This document defines a YANG data model that can be used to configure and manage Network Time Protocol (NTP) version 4. It can ...
Version: 2022-07-05
module ietf-ntp { yang-version 1.1; namespace "urn:ietf:params:xml:ns:yang:ietf-ntp"; prefix ntp; import ietf-yang-types { prefix yang; reference "RFC 6991: Common YANG Data Types"; } import ietf-inet-types { prefix inet; reference "RFC 6991: Common YANG Data Types"; } import ietf-interfaces { prefix if; reference "RFC 8343: A YANG Data Model for Interface Management"; } import ietf-system { prefix sys; reference "RFC 7317: A YANG Data Model for System Management"; } import ietf-access-control-list { prefix acl; reference "RFC 8519: YANG Data Model for Network Access Control Lists (ACLs)"; } import ietf-routing-types { prefix rt-types; reference "RFC 8294: Common YANG Data Types for the Routing Area"; } import ietf-netconf-acm { prefix nacm; reference "RFC 8341: Network Configuration Access Control Model"; } organization "IETF NTP (Network Time Protocol) Working Group"; contact "WG Web: <https://datatracker.ietf.org/wg/ntp/> WG List: <mailto: ntp@ietf.org Editor: Dhruv Dhody <mailto:dhruv.ietf@gmail.com> Editor: Ankit Kumar Sinha <mailto:ankit.ietf@gmail.com>"; description "This document defines a YANG data model that can be used to configure and manage Network Time Protocol (NTP) version 4. It can also be used to configure and manage version 3. The data model includes configuration data and state data. The key words 'MUST', 'MUST NOT', 'REQUIRED', 'SHALL', 'SHALL NOT', 'SHOULD', 'SHOULD NOT', 'RECOMMENDED', 'NOT RECOMMENDED', 'MAY', and 'OPTIONAL' in this document are to be interpreted as described in BCP 14 (RFC 2119) (RFC 8174) when, and only when, they appear in all capitals, as shown here. Copyright (c) 2022 IETF Trust and the persons identified as authors of the code. All rights reserved. Redistribution and use in source and binary forms, with or without modification, is permitted pursuant to, and subject to the license terms contained in, the Revised BSD License set forth in Section 4.c of the IETF Trust's Legal Provisions Relating to IETF Documents (https://trustee.ietf.org/license-info). This version of this YANG module is part of RFC 9249; see the RFC itself for full legal notices."; revision "2022-07-05" { description "Initial revision"; reference "RFC 9249: A YANG Data Model for NTP"; } typedef ntp-stratum { type uint8 { range "1..16"; } description "The level of each server in the hierarchy is defined by a stratum. Primary servers are assigned with stratum one; secondary servers at each lower level are assigned with one stratum greater than the preceding level."; reference "RFC 5905: Network Time Protocol Version 4: Protocol and Algorithms Specification, Section 3"; } typedef ntp-version { type uint8 { range "3..max"; } default "4"; description "The current NTP version supported by the corresponding association"; reference "RFC 5905: Network Time Protocol Version 4: Protocol and Algorithms Specification, Section 1"; } typedef refid { type union { type inet:ipv4-address; type uint32; type string { length "4"; } } description "A code identifying the particular server or reference clock. The interpretation depends upon stratum. It could be an IPv4 address, the first 32 bits of the MD5 hash of the IPv6 address, or a string for the Reference Identifier and kiss codes. Some examples: -- a refclock ID like '127.127.1.0' for local clock sync -- uni/multi/broadcast associations for IPv4 will look like '203.0.113.1' and '0x4321FEDC' for IPv6 -- sync with a primary source will look like 'DCN', 'NIST', 'ATOM' -- kiss codes will look like 'AUTH', 'DROP', or 'RATE' Note that the use of an MD5 hash for IPv6 addresses is not for cryptographic purposes."; reference "RFC 5905: Network Time Protocol Version 4: Protocol and Algorithms Specification, Section 7.3"; } typedef ntp-date-and-time { type union { type yang:date-and-time; type uint8; } description "Follows the date-and-time format when valid values exist. Otherwise, allows for setting a special value such as zero."; reference "RFC 6991: Common YANG Data Types"; } typedef log2seconds { type int8; description "An 8-bit signed integer that represents signed log2 seconds."; } feature ntp-port { description "Support for NTP port configuration"; reference "RFC 5905: Network Time Protocol Version 4: Protocol and Algorithms Specification, Section 7.2"; } feature authentication { description "Support for NTP symmetric key authentication"; reference "RFC 5905: Network Time Protocol Version 4: Protocol and Algorithms Specification, Section 7.3"; } feature deprecated { description "Support deprecated MD5-based authentication (RFC 8573), SHA-1, or any other deprecated authentication mechanism. It is enabled to support legacy compatibility when secure cryptographic algorithms are not available to use. It is also used to configure keystrings in ASCII