module ieee802-dot1q-lldp-pbbn-aa-tlv {

    yang-version 1.1;

    namespace
      'urn:ieee:std:802.1Q:yang:ieee802-dot1q-lldp-pbbn-aa-tlv';

    prefix lldp-aa-tlv;

    import ieee802-dot1ab-lldp {
      prefix lldp;
    }
    import ieee802-dot1q-types {
      prefix dot1qtypes;
    }

    organization
      "Institute of Electrical and Electronics Engineers";

    contact
      "WG-URL: http://ieee802.org/1/
    WG-EMail: stds-802-1-l@ieee.org
    Contact: IEEE 802.1 Working Group Chair
    Postal: C/O IEEE 802.1 Working Group
       IEEE Standards Association
       445 Hoes Lane
       Piscataway, NJ 08854
       USA
    
    E-mail: stds-802-1-chairs@ieee.org";

    description
      "LLDP PBBN Auto Attach TLVs

    Copyright (C) IEEE (2023).

    This version of this YANG module is part of IEEE Std 802.1Q; see the
    standard itself for full legal notices.";

    revision "2023-10-26" {
      description
        "Published as part of IEEE Std 802.1Qcj-2023.

      The following reference statement identifies each referenced IEEE
      Standard as updated by applicable amendments.";
      reference
        "IEEE Std 802.1Q Bridges and Bridged Networks:
        IEEE Std 802.1Q-2022, IEEE Std 802.1Qcz-2023, IEEE Std 802.1Qcw-2023,
        IEEE Std 802.1Qcj-2023.
        IEEE Std 802 Overview and Architecture: IEEE Std 802-2014.";

    }


    identity assoc-state-selector {
      description
        "Specify the state of the association between the AAS entities as
      described by D.2.17.5 of IEEE Std 802.1Q";
    }

    identity not-ready {
      base assoc-state-selector;
      description
        "Indicates the association state of NOT_READY as specified in D.2.17.5
      of IEEE Std 802.1Q. Signaled as the value 0x00.";
    }

    identity ready-to-assoc {
      base assoc-state-selector;
      description
        "Indicates the association state of READY_TO_ASSOC as specified in
      D.2.17.5 of IEEE Std 802.1Q. Signaled as the value 0x01.";
    }

    identity ready-to-attach {
      base assoc-state-selector;
      description
        "Indicates the association state of READY_TO_ATTACH as specified in
      D.2.17.5 of IEEE Std 802.1Q. Signaled as the value 0x02.";
    }

    identity assoc-failed-types {
      base assoc-state-selector;
      description
        "Indicates the association state of ASSOC_FAILED_TYPES as specified
      in D.2.17.5 of IEEE Std 802.1Q. Signaled as the value 0x12.";
    }

    identity assoc-failed-tags {
      base assoc-state-selector;
      description
        "Indicates the association state of ASSOC_FAILED_TAGS as specified
      in D.2.17.5 of IEEE Std 802.1Q. Signaled as the value 0x22.";
    }

    identity assoc-failed-topo {
      base assoc-state-selector;
      description
        "Indicates the association state of ASSOC_FAILED_TOPO as specified
      in D.2.17.5 of IEEE Std 802.1Q. Signaled as the value 0x32.";
    }

    identity assoc-failed-other {
      base assoc-state-selector;
      description
        "Indicates the association state of ASSOC_FAILED_OTHER as specified
      in D.2.17.5 of IEEE Std 802.1Q. Signaled as the value 0x42.";
    }

    identity assoc-attached {
      base assoc-state-selector;
      description
        "Indicates the association state of ASSOC_ATTACHED as specified in
      D.2.17.5 of IEEE Std 802.1Q. Signaled as the value 0x03.";
    }

    identity assoc-standby {
      base assoc-state-selector;
      description
        "Indicates the association state of ASSOC_STANDBY as specified in
      D.2.17.5 of IEEE Std 802.1Q. Signaled as the value 0x13.";
    }

    identity assoc-invalid {
      base assoc-state-selector;
      description
        "Indicates the association state of ASSOC_INVALID as specified in
      D.2.17.5 of IEEE Std 802.1Q. Signaled as the value 0x23.";
    }

    identity system-type-selector {
      description
        "Specify the selection of the PPBN Auto-attach system type as
      specified in D.2.17.7 of IEEE Std 802.1Q";
    }

    identity aab-system {
      base system-type-selector;
      description
        "Indicates the system type of an Auto Attach BEB (AAB) in the PPBN
      Auto Attach System TLV specified in D.2.17 of IEEE Std 802.1Q.
      Signaled as the value 1.";
    }

    identity aad-cvlan-system {
      base system-type-selector;
      description
        "Indicates the system type of a C-VLAN aware Auto Attach Device
      (AAD) in the PPBN Auto Attach System TLV specified in D.2.17 of
      IEEE Std 802.1Q. Signaled as the value 2.";
    }

    identity aad-vlan-unaware-system {
      base system-type-selector;
      description
        "Indicates the system type of a VLAN unaware Auto Attach Device
      (AAD) in the PPBN Auto Attach System TLV specified in D.2.17 of
      IEEE Std 802.1Q. Signaled as the value 3.";
    }

