session |
| session-anti-spoof |
union |
The type of anti-spoof filtering for a subscriber session |
| session-anti-spoof |
union |
The type of anti-spoof filtering for a subscriber session |
| session-anti-spoof |
union |
The type of anti-spoof filtering for a subscriber session |
| session-id |
uint64 |
Session identifier |
| session-id |
uint64 |
Session identifier |
| session-id |
uint64 |
Session identifier |
| session-id |
uint64 |
Session identifier |
| session-id |
uint64 |
Session identifier |
| session-type |
enumeration |
Session type |
| session-type |
enumeration |
Session type |
| session-type |
enumeration |
Session type |
| session-type |
enumeration |
Session type |
| session-type |
enumeration |
Session type |
| shcv-oper-state |
enumeration |
The operational state of the subscriber host connectivity check. |
| shcv-oper-state |
enumeration |
The operational state of the subscriber host connectivity check. |
| shcv-oper-state |
enumeration |
The operational state of the subscriber host connectivity check. |
| shcv-oper-state |
enumeration |
The operational state of the subscriber host connectivity check. |
| shcv-oper-state |
enumeration |
The operational state of the subscriber host connectivity check. |
| sla-profile-host-limit |
int32 |
This type indicates the maximum number of hosts using a given SLA
profile.
0 is not allowed. |
| sla-profile-host-limit |
int32 |
This type indicates the maximum number of hosts using a given SLA
profile.
0 is not allowed. |
| sla-profile-host-limit |
int32 |
This type indicates the maximum number of hosts using a given SLA
profile.
0 is not allowed. |
| sla-profile-host-limit |
int32 |
This type indicates the maximum number of hosts using a given SLA
profile.
0 is not allowed. |
| sla-profile-host-limit |
int32 |
This type indicates the maximum number of hosts using a given SLA
profile.
0 is not allowed. |
| sla-profile-host-limit-with-zero |
int32 |
This type indicates the maximum number of hosts using a given SLA
profile.
0 is allowed. |
| sla-profile-host-limit-with-zero |
int32 |
This type indicates the maximum number of hosts using a given SLA
profile.
0 is allowed. |
| sla-profile-host-limit-with-zero |
int32 |
This type indicates the maximum number of hosts using a given SLA
profile.
0 is allowed. |
| sla-profile-host-limit-with-zero |
int32 |
This type indicates the maximum number of hosts using a given SLA
profile.
0 is allowed. |
| sla-profile-host-limit-with-zero |
int32 |
This type indicates the maximum number of hosts using a given SLA
profile.
0 is allowed. |
| sla-profile-instance-id |
uint32 |
Identifies a sla profile instance |
| sla-profile-instance-id |
uint32 |
Identifies a sla profile instance |
| sla-profile-instance-id |
uint32 |
Identifies a sla profile instance |
| sla-profile-instance-id |
uint32 |
Identifies a sla profile instance |
| sla-profile-instance-id |
uint32 |
Identifies a sla profile instance |
| sla-profile-instance-sharing-type |
enumeration |
Indicates the way subscriber hosts of a given subscriber and SAP
are grouped together to share an SLA profile instance |
| sla-profile-instance-sharing-type |
enumeration |
Indicates the way subscriber hosts of a given subscriber and SAP
are grouped together to share an SLA profile instance |
| sla-profile-instance-sharing-type |
enumeration |
Indicates the way subscriber hosts of a given subscriber and SAP
are grouped together to share an SLA profile instance |
| sla-profile-instance-sharing-type |
enumeration |
Indicates the way subscriber hosts of a given subscriber and SAP
are grouped together to share an SLA profile instance |
| sla-profile-instance-sharing-type |
enumeration |
Indicates the way subscriber hosts of a given subscriber and SAP
are grouped together to share an SLA profile instance |