format."; reference "RFC 1321: The MD5 Message-Digest Algorithm, RFC 3174: US Secure Hash Algorithm 1 (SHA1), SHS: Secure Hash Standard (SHS) (FIPS PUB 180-4)"; } feature hex-key-string { description "Support hexadecimal key string"; } feature access-rules { description "Support for NTP access control"; reference "RFC 5905: Network Time Protocol Version 4: Protocol and Algorithms Specification, Section 9.2"; } feature unicast-configuration { description "Support for NTP client/server or active/passive in unicast"; reference "RFC 5905: Network Time Protocol Version 4: Protocol and Algorithms Specification, Section 3"; } feature broadcast-server { description "Support for broadcast server"; reference "RFC 5905: Network Time Protocol Version 4: Protocol and Algorithms Specification, Section 3"; } feature broadcast-client { description "Support for broadcast client"; reference "RFC 5905: Network Time Protocol Version 4: Protocol and Algorithms Specification, Section 3"; } feature multicast-server { description "Support for multicast server"; reference "RFC 5905: Network Time Protocol Version 4: Protocol and Algorithms Specification, Section 3.1"; } feature multicast-client { description "Support for multicast client"; reference "RFC 5905: Network Time Protocol Version 4: Protocol and Algorithms Specification, Section 3.1"; } feature manycast-server { description "Support for manycast server"; reference "RFC 5905: Network Time Protocol Version 4: Protocol and Algorithms Specification, Section 3.1"; } feature manycast-client { description "Support for manycast client"; reference "RFC 5905: Network Time Protocol Version 4: Protocol and Algorithms Specification, Section 3.1"; } identity unicast-configuration-type { description "This defines NTP unicast mode of operation as used for unicast-configurations."; } identity uc-server { base unicast-configuration-type; description "Use client association mode where the unicast server address is configured."; } identity uc-peer { base unicast-configuration-type; description "Use symmetric active association mode where the peer address is configured."; } identity association-mode { description "The NTP association modes"; reference "RFC 5905: Network Time Protocol Version 4: Protocol and Algorithms Specification, Section 3"; } identity active { base association-mode; description "Use symmetric active association mode (mode 1). This device may synchronize with its NTP peer or provide synchronization to a configured NTP peer."; } identity passive { base association-mode; description "Use symmetric passive association mode (mode 2). This device has learned this association dynamically. This device may synchronize with its NTP peer."; } identity client { base association-mode; description "Use client association mode (mode 3). This device will not provide synchronization to the configured NTP server."; } identity server { base association-mode; description "Use server association mode (mode 4). This device will provide synchronization to NTP clients."; } identity broadcast-server { base association-mode; description "Use broadcast server mode (mode 5). This mode defines that it's either working as a broadcast server or a multicast server."; } identity broadcast-client { base association-mode; description "This mode defines that it's either working as a broadcast client (mode 6) or a multicast client."; } identity access-mode { description "This defines NTP access-modes. These identify how the ACL is applied with NTP."; reference "RFC 5905: Network Time Protocol Version 4: Protocol and Algorithms Specification, Section 9.2"; } identity peer-access-mode { base access-mode; description "Permit others to synchronize their time with this NTP or vice versa. NTP control queries are also accepted. This enables full access authority."; } identity server-access-mode { base access-mode; description "Permit others to synchronize their time with this NTP entity, but vice versa is not supported. NTP control queries are accepted."; } identity server-only-access-mode { base access-mode; description "Permit others to synchronize their time with this NTP entity, but vice versa is not supported. NTP control queries are not accepted."; } identity query-only-access-mode { base access-mode; description "Only control queries are accepted."; } identity clock-state { description "This defines NTP clock status at a high level."; } identity synchronized { base clock-state; description "Indicates that the local clock has been synchronized with an NTP server or the reference clock."; } identity unsynchronized { base clock-state; description "Indicates that the local clock has not been synchronized with any NTP server."; } identity ntp-sync-state { description "This defines NTP clock sync state at a more granular level. Referred to as 'Clock state definitions' in RFC 5905."; reference "RFC 5905: Network Time Protocol Version 4: Protocol and