| ccm-interval-type |
enumeration |
Indicates the interval at which CCM PDUs are sent by a MEP. |
| ccm-interval-type |
enumeration |
Indicates the interval at which CCM PDUs are sent by a MEP. |
| ccm-interval-type |
enumeration |
Indicates the interval at which CCM PDUs are sent by a MEP. |
| ccm-interval-type |
enumeration |
Indicates the interval at which CCM PDUs are sent by a MEP. |
| config-error-type |
bits |
While making the MIP creation evaluation described in 22.2.3, the
management entity can encounter errors in the configuration. |
| config-error-type |
bits |
While making the MIP creation evaluation described in
22.2.3, the management entity can encounter errors in
the configuration. |
| config-error-type |
bits |
While making the MIP creation evaluation described in 22.2.3, the
management entity can encounter errors in the configuration. |
| config-error-type |
bits |
While making the MIP creation evaluation described in 22.2.3, the
management entity can encounter errors in the configuration. |
| egress-action-field-value-type |
enumeration |
Possible values returned in the egress action field. |
| egress-action-field-value-type |
enumeration |
Possible values returned in the egress action field. |
| egress-action-field-value-type |
enumeration |
Possible values returned in the egress action field. |
| egress-action-field-value-type |
enumeration |
Possible values returned in the egress action field. |
| fault-alarm-type |
enumeration |
The Fault Alarm indicators. |
| fault-alarm-type |
enumeration |
The Fault Alarm indicators. |
| fault-alarm-type |
enumeration |
The Fault Alarm indicators. |
| fault-alarm-type |
enumeration |
The Fault Alarm indicators. |
| fng-state-type |
enumeration |
Indicates the different states of the MEP Fault Notification
Generator State Machine. |
| fng-state-type |
enumeration |
Indicates the different states of the MEP Fault Notification
Generator State Machine. |
| fng-state-type |
enumeration |
Indicates the different states of the MEP Fault Notification
Generator State Machine. |
| fng-state-type |
enumeration |
Indicates the different states of the MEP Fault Notification
Generator State Machine. |
| highest-defect-priority-type |
enumeration |
An enumerated value, equal to the contents of the variable
highestDefect (20.35.9 and Table 20-1), indicating the
highest-priority defect that has been present since the MEP Fault
Notification Generator State Machine was last in the FNG_RESET
state. The integer value assigned to the enum value determines the
priority. The higher value corresponds to the higher priority. |
| highest-defect-priority-type |
enumeration |
An enumerated value, equal to the contents of the variable
highestDefect (20.35.9 and Table 20-1), indicating the
highest-priority defect that has been present since the MEP
Fault Notification Generator State Machine was last in the
FNG_RESET state.
The integer value assigned to the enum value determines the
priority. The higher value corresponds to the higher priority. |
| highest-defect-priority-type |
enumeration |
An enumerated value, equal to the contents of the variable
highestDefect (20.35.9 and Table 20-1), indicating the
highest-priority defect that has been present since the MEP Fault
Notification Generator State Machine was last in the FNG_RESET
state. The integer value assigned to the enum value determines the
priority. The higher value corresponds to the higher priority. |
| highest-defect-priority-type |
enumeration |
An enumerated value, equal to the contents of the variable
highestDefect (20.35.9 and Table 20-1), indicating the
highest-priority defect that has been present since the MEP Fault
Notification Generator State Machine was last in the FNG_RESET state.
The integer value assigned to the enum value determines the priority.