| sub-id-key-ipoe |
enumeration |
Possible keys for auto-generated sub-id keys for IPoE hosts |
| sub-id-key-ipoe |
enumeration |
Possible keys for auto-generated sub-id keys for IPoE hosts |
| sub-id-key-ipoe |
enumeration |
Possible keys for auto-generated sub-id keys for IPoE hosts |
| sub-id-key-ipoe |
enumeration |
Possible keys for auto-generated sub-id keys for IPoE hosts |
| sub-id-key-ipoe |
enumeration |
Possible keys for auto-generated sub-id keys for IPoE hosts |
| sub-id-key-ppp |
enumeration |
Possible keys for auto-generated sub-id keys for PPP hosts |
| sub-id-key-ppp |
enumeration |
Possible keys for auto-generated sub-id keys for PPP hosts |
| sub-id-key-ppp |
enumeration |
Possible keys for auto-generated sub-id keys for PPP hosts |
| sub-id-key-ppp |
enumeration |
Possible keys for auto-generated sub-id keys for PPP hosts |
| sub-id-key-ppp |
enumeration |
Possible keys for auto-generated sub-id keys for PPP hosts |
| submgt-statistics-ipv4-type |
enumeration |
Submgt statistics about IPv4 hosts |
| submgt-statistics-ipv4-type |
enumeration |
Submgt statistics about IPv4 hosts |
| submgt-statistics-ipv4-type |
enumeration |
Submgt statistics about IPv4 hosts |
| submgt-statistics-ipv4-type |
enumeration |
Submgt statistics about IPv4 hosts |
| submgt-statistics-ipv4-type |
enumeration |
Submgt statistics about IPv4 hosts |
| submgt-statistics-ipv6-type |
enumeration |
Submgt statistics about IPv6 hosts and managed routes |
| submgt-statistics-ipv6-type |
enumeration |
Submgt statistics about IPv6 hosts and managed routes |
| submgt-statistics-ipv6-type |
enumeration |
Submgt statistics about IPv6 hosts and managed routes |
| submgt-statistics-ipv6-type |
enumeration |
Submgt statistics about IPv6 hosts and managed routes |
| submgt-statistics-ipv6-type |
enumeration |
Submgt statistics about IPv6 hosts and managed routes |
| submgt-statistics-l2tp-type |
enumeration |
Submgt statistics about L2TP tunnels |
| submgt-statistics-l2tp-type |
enumeration |
Submgt statistics about L2TP tunnels |
| submgt-statistics-l2tp-type |
enumeration |
Submgt statistics about L2TP tunnels |
| submgt-statistics-l2tp-type |
enumeration |
Submgt statistics about L2TP tunnels |
| submgt-statistics-l2tp-type |
enumeration |
Submgt statistics about L2TP tunnels |
| submgt-statistics-session-type |
enumeration |
Submgt statistics about PPP sessions, IPOE sessions and Subscribers |
| submgt-statistics-session-type |
enumeration |
Submgt statistics about PPP sessions, IPOE sessions and Subscribers |
| submgt-statistics-session-type |
enumeration |
Submgt statistics about PPP sessions, IPOE sessions and Subscribers |
| submgt-statistics-session-type |
enumeration |
Submgt statistics about PPP sessions, IPOE sessions and Subscribers |
| submgt-statistics-session-type |
enumeration |
Submgt statistics about PPP sessions, IPOE sessions and Subscribers |
| submgt-statistics-total-type |
enumeration |
Submgt statistics about total hosts and leases (V4, V6 and other) |
| submgt-statistics-total-type |
enumeration |
Submgt statistics about total hosts and leases (V4, V6 and other) |
| submgt-statistics-total-type |
enumeration |
Submgt statistics about total hosts and leases (V4, V6 and other) |
| submgt-statistics-total-type |
enumeration |
Submgt statistics about total hosts and leases (V4, V6 and other) |
| submgt-statistics-total-type |
enumeration |
Submgt statistics about total hosts and leases (V4, V6 and other) |
| subscriber-egress-policer-stat-mode-2-type |
enumeration |
the mode of statistics collected by this egress policer. |
| subscriber-egress-policer-stat-mode-2-type |
enumeration |
the mode of statistics collected by this egress policer. |
| subscriber-egress-policer-stat-mode-2-type |
enumeration |