Algorithms Specification, Appendix A.1.1"; } identity clock-never-set { base ntp-sync-state; description "Indicates the clock was never set."; } identity freq-set-by-cfg { base ntp-sync-state; description "Indicates the clock frequency is set by NTP configuration or file."; } identity spike { base ntp-sync-state; description "Indicates a spike is detected."; } identity freq { base ntp-sync-state; description "Indicates the frequency mode."; } identity clock-synchronized { base ntp-sync-state; description "Indicates that the clock is synchronized."; } identity crypto-algorithm { description "Base identity of cryptographic algorithm options."; } identity md5 { base crypto-algorithm; description "The MD5 algorithm. Note that RFC 8573 deprecates the use of MD5-based authentication."; reference "RFC 1321: The MD5 Message-Digest Algorithm"; } identity sha-1 { base crypto-algorithm; description "The SHA-1 algorithm"; reference "RFC 3174: US Secure Hash Algorithm 1 (SHA1)"; } identity hmac-sha-1 { base crypto-algorithm; description "HMAC-SHA-1 authentication algorithm"; reference "SHS: Secure Hash Standard (SHS) (FIPS PUB 180-4)"; } identity hmac-sha1-12 { base crypto-algorithm; description "The HMAC-SHA1-12 algorithm"; } identity hmac-sha-256 { description "HMAC-SHA-256 authentication algorithm"; reference "SHS: Secure Hash Standard (SHS) (FIPS PUB 180-4)"; } identity hmac-sha-384 { description "HMAC-SHA-384 authentication algorithm"; reference "SHS: Secure Hash Standard (SHS) (FIPS PUB 180-4)"; } identity hmac-sha-512 { description "HMAC-SHA-512 authentication algorithm"; reference "SHS: Secure Hash Standard (SHS) (FIPS PUB 180-4)"; } identity aes-cmac { base crypto-algorithm; description "The AES-CMAC algorithm -- required by RFC 8573 for MAC for the NTP."; reference "RFC 4493: The AES-CMAC Algorithm, RFC 8573: Message Authentication Code for the Network Time Protocol"; } container ntp { when 'false() = boolean(/sys:system/sys:ntp)' { description "Applicable when the system /sys/ntp/ is not used."; } presence "NTP is enabled and system should attempt to synchronize the system clock with an NTP server from the 'ntp/associations' list."; description "Configuration parameters for NTP"; leaf port { if-feature ntp-port; type inet:port-number { range "123 | 1024..max"; } default "123"; description "Specify the port used to send and receive NTP packets."; reference "RFC 5905: Network Time Protocol Version 4: Protocol and Algorithms Specification, Section 7.2"; } container refclock-master { presence "NTP master clock is enabled."; description "Configures the local clock of this device as NTP server."; leaf master-stratum { type ntp-stratum; default "16"; description "Stratum level from which NTP clients get their time synchronized."; } } // container refclock-master container authentication { if-feature authentication; description "Configuration of authentication"; leaf auth-enabled { type boolean; default "false"; description "Controls whether NTP authentication is enabled or disabled on this device."; } list authentication-keys { key "keyid"; description "List of authentication keys"; leaf keyid { type uint32 { range "1..max"; } description "Authentication key identifier"; } leaf algorithm { type identityref { base crypto-algorithm; } description "Authentication algorithm. Note that RFC 8573 deprecates the use of MD5-based authentication and recommends AES-CMAC."; } container key { description "The key. Note that RFC 8573 deprecates the use of MD5-based authentication."; choice key-string-style { description "Key string styles"; leaf keystring { if-feature deprecated; type string; description "Key string in ASCII format"; } case hexadecimal { if-feature hex-key-string; leaf hexadecimal-string { type yang:hex-string; description "Key in hexadecimal string format. When compared to ASCII, specification in hexadecimal affords greater key entropy with the same number of internal key-string octets. Additionally, it discourages use of well-known words or numbers."; } } // case hexadecimal } // choice key-string-style } // container key leaf istrusted { type boolean; description "Keyid is trusted or not"; } } // list authentication-keys } // container authentication container access-rules { if-feature access-rules; description "Configuration to control access to NTP service by using the NTP access-group feature. The access-mode identifies how the ACL is applied with NTP."; list access-rule { key "access-mode"; description "List of access rules"; reference "RFC 5905: Network Time Protocol Version 4: Protocol and Algorithms Specification, Section 9.2"; leaf access-mode { type identityref { base access-mode; } description "The NTP access-mode. Some of the possible values include peer, server, synchronization, query, etc."; } leaf acl { type leafref { path "/acl:acls/acl:acl/acl:name"; } description "Control access configuration to be used."; } } // list access-rule } // container access-rules container clock-state { config false; description "Clock operational state of the NTP"; container system-status { description "System status of NTP"; leaf clock-state { type identityref { base clock-state; } mandatory true; description "The state of the system clock. Some of the possible values include synchronized and unsynchronized."; } leaf clock-stratum { type ntp-stratum; mandatory true; description "The NTP entity's own stratum value. Should be one greater than the preceding level. 