The higher value corresponds to the higher priority. |
| ingress-action-field-value-type |
enumeration |
Possible values returned in the ingress action field. |
| ingress-action-field-value-type |
enumeration |
Possible values returned in the ingress action field. |
| ingress-action-field-value-type |
enumeration |
Possible values returned in the ingress action field. |
| ingress-action-field-value-type |
enumeration |
Possible values returned in the ingress action field. |
| interface-status-tlv-value-type |
enumeration |
An enumerated value from the Interface Status TLV from the last
CCM received from the last MEP. It indicates the status of the
Interface within which the MEP transmitting the CCM is configured,
or the next lower Interface in the Interface Stack, if the MEP is
not configured within an Interface. |
| interface-status-tlv-value-type |
enumeration |
An enumerated value from the Interface Status TLV from the last
CCM received from the last MEP. It indicates the status of the
Interface within which the MEP transmitting the CCM is configured,
or the next lower Interface in the Interface Stack, if the MEP is
not configured within an Interface. |
| interface-status-tlv-value-type |
enumeration |
An enumerated value from the Interface Status TLV from the last CCM
received from the last MEP. It indicates the status of the Interface
within which the MEP transmitting the CCM is configured, or the next
lower Interface in the Interface Stack, if the MEP is not configured
within an Interface. |
| interface-status-tlv-value-type |
enumeration |
An enumerated value from the Interface Status TLV from the
last CCM received from the last MEP. It indicates the status
of the Interface within which the MEP transmitting the CCM
is configured, or the next lower Interface in the Interface
Stack, if the MEP is not configured within an Interface. |
| lbm-data-tlv-type |
binary |
The loopback message Data TLV type. |
| lbm-data-tlv-type |
binary |
The loopback message Data TLV type. |
| lbm-data-tlv-type |
binary |
The loopback message Data TLV type. |
| lbm-data-tlv-type |
binary |
The loopback message Data TLV type. |
| lowest-alarm-priority-type |
enumeration |
Specifies the lowest priority defect that is allowed to generate a
Fault Alarm (20.9.5). The to be reported defects are identified per
enum value. |
| lowest-alarm-priority-type |
enumeration |
Specifies the lowest priority defect that is allowed to generate
a Fault Alarm (20.9.5). The to be reported defects are identified
per enum value. |
| lowest-alarm-priority-type |
enumeration |
Specifies the lowest priority defect that is allowed to
generate a Fault Alarm (20.9.5). The to be reported defects
are identified per enum value. |
| lowest-alarm-priority-type |
enumeration |
Specifies the lowest priority defect that is allowed to generate
a Fault Alarm (20.9.5). The to be reported defects are identified
per enum value. |
| md-level-type |
uint8 |
Integer identifying the Maintenance Domain Level (MD Level).
Higher numbers correspond to higher Maintenance Domains,
those with the greatest physical reach, with the highest
values for customers' CFM PDUs. Lower numbers correspond
to lower Maintenance Domains, those with more limited
physical reach, with the lowest values for CFM PDUs
protecting single bridges or physical links. |
| md-level-type |
uint8 |
Integer identifying the Maintenance Domain Level (MD Level). Higher
numbers correspond to higher Maintenance Domains, those with the
greatest physical reach, with the highest values for customers' CFM
PDUs. Lower numbers correspond to lower Maintenance Domains, those
with more limited physical reach, with the lowest values for CFM PDUs
protecting single bridges or physical links. |
| md-level-type |
uint8 |
Integer identifying the Maintenance Domain Level (MD Level).
Higher numbers correspond to higher Maintenance Domains, those
with the greatest physical reach, with the highest values for
customers' CFM PDUs. Lower numbers correspond to lower Maintenance
Domains, those with more limited physical reach, with the lowest
values for CFM PDUs protecting single bridges or physical links. |
| md-level-type |
uint8 |
Integer identifying the Maintenance Domain Level (MD Level).
Higher numbers correspond to higher Maintenance Domains, those
with the greatest physical reach, with the highest values for
customers' CFM PDUs. Lower numbers correspond to lower Maintenance
Domains, those with more limited physical reach, with the lowest
values for CFM PDUs protecting single bridges or physical links. |
| mep-defects-type |
bits |
A MEP can detect and report a number of defects, and multiple
defects can be present at the same time. |
| mep-defects-type |
bits |
A MEP can detect and report a number of defects, and multiple defects
can be present at the same time. |
| mep-defects-type |
bits |
A MEP can detect and report a number of defects, and multiple
defects can be present at the same time. |
| mep-defects-type |
bits |
A MEP can detect and report a number of defects, and multiple
defects can be present at the same time. |
| mep-id-type |
uint16 |
Maintenance association End Point Identifier, which is
unique over a given Maintenance Association. |
| mep-id-type |
uint16 |
Maintenance association End Point Identifier, which is unique over a
given Maintenance Association. |
| mep-id-type |
uint16 |
Maintenance association End Point Identifier, which is unique
over a given Maintenance Association. |
| mep-id-type |
uint16 |
Maintenance association End Point Identifier, which is unique
over a given Maintenance Association. |
| mep-tx-ltm-flags-type |
bits |
The flags field for LTMs transmitted by the MEP. |
