module ieee802-dot1q-cbsa {

    yang-version 1;

    namespace
      "urn:ieee:std:802.1Q:yang:ieee802-dot1q-cbsa";

    prefix cbsa;

    import ieee802-dot1q-types {
      prefix dot1q-types;
    }

    organization "IEEE 802.1 Working Group";

    contact
      "WG-URL: http://www.ieee802.org/1/
WG-EMail: stds-802-1-L@ieee.org

Contact: IEEE 802.1 Working Group Chair
Postal: C/O IEEE 802.1 Working Group
IEEE Standards Association
445 Hoes Lane
Piscataway, NJ 08854
USA

E-mail: stds-802-1-chairs@ieee.org";

    description
      "This module provides for management of IEEE Std 802.1Q components
that support the credit-based shaper algorithm.

Copyright (C) IEEE (2024)

This version of this YANG module is part of IEEE Std 802.1Q; see the
standard itself for full legal notices.";

    revision "2024-03-22" {
      description
        "Published as part of IEEE Std 802.1Qdx-2024.

The following reference statement identifies each referenced IEEE
Standard as updated by applicable amendments.";
      reference
        "IEEE Std 802.1Q Bridges and Bridged Networks:
        IEEE Std 802.1Q-2022, IEEE Std 802.1Qcz-2023, IEEE Std 802.1Qcw-2023,
        IEEE Std 802.1Qcj-2023, IEEE Std 802.1Qdx-2024.";

    }


    grouping cbsa-parameters {
      description
        "cbsa-parameters comprises all the parameters associated
with the credit-based shaper algorithm.";
      container cbsa {
        description
          "This container comprises all credit-based shaper algorithm related
nodes.";
        list cbsa-parameter-table {
          key "traffic-class";
          max-elements 8;
          description
            "There is one cbsa-parameter-table list per Port. Each list entry
corresponds to the set of parameters (12.20.1) for each traffic class
configured for use with the credit-based shaper algorithm (8.6.8.2).
The cbsa-parameter-table list is valid for a Bridge Port only when
used in the absence of the stream reservation protocol.";
          reference
            "8.6.8.2, 34.3, 34.6, and 12.20.1 of IEEE Std 802.1Q.";

          leaf traffic-class {
            type dot1q-types:traffic-class-type;
            description
              "An 802.1 traffic class value. This is the numerical value
associated with a traffic class. Larger values are associated with
higher priority traffic classes.";
            reference
              "8.6.8 of IEEE Std 802.1Q.";

          }

          leaf admin-idle-slope {
            type uint64;
            units "bits/second";
            default "0";
            description
              "The bandwidth, in bits per second, that has been requested by
management to be reserved for use by the queue associated with
this traffic class.

If the stream reservation protocol is in operation for this traffic
class, this parameter has no effect.

If the stream reservation protocol is not in operation for this
traffic class, then the value of oper-idle-slope is equal to the
value of admin-idle-slope.";
            reference
              "34.3 of IEEE Std 802.1Q.";

          }

          leaf oper-idle-slope {
            type uint64;
            units "bits/second";
            default "0";
            config false;
            description
              "The actual bandwidth, in bits per second, that is currently
reserved for use by the queue associated with this traffic class
(see 34.6.1 and 34.6.2).";
            reference
              "34.3, 34.6.1, and 34.6.2 of IEEE Std 802.1Q.";

          }
        }  // list cbsa-parameter-table
      }  // container cbsa
    }  // grouping cbsa-parameters
  }  // module ieee802-dot1q-cbsa