| arp-ping-ip-instance-input |
ipv4-dest-address probe-count out-if-name timeout result-num history-num description age-time frequency |
ARP ping IP test instance input parameters. |
| global-type |
fec-validation-ldp-enable fec-validation-sr-prefix-enable lspv-cpu-limit jitter-tag-version lbm-receive-enable ltm-receive-enable gmac-ltm-receive-enable lspv-enable lspv-ipv6-enable lspv-fec-compitable-enable gmac-ping-enable gmac-trace-enable test-max-flow-id reflector-max-id vxlan-echo-v4 bier6-oam |
Global configuration. |
| icmp-instance-input |
address ni-name out-if-name fwd-if-name interval probe-count timeout frequency fail-percent data-size data-fill ttl pass-route probe-fails test-fails send-trap-bits compatibility result-num history-num description age-time path-type threshold-rtd priority |
Configure ICMP test instance input. |
| icmp-jitter-instance-input |
address ttl probe-count hardware-enable jitter-packet-num data-size data-fill tos ni-name jitter-mode interval timestamp out-if-name timeout receive-timeunit fail-percent test-failtimes send-trap-bits threshold-owd-ds threshold-owd-sd threshold-rtd threshold-jitter-ds threshold-jitter-sd result-num history-num description age-time frequency |
ICMP jitter test instance input parameters. |
| instances-type |
instance |
The network quality assurance. |
| jitter-instance-input |
address dest-port source-port ttl hardware-enable interval probe-count jitter-packet-num data-size data-fill pass-route tos ni-name code-type adv-factor threshold-owd-ds threshold-owd-sd threshold-rtd fail-percent test-failtimes timestamp out-if-name timeout send-trap-bits result-num history-num description age-time frequency |
Configure jitter test instance input. |
| lsp-jitter-instance-input |
lsp-protocol timeout frag-flag source-address exp ttl interval probe-count jitter-packet-num data-size data-fill fail-percent result-num history-num description age-time frequency |
LSP jitter test instance input parameters. |
| lspping-instance-input |
lsp-protocol timeout frag-flag source-address exp ttl interval probe-count data-size data-fill fail-percent result-num history-num description age-time frequency |
LSP ping test instance input parameters. |
| lsptrace-instance-input |
lsp-protocol frag-flag exp probe-count source-address first-ttl max-ttl timeout hop-fail-times result-num history-num description age-time frequency |
LSP trace test instance input parameters. |
| mac-ping-instance-input |
destination mep-id md-name ma-name interval probe-count timeout data-size source-if-name fail-percent probe-fails test-fails send-trap-bits threshold-rtd jitter-packet-num frequency result-num history-num description age-time |
MAC ping test instance input parameters. |
| path-jitter-instance-input |
dest-address source-address fail-percent timeout first-ttl max-ttl interval probe-count jitter-packet-num data-size data-fill jitter-mode tos ni-name result-num history-num description age-time frequency |
Path jitter test intance input parameters. |
| path-mtu-instance-input |
dest-address source-address ni-name max-mtu step probe-count timeout out-if-name result-num description age-time frequency |
Path MTU test instance input parameters. |
| pwe3-ping-instance-input |
vc-type local-pw-type local-pw-id label-type remote-pw-id dest-address timeout max-ttl exp reply-mode interval probe-count data-size data-fill fail-percent probe-failtimes test-failtimes threshold-rtd send-trap-bits sender-address no-cw-flag ttl-mode frag-flag peer-address result-num history-num description age-time frequency |
PWE3 ping test instance input parameters. |
| pwe3-trace-instance-input |
vc-type local-pw-type local-pw-id label-type dest-address timeout first-ttl max-ttl exp reply-mode packet-count probe-failtimes test-failtimes lsp-version threshold-rtd ttl-mode hop-fail-times frag-flag peer-address no-cw-flag send-trap-bits result-num history-num description age-time frequency |
PWE3 trace test instance input parameters. |
| record-type |
results trace-results lsp-jitter-results path-mtu-results jitter-results arp-ping-ip-results multi-path-results trace-multi-path-results path-jitter-results ethernet-service-results |
NQA test instance test result. |
| reflectors-type |
reflector |
Reflector table. |
| server-type |
icmp-servers udp-servers tcp-servers |
NQA ICMP server configuration. |
| tcp-instance-input |
dest-address source-address interval timeout ttl probe-count tos dest-port source-port pass-route ni-name threshold-rtd probe-fails fail-percent test-fail-times send-trap-bits result-num history-num description age-time frequency |
TCP test instance input parameters. |
| test-flows-type |
test-flow |
Test flow. |
| trace-instance-input |
address timeout first-ttl max-ttl probe-count data-size ni-name result-num history-num description age-time frequency priority data-fill dest-port hop-fail-times pass-route out-if-name test-fail-times threshold-rtd non-fragment send-trap-bits |
Trace test instance input parameters. |
| udp-instance-input |
address dest-port source-port ttl data-size pass-route probe-count send-trap-bits threshold-rtd probe-failtimes test-failtimes tos fail-percent interval ni-name timeout data-fill description result-num history-num age-time frequency |
Configure UDP test instance input. |
| vpls-mac-ping-instance-input |
vsi-name dest-address data-fill data-size exp reply-mode ttl interval fail-percent test-fail-times probe-fail-times send-trap-bits probe-count timeout threshold-rtd vlan frag-flag result-num history-num description age-time frequency |
VPLS MAC ping test instance input parameters. |