16 if unsynchronized."; reference "RFC 5905: Network Time Protocol Version 4: Protocol and Algorithms Specification, Section 3"; } leaf clock-refid { type refid; mandatory true; description "A code identifying the particular server or reference clock. The interpretation depends upon stratum. It could be an IPv4 address, the first 32 bits of the MD5 hash of the IPv6 address, or a string for the Reference Identifier and kiss codes. Some examples: -- a refclock ID like '127.127.1.0' for local clock sync -- uni/multi/broadcast associations for IPv4 will look like '203.0.113.1' and '0x4321FEDC' for IPv6 -- sync with primary source will look like 'DCN', 'NIST', 'ATOM' -- kiss codes will look like 'AUTH', 'DROP', 'RATE' Note that the use of MD5 hash for IPv6 address is not for cryptographic purposes."; reference "RFC 5905: Network Time Protocol Version 4: Protocol and Algorithms Specification, Section 7.3"; } leaf associations-address { type leafref { path "/ntp:ntp/ntp:associations/ntp:association/ntp:address"; } description "Indicates the association's address that results in clock synchronization."; } leaf associations-local-mode { type leafref { path "/ntp:ntp/ntp:associations/ntp:association/ntp:local-mode"; } description "Indicates the association's local-mode that results in clock synchronization."; } leaf associations-isconfigured { type leafref { path "/ntp:ntp/ntp:associations/ntp:association/ntp:isconfigured"; } description "Indicates if the association (that resulted in the clock synchronization) is explicitly configured."; } leaf nominal-freq { type decimal64 { fraction-digits 4; } units "Hz"; mandatory true; description "The nominal frequency of the local clock. An ideal frequency with zero uncertainty."; } leaf actual-freq { type decimal64 { fraction-digits 4; } units "Hz"; mandatory true; description "The actual frequency of the local clock"; } leaf clock-precision { type log2seconds; mandatory true; description "Clock precision of this system in signed integer format, in log 2 seconds - (prec=2^(-n)). A value of 5 would mean 2^-5 = 0.03125 seconds = 31.25 ms."; reference "RFC 5905: Network Time Protocol Version 4: Protocol and Algorithms Specification, Section 7.3"; } leaf clock-offset { type decimal64 { fraction-digits 3; } units "milliseconds"; description "The signed time offset to the current selected reference time source, e.g., '0.032ms' or '1.232ms'. The negative value indicates that the local clock is behind the current selected reference time source."; reference "RFC 5905: Network Time Protocol Version 4: Protocol and Algorithms Specification, Section 9.1"; } leaf root-delay { type decimal64 { fraction-digits 3; } units "milliseconds"; description "Total delay along the path to the root clock"; reference "RFC 5905: Network Time Protocol Version 4: Protocol and Algorithms Specification, Sections 4 and 7.3"; } leaf root-dispersion { type decimal64 { fraction-digits 3; } units "milliseconds"; description "The dispersion to the local clock and the root clock, e.g., '6.927ms'."; reference "RFC 5905: Network Time Protocol Version 4: Protocol and Algorithms Specification, Sections 4, 7.3, and 10"; } leaf reference-time { type ntp-date-and-time; description "The reference timestamp. Time when the system clock was last set or corrected."; reference "RFC 5905: Network Time Protocol Version 4: Protocol and Algorithms Specification, Section 7.3"; } leaf sync-state { type identityref { base ntp-sync-state; } mandatory true; description "The synchronization status of the local clock. Referred to as 'Clock state definitions' in RFC 5905."; reference "RFC 5905: Network Time Protocol Version 4: Protocol and Algorithms Specification, Appendix A.1.1"; } } // container system-status } // container clock-state list unicast-configuration { if-feature unicast-configuration; key "address type"; description "List of NTP unicast-configurations"; leaf address { type inet:ip-address; description "Address of this association"; } leaf type { type identityref { base unicast-configuration-type; } description "The unicast configuration type, for example, unicast-server"; } container authentication { if-feature authentication; description "Authentication used for this association"; choice authentication-type { description "Type of authentication"; leaf keyid { type leafref { path "/ntp:ntp/ntp:authentication/ntp:authentication-keys/ntp:keyid"; } description "Authentication key id referenced in this association."; } } // choice authentication-type } // container authentication leaf prefer { type boolean; default "false"; description "Whether or not this association is preferred"; } leaf burst { type boolean; default "false"; description "If set, a series of packets are sent instead of a single packet within each synchronization interval to achieve faster synchronization."; reference "RFC 5905: Network Time Protocol Version 4: Protocol and Algorithms Specification, Section 13.1"; } leaf iburst { type boolean; default "false"; description "If set, a series of packets are sent instead of a single packet within the initial synchronization interval to achieve faster initial synchronization."; reference "RFC 5905: Network Time Protocol Version 4: Protocol and Algorithms Specification, Section 13.1"; } leaf source { type if:interface-ref; description "The interface whose IP address is used by this association as the source address."; } leaf minpoll { type log2seconds; default "6"; description "The minimum poll interval used in this association"; reference "RFC 5905: Network Time Protocol Version 4: Protocol and Algorithms Specification, Section 7.2"; } leaf maxpoll { type log2seconds; default "10"; description "The maximum poll interval used in this association"; reference "RFC 5905: Network Time Protocol Version 4: Protocol and Algorithms Specification, Section 7.2"; } leaf port { if-feature ntp-port; type inet:port-number { range "123 | 1024..max"; } default "123"; description "Specify the port used to send NTP packets."; reference "RFC 5905: Network Time Protocol Version 4: Protocol and Algorithms Specification, Section 7.2"; } leaf version { type ntp-version; description "NTP version"; } } // list unicast-configuration container associations { description "Association parameters"; list association { key "address local-mode isconfigured"; config false; description "List of NTP associations. Here address, local-mode, and isconfigured are required to uniquely identify a particular association. Let's take the following examples: 1) If RT1 is acting as broadcast server and RT2 is acting as broadcast client, then RT2 will form a dynamic association with the address as RT1, local-mode as client, and isconfigured as false. 2) When RT2 is configured with unicast server RT1, then RT2 will form an association with the address as RT1, local-mode as client, and isconfigured as true. Thus, all three leaves are needed as key to uniquely identify the association."; leaf address { type inet:ip-address; description "The remote address of this association. Represents the IP address of a unicast/multicast/broadcast address."; } leaf local-mode { type identityref { base association-mode; } description "Local-mode of this NTP association"; } leaf isconfigured { type boolean; description "Indicates if this association is configured (true) or dynamically learned (false)."; } leaf stratum { type ntp-stratum; description "The association stratum value"; reference "RFC 5905: Network Time Protocol Version 4: Protocol and Algorithms Specification, Section 3"; } leaf refid { type refid; description "A code identifying the particular server or reference clock. The interpretation depends upon stratum. It could be an IPv4 address or first 32 bits of the MD5 hash of the IPv6 address or a string for the Reference Identifier and kiss codes. Some examples: -- a refclock ID like '127.127.1.0' for local clock sync -- uni/multi/broadcast associations for IPv4 will look like '203.0.113.1' and '0x4321FEDC' for IPv6 -- sync with primary source will look like 'DCN', 'NIST', or 'ATOM' -- kiss codes will look like 'AUTH', 'DROP', or 'RATE' Note that the use of an MD5 hash for IPv6 address is not for cryptographic purposes."; reference "RFC 5905: Network Time Protocol Version 4: Protocol and Algorithms Specification, Section 7.3"; } leaf authentication { if-feature authentication; type leafref { path "/ntp:ntp/ntp:authentication/ntp:authentication-keys/ntp:keyid"; } description "Authentication key used for this association"; } leaf prefer { type boolean; default "false"; description "Indicates if this association is preferred"; } leaf peer-interface { type if:interface-ref; description "The interface that is used for communication"; } leaf minpoll { type log2seconds; default "6"; description "The minimum poll interval used in this association"; reference "RFC 5905: Network Time Protocol Version 4: Protocol and Algorithms Specification, Section 7.2"; } leaf maxpoll { type log2seconds; default "10"; description "The maximum poll interval used in this association"; reference "RFC 5905: Network Time Protocol Version 4: Protocol and Algorithms Specification, Section 7.2"; } leaf port { if-feature ntp-port; type inet:port-number { range "123 | 1024..max"; } default "123"; description "Specify the port used to send NTP packets."; reference "RFC 5905: Network Time Protocol Version 4: Protocol and Algorithms Specification, Section 7.2"; } leaf version { type ntp-version; description "NTP version"; } leaf reach { type uint8; description "An 8-bit shift register that tracks packet generation and receipt. It is used to determine whether the server is reachable and the data are fresh."; reference "RFC 5905: Network Time Protocol Version 4: Protocol and Algorithms Specification, Sections 9.2 and 13"; } leaf unreach { type uint8; units "seconds"; description "A count of how long in second the server has been unreachable, i.e., the reach value has been zero."; reference "RFC 5905: Network Time Protocol Version 4: Protocol and Algorithms Specification, Sections 9.2 and 13"; } leaf poll { type log2seconds; description "The polling interval for current association in signed log2 seconds."; reference "RFC 5905: Network Time Protocol Version 4: Protocol and Algorithms Specification, Section 7.3"; } leaf now { type uint32; units "seconds"; description "The time since the last NTP packet was received or last synchronized."; } leaf offset { type decimal64 { fraction-digits 3; } units "milliseconds"; description "The signed offset between the local clock and the peer clock, e.g., '0.032ms' or '1.232ms'. The negative value indicates that the local clock is behind the peer."; reference "RFC 5905: Network Time Protocol Version 4: Protocol and Algorithms Specification, Section 8"; } leaf delay { type decimal64 { fraction-digits 3; } units "milliseconds"; description "The network delay between the local clock and the peer clock"; reference "RFC 5905: Network Time Protocol Version 4: Protocol and Algorithms Specification, Section 8"; } leaf dispersion { type decimal64 { fraction-digits 3; } units "milliseconds"; description "The root dispersion between the local clock and the peer clock."; reference "RFC 5905: Network Time Protocol Version 4: Protocol and Algorithms Specification, Section 10"; } leaf originate-time { type ntp-date-and-time; description "This is the local time, in timestamp format, when the latest NTP packet was sent to the peer (called T1)."; reference "RFC 5905: Network Time Protocol Version 4: Protocol and Algorithms Specification, Section 8"; } leaf receive-time { type ntp-date-and-time; description "This is the local time, in timestamp format, when the latest NTP packet arrived at the peer (called T2). If the peer becomes unreachable, the value is set to zero."; reference "RFC 5905: Network Time Protocol Version 4: Protocol and Algorithms Specification, Section 8"; } leaf transmit-time { type ntp-date-and-time; description "This is the local time, in timestamp format, at which the NTP packet departed the peer (called T3). If the peer becomes unreachable, the value is set to zero."; reference "RFC 5905: Network Time Protocol Version 4: Protocol and Algorithms Specification, Section 8"; } leaf input-time { type ntp-date-and-time; description "This is the local time, in timestamp format, when the latest NTP message from the peer arrived (called T4). If the peer becomes unreachable, value is set to zero."; reference "RFC 5905: Network Time Protocol Version 4: Protocol and Algorithms Specification, Section 8"; } container ntp-statistics { description "Per peer packet send and receive statistics"; leaf discontinuity-time { type ntp-date-and-time; description "The time on the most recent occasion at which any one or more of these NTP counters suffered a discontinuity. If no such discontinuities have occurred, then this node contains the time the NTP association was (re-)initialized."; } leaf packet-sent { type yang:counter32; description "The total number of NTP packets delivered to the transport service by this NTP entity for this association. Discontinuities in the value of this counter can occur upon cold start, reinitialization of the NTP entity or the management system, and at other times."; } leaf packet-sent-fail { type yang:counter32; description "The number of times NTP packet sending failed."; } leaf packet-received { type yang:counter32; description "The total number of NTP packets delivered to the NTP entity from this association. Discontinuities in the value of this counter can occur upon cold start, reinitialization of the NTP entity or the management system, and at other times."; } leaf packet-dropped { type yang:counter32; description "The total number of NTP packets that were delivered to this NTP entity from this association and that this entity was not able to process due to an NTP error. Discontinuities in the value of this counter can occur upon cold start, reinitialization of the NTP entity or the management system, and at other times."; } } // container ntp-statistics } // list association } // container associations container interfaces { description "Configuration parameters for NTP interfaces"; list interface { key "name"; description "List of interfaces"; leaf