the mode of statistics collected by this egress policer. |
| subscriber-egress-policer-stat-mode-2-type |
enumeration |
the mode of statistics collected by this egress policer. |
| subscriber-egress-policer-stat-mode-2-type |
enumeration |
the mode of statistics collected by this egress policer. |
| subscriber-egress-policer-stat-mode-type |
enumeration |
the mode of statistics collected by this egress policer. |
| subscriber-egress-policer-stat-mode-type |
enumeration |
the mode of statistics collected by this egress policer. |
| subscriber-egress-policer-stat-mode-type |
enumeration |
the mode of statistics collected by this egress policer. |
| subscriber-egress-policer-stat-mode-type |
enumeration |
the mode of statistics collected by this egress policer. |
| subscriber-egress-policer-stat-mode-type |
enumeration |
the mode of statistics collected by this egress policer. |
| subscriber-host-one-time-http-redirect-filter-source |
enumeration |
The source of the one-time HTTP redirection for a subscriber host |
| subscriber-host-one-time-http-redirect-filter-source |
enumeration |
The source of the one-time HTTP redirection for a subscriber host |
| subscriber-host-one-time-http-redirect-filter-source |
enumeration |
The source of the one-time HTTP redirection for a subscriber host |
| subscriber-host-one-time-http-redirect-filter-source |
enumeration |
The source of the one-time HTTP redirection for a subscriber host |
| subscriber-host-one-time-http-redirect-filter-source |
enumeration |
The source of the one-time HTTP redirection for a subscriber host |
| subscriber-host-one-time-http-redirect-state |
enumeration |
The state of the one-time HTTP redirection for a subscriber host |
| subscriber-host-one-time-http-redirect-state |
enumeration |
The state of the one-time HTTP redirection for a subscriber host |
| subscriber-host-one-time-http-redirect-state |
enumeration |
The state of the one-time HTTP redirection for a subscriber host |
| subscriber-host-one-time-http-redirect-state |
enumeration |
The state of the one-time HTTP redirection for a subscriber host |
| subscriber-host-one-time-http-redirect-state |
enumeration |
The state of the one-time HTTP redirection for a subscriber host |
| subscriber-host-origin |
enumeration |
The origin of the subscriber host. |
| subscriber-host-origin |
enumeration |
The origin of the subscriber host. |
| subscriber-host-origin |
enumeration |
The origin of the subscriber host. |
| subscriber-host-origin |
enumeration |
The origin of the subscriber host. |
| subscriber-host-origin |
enumeration |
The origin of the subscriber host. |
| subscriber-id |
string |
The string identifying a subscriber. |
| subscriber-id |
string |
The string identifying a subscriber. |
| subscriber-id |
string |
The string identifying a subscriber. |
| subscriber-id |
string |
The string identifying a subscriber. |
| subscriber-id |
string |
The string identifying a subscriber. |
| subscriber-ingress-policer-stat-mode-type |
enumeration |
the mode of statistics collected by this ingress policer. |
| subscriber-ingress-policer-stat-mode-type |
enumeration |
the mode of statistics collected by this ingress policer. |
| subscriber-ingress-policer-stat-mode-type |
enumeration |
the mode of statistics collected by this ingress policer. |
| subscriber-ingress-policer-stat-mode-type |
enumeration |
the mode of statistics collected by this ingress policer. |
| subscriber-ingress-policer-stat-mode-type |
enumeration |
the mode of statistics collected by this ingress policer. |
| user-name-format-domain-operation |
enumeration |
|
| user-name-format-domain-operation |
enumeration |
|
| user-name-format-domain-operation |
enumeration |
|
| user-name-format-domain-operation |
enumeration |
|
| user-name-format-domain-operation |
enumeration |
|