| mep-tx-ltm-flags-type |
bits |
The flags field for LTMs transmitted by the MEP. |
| mep-tx-ltm-flags-type |
bits |
The flags field for LTMs transmitted by the MEP. |
| mep-tx-ltm-flags-type |
bits |
The flags field for LTMs transmitted by the MEP. |
| mhf-creation-type |
enumeration |
Indicates if the Management Entity can create MHFs. |
| mhf-creation-type |
enumeration |
Indicates if the Management Entity can create MHFs. |
| mhf-creation-type |
enumeration |
Indicates if the Management Entity can create MHFs. |
| mhf-creation-type |
enumeration |
Indicates if the Management Entity can create MHFs. |
| mp-direction-type |
enumeration |
Indicates the direction in which the Maintenance Point (MEP or
MIP) faces on the Bridge Port. |
| mp-direction-type |
enumeration |
Indicates the direction in which the Maintenance
Point (MEP or MIP) faces on the Bridge Port. |
| mp-direction-type |
enumeration |
Indicates the direction in which the Maintenance Point (MEP or
MIP) faces on the Bridge Port. |
| mp-direction-type |
enumeration |
Indicates the direction in which the Maintenance Point (MEP or MIP)
faces on the Bridge Port. |
| mp-type |
enumeration |
Indicates the type of Maintenance Point. |
| mp-type |
enumeration |
Indicates the type of Maintenance Point. |
| mp-type |
enumeration |
Indicates the type of Maintenance Point. |
| mp-type |
enumeration |
Indicates the type of Maintenance Point. |
| multicast-class1-mac-address-type |
string |
The multicast class 1 MAC address must take the form of
01-80-C2-00-00-3x, where x represents the MEG level, with x being a
value in the range of 0..7. |
| multicast-class1-mac-address-type |
string |
The multicast class 1 MAC address must take the
form of 01-80-C2-00-00-3x, where x represents
the MEG level, with x being a value in the range
of 0..7. |
| multicast-class1-mac-address-type |
string |
The multicast class 1 MAC address must take the form of
01-80-C2-00-00-3x, where x represents the MEG level, with x being
a value in the range of 0..7. |
| multicast-class1-mac-address-type |
string |
The multicast class 1 MAC address must take the form of
01-80-C2-00-00-3x, where x represents the MEG level, with x being
a value in the range of 0..7. |
| name-key-type |
string |
String type with at least 1 and up to 255 of the specified
characters. |
| name-key-type |
string |
String type with at least 1 and up to 255 of the specified
characters. |
| name-key-type |
string |
String type with at least 1 and up to 255 of the specified
characters. |
| name-key-type |
string |
String type with at least 1 and up to 255 of the specified
characters. |
| port-status-tlv-value-type |
enumeration |
An enumerated value from the Port Status TLV from the last CCM
received from the last MEP. It indicates the ability of the Bridge
Port on which the transmitting MEP resides to pass ordinary data,
regardless of the status of the MAC. |
| port-status-tlv-value-type |
enumeration |
An enumerated value from the Port Status TLV from the last CCM
received from the last MEP. It indicates the ability of the Bridge
Port on which the transmitting MEP resides to pass ordinary data,
regardless of the status of the MAC. |
| port-status-tlv-value-type |
enumeration |
An enumerated value from the Port Status TLV from the last CCM
received from the last MEP. It indicates the ability of the
Bridge Port on which the transmitting MEP resides to pass
ordinary data, regardless of the status of the MAC. |
| port-status-tlv-value-type |
enumeration |
An enumerated value from the Port Status TLV from the last CCM
received from the last MEP. It indicates the ability of the Bridge
Port on which the transmitting MEP resides to pass ordinary data,
regardless of the status of the MAC. |
| relay-action-field-value-type |
enumeration |
Possible values the Relay action field can take. |
| relay-action-field-value-type |
enumeration |
Possible values the Relay action field can take. |
| relay-action-field-value-type |
enumeration |
Possible values the Relay action field can take. |
| relay-action-field-value-type |
enumeration |
Possible values the Relay action field can take. |
| remote-mep-state-type |
enumeration |
Operational state of the remote MEP state machine. This state
machine monitors the reception of valid CCMs from a remote MEP
with a specific MEPID. It uses a timer that expires in 3.5 times
the length of time indicated by the MA's ccm-interval object. |
| remote-mep-state-type |
enumeration |
Operational state of the remote MEP state machine. This state machine
monitors the reception of valid CCMs from a remote MEP with a specific
MEPID. It uses a timer that expires in 3.5 times the length of time
indicated by the MA's ccm-interval object. |
| remote-mep-state-type |
enumeration |
Operational state of the remote MEP state machine. This state
machine monitors the reception of valid CCMs from a remote MEP
with a specific MEPID. It uses a timer that expires in 3.5 times
the length of time indicated by the MA's ccm-interval object. |
| remote-mep-state-type |
enumeration |
Operational state of the remote MEP state machine. This
state machine monitors the reception of valid CCMs from a
remote MEP with a specific MEPID. It uses a timer that
expires in 3.5 times the length of time indicated by the
MA's ccm-interval object. |
| sender-id-permission-type |
enumeration |
Indicates what, if anything, is to be included in the Sender ID
TLV transmitted in CCMs, LBMs, LTMs, and LTRs. |
| sender-id-permission-type |
enumeration |
Indicates what, if anything, is to be included in the Sender ID
TLV transmitted in CCMs, LBMs, LTMs, and LTRs. |
| sender-id-permission-type |
enumeration |