name { type if:interface-ref; description "The interface name"; } container broadcast-server { if-feature broadcast-server; presence "NTP broadcast-server is configured on this interface."; description "Configuration of broadcast server"; reference "RFC 5905: Network Time Protocol Version 4: Protocol and Algorithms Specification, Section 3.1"; leaf ttl { type uint8; description "Specifies the time to live (TTL) for a broadcast packet"; reference "RFC 5905: Network Time Protocol Version 4: Protocol and Algorithms Specification, Section 3.1"; } container authentication { if-feature authentication; description "Authentication used on this interface"; choice authentication-type { description "Type of authentication"; leaf keyid { type leafref { path "/ntp:ntp/ntp:authentication/ntp:authentication-keys/ntp:keyid"; } description "Authentication key id referenced in this association."; } } // choice authentication-type } // container authentication leaf minpoll { type log2seconds; default "6"; description "The minimum poll interval used in this association"; reference "RFC 5905: Network Time Protocol Version 4: Protocol and Algorithms Specification, Section 7.2"; } leaf maxpoll { type log2seconds; default "10"; description "The maximum poll interval used in this association"; reference "RFC 5905: Network Time Protocol Version 4: Protocol and Algorithms Specification, Section 7.2"; } leaf port { if-feature ntp-port; type inet:port-number { range "123 | 1024..max"; } default "123"; description "Specify the port used to send NTP packets."; reference "RFC 5905: Network Time Protocol Version 4: Protocol and Algorithms Specification, Section 7.2"; } leaf version { type ntp-version; description "NTP version"; } } // container broadcast-server container broadcast-client { if-feature broadcast-client; presence "NTP broadcast-client is configured on this interface."; description "Configuration of broadcast client"; reference "RFC 5905: Network Time Protocol Version 4: Protocol and Algorithms Specification, Section 3.1"; } // container broadcast-client list multicast-server { if-feature multicast-server; key "address"; description "Configuration of multicast server"; reference "RFC 5905: Network Time Protocol Version 4: Protocol and Algorithms Specification, Section 3.1"; leaf address { type rt-types:ip-multicast-group-address; description "The IP address to send NTP multicast packets"; } leaf ttl { type uint8; description "Specifies the TTL for a multicast packet"; reference "RFC 5905: Network Time Protocol Version 4: Protocol and Algorithms Specification, Section 3.1"; } container authentication { if-feature authentication; description "Authentication used on this interface"; choice authentication-type { description "Type of authentication"; leaf keyid { type leafref { path "/ntp:ntp/ntp:authentication/ntp:authentication-keys/ntp:keyid"; } description "Authentication key id referenced in this association."; } } // choice authentication-type } // container authentication leaf minpoll { type log2seconds; default "6"; description "The minimum poll interval used in this association"; reference "RFC 5905: Network Time Protocol Version 4: Protocol and Algorithms Specification, Section 7.2"; } leaf maxpoll { type log2seconds; default "10"; description "The maximum poll interval used in this association"; reference "RFC 5905: Network Time Protocol Version 4: Protocol and Algorithms Specification, Section 7.2"; } leaf port { if-feature ntp-port; type inet:port-number { range "123 | 1024..max"; } default "123"; description "Specify the port used to send NTP packets."; reference "RFC 5905: Network Time Protocol Version 4: Protocol and Algorithms Specification, Section 7.2"; } leaf version { type ntp-version; description "NTP version"; } } // list multicast-server list multicast-client { if-feature multicast-client; key "address"; description "Configuration of a multicast client"; reference "RFC 5905: Network Time Protocol Version 4: Protocol and Algorithms Specification, Section 3.1"; leaf address { type rt-types:ip-multicast-group-address; description "The IP address of the multicast group to join"; } } // list multicast-client list manycast-server { if-feature manycast-server; key "address"; description "Configuration of a manycast server"; reference "RFC 5905: Network Time Protocol Version 4: Protocol and Algorithms Specification, Section 3.1"; leaf address { type rt-types:ip-multicast-group-address; description "The multicast group IP address to receive manycast client messages."; } } // list manycast-server list manycast-client { if-feature manycast-client; key "address"; description "Configuration of manycast-client"; reference "RFC 5905: Network Time Protocol Version 4: Protocol and Algorithms Specification, Section 3.1"; leaf address { type rt-types:ip-multicast-group-address; description "The group IP address that the manycast client broadcasts the request