    identity aad-svlan-system {
      base system-type-selector;
      description
        "Indicates the system type of a S-VLAN aware Auto Attach Device
      (AAD) in the PPBN Auto Attach System TLV specified in D.2.17 of
      IEEE Std 802.1Q. Signaled as the value 4.";
    }

    identity tagging-selector {
      description
        "Specify the tagging field selection of the PPBN Auto Attach System
      TLV as specified in D.2.17.8 of IEEE Std 802.1Q";
    }

    identity tagged-only {
      base tagging-selector;
      description
        "Indicates the AAD link tagging requirement of all VLAN tagged in
      AAD sourced frames. Signaled as the value 0 in the PPBN Auto Attach
      System TLV specified in D.2.17 of IEEE Std 802.1Q.";
    }

    identity untagged-or-tagged {
      base tagging-selector;
      description
        "Indicates the AAD link tagging requirement of untagged and VLAN
      tagged in AAD sourced frames. Signaled as the value 1 in the PPBN
      Auto Attach System TLV specified in D.2.17 of IEEE Std 802.1Q.";
    }

    identity untagged-only {
      base tagging-selector;
      description
        "Indicates the AAD link tagging requirement of all untagged in AAD
      sourced frames. Signaled as the value 2 in the PPBN Auto Attach
      System TLV specified in D.2.17 of IEEE Std 802.1Q.";
    }

    identity assignment-status-selector {
      description
        "Specify the status of an assignment in the PBBN Auto Attach
      Assignment TLV sent by the AAB for each VID/I-SID assignment request.";
    }

    identity pending {
      base assignment-status-selector;
      description
        "Indicates the AAB is processing the assignment. This status is
      used by the AAD while it is waiting for a response from the AAB as
      described in D.2.18.6 of IEEE Std 802.1Q. Signaled as the value 1.";
    }

    identity accepted {
      base assignment-status-selector;
      description
        "Indicates the AAB assignment processing request is complete for
      the VID/I-SID and the VLAN to BSI connection has been established
      as described in D.2.18.6 of IEEE Std 802.1Q. Signaled as the value
      2.";
    }

    identity rejected-generic {
      base assignment-status-selector;
      description
        "Indicates an undefined rejection has occurred as described in
      D.2.18.6 of IEEE Std 802.1Q. Signaled as the value 3.";
    }

    identity rejected-resource {
      base assignment-status-selector;
      description
        "Indicates a rejection has occurred due to system resources being
      unavailable as described in D.2.18.6 of IEEE Std 802.1Q. Signaled
      as the value 4.";
    }

    identity rejected-invalid-vlan {
      base assignment-status-selector;
      description
        "Indicates a rejection has occurred because the VID value is
      outside the range of 1 to 4094 as described in D.2.18.6 of IEEE Std
      802.1Q. Signaled as the value 5.";
    }

    identity rejected-vlan-resource {
      base assignment-status-selector;
      description
        "Indicates a rejection has occurred due to maximum VLAN resource
      limits have been reached as described in D.2.18.6 of IEEE Std
      802.1Q. Signaled as the value 6.";
    }

    identity rejected-invalid-isid {
      base assignment-status-selector;
      description
        "Indicates a rejection has occurred because the I-SID value is
      outside of the range 1 or 256 through 16777214 as described in
      D.2.18.6 of IEEE Std 802.1Q. Signaled as the value 7.";
    }

    identity rejected-isid-resource {
      base assignment-status-selector;
      description
        "Indicates a rejection has occurred due to maximum I-SID resource
      limits have been reached as described in D.2.18.6 of IEEE Std
      802.1Q. Signaled as the value 8.";
    }

    identity rejected-application {
      base assignment-status-selector;
      description
        "Indicates a rejection has occurred because of an issue with Auto
      Attach agent functions on the AAB as described in D.2.18.6 of IEEE
      Std 802.1Q. Signaled as the value 9.";
    }

    identity rejected-policy {
      base assignment-status-selector;
      description
        "Indicates a rejection has occurred because the Auto Attach
      assignment processing is subject to a policy or rule on the AAB
      where the assignment requested is not permitted or denied as
      described in D.2.18.6 of IEEE Std 802.1Q. Signaled as the value 10.";
    }

    typedef aa-isid-type {
      type dot1qtypes:isid-type {
        range "1 | 256..16777214";
      }
      description
        "The aa-i-sid type represents a Backbone Service Instance
      Identifier (I-SID). This is the 24-bit I-SID field used in the
      I-TAG TCI of a Provider Backbone Bridging frame. The values 0,
      2-254, and 16777215 are reserved for future standardization. The
      value 255 is dedicated to use by the SPB protocol. For Auto Attach
      values 2-255 are not allowed.";
      reference
        "D.2.18.8 of IEEE Std 802.1Q.";

    }

    typedef port-netid-type {
      type binary {
        length "12";
      }
      description
        "A 12-octet binary string representing the PortNetID fields of the
      PPBN Auto Attach System TLV as specified in D.2.17 of IEEE Std
      802.1Q. The 12 octet field uniquely identifies an Auto Attach port
      within the administrative domain used for Auto Attach. The first 6
      octets of the string are the binary representation of the system's
      MAC address. The next 2 octets are reserved and have the value 0.
      The last 4 octets are the integer IfIndex for the port.";
      reference
        "D.2.17.10 of IEEE Std 802.1Q";

    }
  }  // module ieee802-dot1q-lldp-pbbn-aa-tlv