Indicates what, if anything, is to be included in the Sender ID TLV
transmitted in CCMs, LBMs, LTMs, and LTRs. |
| sender-id-permission-type |
enumeration |
Indicates what, if anything, is to be included in the Sender
ID TLV transmitted in CCMs, LBMs, LTMs, and LTRs. |
| seq-number-type |
uint32 |
The transaction identifier or sequence number of the CFM PDU. |
| seq-number-type |
uint32 |
The transaction identifier or sequence number of the CFM PDU. |
| seq-number-type |
uint32 |
The transaction identifier or sequence number of the CFM PDU. |
| seq-number-type |
uint32 |
The transaction identifier or sequence number of the CFM PDU. |
| service-selector-type |
enumeration |
A value that represents a type (and thereby the format) of a
service-selector-value. |
| service-selector-type |
enumeration |
A value that represents a type (and thereby the format)
of a service-selector-value. |
| service-selector-type |
enumeration |
A value that represents a type (and thereby the format) of a
service-selector-value. |
| service-selector-type |
enumeration |
A value that represents a type (and thereby the format) of a
service-selector-value. |
| service-selector-value-type |
uint32 |
An integer that uniquely identifies a generic MAC Service,
or none. Examples of service selectors are a VLAN-ID
and an I-SID. A service-selector-value value is always
interpreted within the context of a service-selector-type
value. Every usage of the service-selector-value textual
convention is required to specify the
service-selector-type object that provides the context.
The value of a service-selector-value object must
always be consistent with the value of the associated
service-selector-type object. Attempts to set a
service-selector-value object to a value inconsistent
with the associated service-selector-type must fail
with an inconsistent-value error. |
| service-selector-value-type |
uint32 |
An integer that uniquely identifies a generic MAC Service, or
none. Examples of service selectors are a VLAN-ID and an I-SID. A
service-selector-value value is always interpreted within the
context of a service-selector-type value. Every usage of the
service-selector-value textual convention is required to specify
the service-selector-type object that provides the context. The
value of a service-selector-value object must always be consistent
with the value of the associated service-selector-type object.
Attempts to set a service-selector-value object to a value
inconsistent with the associated service-selector-type must fail
with an inconsistent-value error. |
| service-selector-value-type |
uint32 |
An integer that uniquely identifies a generic MAC Service, or
none. Examples of service selectors are a VLAN-ID and an I-SID. A
service-selector-value value is always interpreted within the
context of a service-selector-type value. Every usage of the
service-selector-value textual convention is required to specify
the service-selector-type object that provides the context. The
value of a service-selector-value object must always be consistent
with the value of the associated service-selector-type object.
Attempts to set a service-selector-value object to a value
inconsistent with the associated service-selector-type must fail
with an inconsistent-value error. |
| service-selector-value-type |
uint32 |
An integer that uniquely identifies a generic MAC Service, or none.
Examples of service selectors are a VLAN-ID and an I-SID. A
service-selector-value value is always interpreted within the context
of a service-selector-type value. Every usage of the
service-selector-value textual convention is required to specify the
service-selector-type object that provides the context. The value of a
service-selector-value object must always be consistent with the value
of the associated service-selector-type object. Attempts to set a
service-selector-value object to a value inconsistent with the
associated service-selector-type must fail with an inconsistent-value
error. |
| unicast-mac-address-type |
string |
A unicast destination MAC address. The I/G address bit is used to
identify the destination MAC address as an individual MAC address
or a group MAC address. If the I/G address bit is 0, it indicates
that the MAC address field is an individual MAC address. If this
bit is 1, the MAC address is a group MAC address that identifies
one or more (or all) stations connected to the IEEE 802 network |
| unicast-mac-address-type |
string |
A unicast destination MAC address. The I/G address bit is used to
identify the destination MAC address as an individual MAC address or a
group MAC address. If the I/G address bit is 0, it indicates that the
MAC address field is an individual MAC address. If this bit is 1, the
MAC address is a group MAC address that identifies one or more (or
all) stations connected to the IEEE 802 network |
| unicast-mac-address-type |
string |
A unicast destination MAC address. The I/G address bit is
used to identify the destination MAC address as an individual
MAC address or a group MAC address. If the I/G address bit is
0, it indicates that the MAC address field is an individual
MAC address. If this bit is 1, the MAC address is a group MAC
address that identifies one or more (or all) stations
connected to the IEEE 802 network |
| unicast-mac-address-type |
string |
A unicast destination MAC address. The I/G address bit is used to
identify the destination MAC address as an individual MAC address
or a group MAC address. If the I/G address bit is 0, it indicates
that the MAC address field is an individual MAC address. If this
bit is 1, the MAC address is a group MAC address that identifies
one or more (or all) stations connected to the IEEE 802 network |