A logical entity that is actively participating in the ISA/ESA group.
For active/active resiliency models this maps to a logical partition of an physical ISA/ESA
For all other resiliency models this maps directly to a non-standby physical ISA/ESA.
classifier-default-action
enumeration
Action to take
deterministic-script-save-result
enumeration
Result of the last save action
filtering
enumeration
The NAT filtering.
ip-fragmentation
enumeration
ip-protocol-tcp-or-udp
enumeration
IP protocol number
ipv6-subscriber-prefix-length
uint8
lsn-max-subscriber-limit
uint32
Determines the length of the prefix on the inside that will
be used for load balancing purposes between the MS-ISAs. The
length of the prefix that will be used for load balancing
purposes is (32-n), where 2^n = lsn-max-subscriber-limit.
In deterministic NAT, is the largest value of all subscriber-limits
configured in each deterministic pool that is used from inside routing
context. In dNAT-only, this value can be set to any value from the specified
range independent of the subscriber-limits.
mac-format
enumeration
Specifies how to format a MAC address.
The value 'alu' specifies the Nokia SROS style, xx:xx:xx:xx:xx:xx.
The value 'ieee' specifies IEEE canonical style, xx-xx-xx-xx-xx-xx.
nat-subscriber-identification-attr-type
enumeration
nat-subscriber-identification-attr-vendor-id
enumeration
pool-mode
enumeration
pool-type
enumeration
port-number
uint32
prefix-list-application
enumeration
Specifies how the NAT prefix list is to be applied.
The value 'l2-aware-dest-to-policy' specifies that the NAT prefix list will
be applied to match destination IP addresses and find a NAT policy for Layer-2-Aware NAT.
The value 'dnat-only-subscribers' specifies that the NAT prefix list will
be applied to match source IP addresses of subscribers subjected
to only Destination NAT (without Source Network Address and Port Translation);.
sub-type
enumeration
syslog-facility
enumeration
The 'Facility' number in the PRI part of the NAT syslog messages
syslog-severity-level
enumeration
The severity level in the PRI part of the syslog messages