module ieee802-dot1q-pb {

    yang-version 1.1;

    namespace
      'urn:ieee:std:802.1Q:yang:ieee802-dot1q-pb';

    prefix dot1q-pb;

    import ieee802-dot1q-bridge {
      prefix dot1q;
    }
    import ieee802-dot1q-types {
      prefix dot1qtypes;
    }
    import ietf-interfaces {
      prefix if;
    }

    organization "IEEE 802.1 Working Group";

    contact
      "WG-URL: http://ieee802.org/1/
    WG-EMail: stds-802-1-l@ieee.org
    
    Contact: IEEE 802.1 Working Group Chair
    Postal: C/O IEEE 802.1 Working Group
          IEEE Standards Association
          445 Hoes Lane
          Piscataway, NJ 08854
          USA
    
    E-mail: stds-802-1-chairs@ieee.org";

    description
      "This YANG module describes the Bridge configuration model for Provider
    Bridges.
    
    Copyright (C) IEEE (2023).
    
    This version of this YANG module is part of IEEE Std 802.1Q; see the
    standard itself for full legal notices.";

    revision "2023-10-22" {
      description
        "Published as part of IEEE Std 802.1Qcw-2023.
      
      The following reference statement identifies each referenced IEEE
      Standard as updated by applicable amendments.";
      reference
        "IEEE Std 802.1Q Bridges and Bridged Networks:
        IEEE Std 802.1Q-2022, IEEE Std 802.1Qcz-2023, IEEE Std 802.1Qcw-2023.";

    }

    revision "2022-01-19" {
      description
        "Published as part of IEEE Std 802.1Q-2022.";
      reference
        "IEEE Std 802.1Q-2022, Bridges and Bridged Networks.";

    }

    revision "2020-06-04" {
      description
        "Published as part of IEEE Std 802.1Qcx-2020. Second version.";
      reference
        "IEEE Std 802.1Qcx-2020, Bridges and Bridged Networks - YANG Data
        Model for Connectivity Fault Management.";

    }

    revision "2018-03-07" {
      description
        "Published as part of IEEE Std 802.1Q-2018. Initial version.";
      reference
        "IEEE Std 802.1Q-2018, Bridges and Bridged Networks.";

    }


    augment /if:interfaces/if:interface/dot1q:bridge-port {
      description
        "Augment the interface model with 802.1Q Bridge Port configuration
      specific nodes.";
      leaf svid {
        type dot1qtypes:vlanid;
        description
          "Service VLAN identifier.";
        reference
          "12.13.2.1 of IEEE Std 802.1Q";

      }

      list cvid-registration {
        when
          "/dot1q:bridges/dot1q:bridge[dot1q:name=current()"
            + "/../dot1q:bridge-name]/dot1q:component[dot1q:name=current()"
            + "/../dot1q:component-name]/dot1q:type = 'dot1q:c-vlan-component'"
            + " and ../dot1q:port-type = 'dot1q:customer-edge-port'" {
          description
            "Applies when the component associated with this interface is a
          C-VLAN component and the port-type is a customer edge port.";
        }
        key "cvid";
        description
          "The C-VID Registration Table, provides a mapping between a C-VID
        and the service instance represented by an S-VID selected for that
        C-VLAN. This table provides the equivalent functionality of
           1) Configuring the PVID of the internal CNP on the S-VLAN
              component
           2) Adding the corresponding PEP on the C-VLAN component to the
              member set of the C-VLAN
           3) Adding the PEP and/or CEP to the untagged set of the C-VLAN
              (if it is desired that frames forwarded to that port are
              transmitted untagged for this C-VLAN).";
        leaf cvid {
          type dot1qtypes:vlanid;
          description
            "Customer VLAN identifiers associated with this bridge port.";
          reference
            "12.13.2.1 of IEEE Std 802.1Q";