message to"; } container authentication { if-feature authentication; description "Authentication used on this interface"; choice authentication-type { description "Type of authentication"; leaf keyid { type leafref { path "/ntp:ntp/ntp:authentication/ntp:authentication-keys/ntp:keyid"; } description "Authentication key id referenced in this association."; } } // choice authentication-type } // container authentication leaf ttl { type uint8; description "Specifies the maximum TTL for the expanding ring search"; reference "RFC 5905: Network Time Protocol Version 4: Protocol and Algorithms Specification, Section 3.1"; } leaf minclock { type uint8; description "The minimum manycast survivors in this association"; reference "RFC 5905: Network Time Protocol Version 4: Protocol and Algorithms Specification, Section 13.2"; } leaf maxclock { type uint8; description "The maximum manycast candidates in this association"; reference "RFC 5905: Network Time Protocol Version 4: Protocol and Algorithms Specification, Section 13.2"; } leaf beacon { type log2seconds; description "The beacon is the upper limit of the poll interval. When the TTL reaches its limit without finding the minimum number of manycast servers, the poll interval increases until reaching the beacon value, when it starts over from the beginning."; reference "RFC 5905: Network Time Protocol Version 4: Protocol and Algorithms Specification, Section 13.2"; } leaf minpoll { type log2seconds; default "6"; description "The minimum poll interval used in this association"; reference "RFC 5905: Network Time Protocol Version 4: Protocol and Algorithms Specification, Section 7.2"; } leaf maxpoll { type log2seconds; default "10"; description "The maximum poll interval used in this association"; reference "RFC 5905: Network Time Protocol Version 4: Protocol and Algorithms Specification, Section 7.2"; } leaf port { if-feature ntp-port; type inet:port-number { range "123 | 1024..max"; } default "123"; description "Specify the port used to send NTP packets."; reference "RFC 5905: Network Time Protocol Version 4: Protocol and Algorithms Specification, Section 7.2"; } leaf version { type ntp-version; description "NTP version"; } } // list manycast-client } // list interface } // container interfaces container ntp-statistics { config false; description "Total NTP packet statistics"; leaf discontinuity-time { type ntp-date-and-time; description "The time on the most recent occasion at which any one or more of these NTP counters suffered a discontinuity. If no such discontinuities have occurred, then this node contains the time the NTP association was (re-)initialized."; } leaf packet-sent { type yang:counter32; description "The total number of NTP packets delivered to the transport service by this NTP entity for this association. Discontinuities in the value of this counter can occur upon cold start, reinitialization of the NTP entity or the management system, and at other times."; } leaf packet-sent-fail { type yang:counter32; description "The number of times NTP packet sending failed."; } leaf packet-received { type yang:counter32; description "The total number of NTP packets delivered to the NTP entity from this association. Discontinuities in the value of this counter can occur upon cold start, reinitialization of the NTP entity or the management system, and at other times."; } leaf packet-dropped { type yang:counter32; description "The total number of NTP packets that were delivered to this NTP entity from this association and that this entity was not able to process due to an NTP error. Discontinuities in the value of this counter can occur upon cold start, reinitialization of the NTP entity or the management system, and at other times."; } } // container ntp-statistics } // container ntp rpc statistics-reset { description "Reset statistics collected."; input { choice association-or-all { description "Resets statistics for a particular association or all."; case association { description "This resets all the statistics collected for the association."; leaf associations-address { type leafref { path "/ntp:ntp/ntp:associations/ntp:association/ntp:address"; } description "Indicates the association's address that results in clock synchronization."; } leaf associations-local-mode { type leafref { path "/ntp:ntp/ntp:associations/ntp:association/ntp:local-mode"; } description "Indicates the association's local-mode that results in clock synchronization."; } leaf associations-isconfigured { type leafref { path "/ntp:ntp/ntp:associations/ntp:association/ntp:isconfigured"; } description "Indicates if the association (that resulted in the clock synchronization) is explicitly configured."; } } // case association case all { description "This resets all the statistics collected."; } // case all } // choice association-or-all } } // rpc statistics-reset } // module ietf-ntp
© 2023 YumaWorks, Inc. All rights reserved.