| aftr-config |
aftr |
Configure an Address Family Transition Router (AFTR) name. |
| dhcpv6-unshare-only |
enable |
Configure an IPv6 prefix pool to assign only IPv6 addresses not prefixes to users. |
| exclude-ipv6-address |
exclude-ipv6-address |
List of specified IPv6 addresses to prevent it from being allocated to users. The start IPv6 address must be smaller than or equal to the end IPv6 address. |
| export-host-route |
export-host-route |
Enable a device to advertise host routes in a remote address pool. |
| frame-ipv6-lease |
frame-ipv6-lease |
Configure lease for an IPv6 prefix pool. |
| ipv6-constant-index |
constant-index |
Configure a constant index for an IPv6 address or prefix pool. |
| ipv6-pool-comm |
preference lock wait-request-time warning unr-tag |
Set the preference value of an IPv6 address pool. |
| lifetime-config |
lifetime |
Configure the preferred lifetime anf valid lifetime of an IPv6 prefix. |
| lock |
lock |
Lock an IPv6 prefix pool. |
| pd-unshare-only |
pd-unshare-only |
Configure the prefix pool to allocate IP addresses by using only the unshared-mode stateless address autoconfiguration (DHCPv6 IA_PD) protocol. |
| pool-statistics |
address-idle-total-number address-used-total-number prefix-idle-total-number prefix-used-total-number address-total-number address-used-number address-idle-number address-conflict-number address-excluded-number address-used-percent ndra-total-number ndra-used-number ndra-free-number ndra-conflict-number ndra-excluded-number ndra-used-percent pd-total-number pd-used-number pd-free-number pd-conflict-number pd-excluded-number pd-used-percent |
Statistics of IPv6 pool. |
| pool-usage |
address-total-number address-used-number address-used-radio ndra-total-number ndra-used-number ndra-used-radio delegation-total-number delegation-used-number delegation-used-radio |
Display IPv6 address pool usage. |
| rapid-commit-config |
rapid-commit |
Configure the DHCPv6 server to support a rapid two-message exchange (solicit, reply). |
| remote-not-support |
dns-server dns-search-list renew-rebind-time |
Configure the common information for IPv6 pool which is not remote type. |
| reserved-ipv6 |
reserved-ipv6 |
Configure a reservation type for the prefix pool. |
| slaac-unshare-only |
slaac-unshare-only |
Configure the prefix pool to allocate IP addresses by using only the unshared-mode stateless address autoconfiguration (SLAAC) protocol. |
| specified-up |
occupied-policy |
Configure an IPv6 prefix pool to be exclusively used by a vBRAS-UP or UP backup policy profile in CU separation multi-instance scenarios. |
| unicast-option |
unicast-option |
Configure server unicast option. |
| vpn-instance |
vpn-instance |
Specify the VPN instance name of a IPv6 prefix pool. |
| weight |
value |
Configure a weight for an IPv6 address pool. |