        }

        leaf svid {
          type dot1qtypes:vlanid;
          description
            "Service VLAN identifier.";
          reference
            "12.13.2.1 of IEEE Std 802.1Q";

        }

        leaf untagged-pep {
          type boolean;
          default "true";
          description
            "A boolean indicating frames for this C-VLAN should be forwarded
          untagged through the Provider Edge Port.";
          reference
            "12.13.2.1 of IEEE Std 802.1Q";

        }

        leaf untagged-cep {
          type boolean;
          default "true";
          description
            "A boolean indicating frames for this C-VLAN should be forwarded
          untagged through the Customer Edge Port.";
          reference
            "12.13.2.1 of IEEE Std 802.1Q";

        }
      }  // list cvid-registration

      list service-priority-regeneration {
        when
          "/dot1q:bridges/dot1q:bridge[dot1q:name=current() "
            + "/../dot1q:bridge-name]/dot1q:component[dot1q:name=current() "
            + "/../dot1q:component-name]/dot1q:type = 'dot1q:c-vlan-component' "
            + "and ../dot1q:port-type = 'dot1q:customer-edge-port'" {
          description
            "Applies when the component associated with this interface is a
          C-VLAN component and the port-type is a customer edge port.";
        }
        key "svid";
        description
          "The Service Priority Regeneration Table, which provides the
        Priority Regeneration Table (12.6.2) for each internal CNP connected
        to the C-VLAN component associated with the CEP.";
        leaf svid {
          type dot1qtypes:vlanid;
          description
            "Service VLAN identifier.";
          reference
            "12.13.2.6 of IEEE Std 802.1Q";

        }

        container priority-regeneration {
          description
            "Contains Service Priority Regeneration table nodal information.";
          reference
            "12.13.2.6 of IEEE Std 802.1Q";

          uses dot1qtypes:priority-regeneration-table-grouping;
        }  // container priority-regeneration
      }  // list service-priority-regeneration

      list rcap-internal-interface {
        when
          "/dot1q:bridges/dot1q:bridge[dot1q:name=current() "
            + "/../dot1q:bridge-name]/dot1q:component[dot1q:name=current() "
            + "/../dot1q:component-name]/dot1q:type = 'dot1q:s-vlan-component' "
            + "and ../dot1q:port-type = 'dot1q:remote-customer-access-port'" {
          description
            "Applies when the component associated with this interface is a
          C-VLAN component and the port-type is a customer edge port.";
        }
        key "external-svid";
        description
          "Designating an external port as an RCAP automatically creates a
        Port-mapping S-VLAN component associated with that port. This
        Port-mapping S-VLAN component includes one internal PNP.";
        leaf external-svid {
          type dot1qtypes:vlanid;
          description
            "External Service VLAN identifier.";
          reference
            "12.13.3.2 of IEEE Std 802.1Q";

        }

        leaf internal-port-number {
          type dot1qtypes:port-number-type;
          description
            "The number of the RCAP.";
          reference
            "12.13.3.2 of IEEE Std 802.1Q";

        }

        leaf internal-svid {
          type dot1qtypes:vlanid;
          description
            "Internal Service VLAN Identifier (not applicable for a C-tagged
          RCSI).";
          reference
            "12.13.3.2 of IEEE Std 802.1Q";

        }

        leaf internal-interface-type {
          type enumeration {
            enum "port-based-rcsi" {
              value 0;
              description "Port-based RCSI";
            }
            enum "c-tagged-rcsi" {
              value 1;
              description "C-tagged RCSI";
            }
            enum "pnp" {
              value 2;
              description
                "Provider Network Port";
            }
            enum "discard" {
              value 3;
              description
                "Discard (external S-VID is not associated with an internal
              port).";
            }
          }
          description
            "A value indicating the type of internal interface associated with
          the external S-VID.";
          reference
            "12.13.3.2 of IEEE Std 802.1Q";

        }
      }  // list rcap-internal-interface
    }
  }  // module ieee802-dot1q-pb