| advertise-community-type |
advertise-community |
The community attribute advertisement configuration. |
| advertise-dependent-filter6-group-type |
advertise-dependent-filter6 |
The advertise-dependent-filter-group-type configuration. |
| advertise-dependent-filter6-type |
advertise-dependent-filter6 advertise-dependent-filter6-state |
The advertise-dependent-filter-type configuration. |
| advertise-dependent-filter-group-type |
advertise-dependent-filter |
The advertise-dependent-filter-group-type configuration. |
| advertise-dependent-filter-type |
advertise-dependent-filter advertise-dependent-filter-state |
The advertise-dependent-filter-type configuration. |
| advertise-large-community-group-type |
advertise-large-community |
The advertise-large-community-type configuration. |
| advertise-large-community-type |
advertise-large-community advertise-large-community-state |
The advertise-large-community-type configuration. |
| advertise-route-to-evpn-type |
advertise-route-to-evpn |
Advertise-routes-type configuration. |
| as-path-filter-type |
import-as-path-filter export-as-path-filter |
AS-path-filter-type configuration. |
| authentication-attr-type |
password-type password-text key-chain-name |
Authentication attribute type configuration. |
| bestroute-med-plus-igp-type |
bestroute-med-plus-igp bestroute-med-multiplier bestroute-igp-multiplier bestroute-igp-metric-ignore |
Use the sum of MED multiplied by a MED multiplier and IGP cost multiplied by an IGP cost multiplier to select routes. |
| bestroute-router-id-prior-clusterlist-type |
bestroute-router-id-prior-clusterlist |
Router ID prior CLUSTER_LIST during the best route selection. |
| bfd-detect-parameter-type |
multiplier min-rx-interval min-tx-interval |
BFD detect parameter configuration. |
| bgp-route-preference-options |
preference |
Configuration parameters relating to the BGP routes preference. |
| bit-error-detection-type |
bit-error-detection |
BGP bit-error detection parameters. |
| choice-policy-set |
policy-type |
Specify the route-policy or filter for imported RIBs. |
| common-configure |
route-select-delay reflector-typereflect-change-pathalways-compare-med default-med nexthop-third-party default-local-preference default-route-import routerid-neglect reflect-between-client ext-community-change active-route-advertise ebgp-interface-sensitive |
Configure common options. |
| community-attribute |
advertise-community advertise-ext-community discard-ext-community |
Configure community attribute for peer or peer group. |
| dampening-route-config |
half-life-time reuse suppress ceiling update-standard policy-type |
The dampening route type. |
| default-route-advertise-type |
default-route-advertise default-route-advertise-policy-type |
The default-route-advertise-type configuration. |
| default-route-originate-type |
default-route-originate |
The default-route-originate-type configuration. |
| error-discard-info-type |
error-discard-info |
Statistics of BGP error message. |
| fake-as-type |
fake-as dual-as prepend-global-as prepend-fake-as |
BGP fake-as. |
| global-timer-para-type |
connect-retry-time keep-alive-time hold-time min-hold-time |
BGP timer. |
| graceful-restart-status-type |
graceful-restart-status |
Statistics of the GR status of a BGP speaker. |
| graceful-restart-type |
enable time-wait-for-rib restart-time peer-reset |
Configure the graceful-restart. |
| group-bfd-parameter-type |
bfd-parameter |
Configure BFD for peer group. |
| group-entropy-label-type |
advertise-entropy-label padding attribute-type entropy-label |
Entropy label parameter configuration in a peer group. |
| group-graceful-restart-type |
enable time-wait-for-rib restart-time |
Configure graceful restart. |
| group-hierarchy-convergence |
advertise-hierarchy-convergence |
Configure the current peer group's hierarchy convergence capablity. |
| group-independent-peer-group-type |
update-group-independent |
The independent-peer-group-type configuration. |
| group-origin-as-validation-type |
prefix-origin-as-validation bestroute-origin-as-validation bestroute-allow-invalid-as |
The BGP origin AS validation configuration. |
| group-public-as-only-import-type |
public-as-only-import |
BGP remove private AS number in received BGP update messages configuration options. |
| group-ssl-policy-grouping |
name role server-certificate |
Configure SSL policy for BGP group. |
| import-routes-type |
protocol process-id med policy-type |
Imported routes configuration. |
| ingress-choice-policy-set |
ingress-trigger-policy |
Specify the route-policy or filter for ingress LSPs. |
| ip-prefix-filter-type |
import-ip-prefix export-ip-prefix |
IPv4 prefix filter type configuration. |
| ipv4-aggregate-default-route |
aggregate-default-route |
Configure aggregate default route. |
| ipv4-aggregate-routes |
aggregate-routes |
Configure aggregate routes. |
| ipv4-attribute-set-configuration |
attribute-set-enable attribute-set-mode |
Configure attribute set. |
| ipv4-bestroute-configuration |
best-route-bit-error-detection bestroute-med-plus-igp bestroute-med-multiplier bestroute-igp-multiplier bestroute-igp-metric-ignorebestroute-router-id-prior-clusterlistbestroute-med-none-as-maximum |
Configure best route. |
| ipv4-bestroute-med-plus-igp |
bestroute-med-plus-igp bestroute-med-multiplier bestroute-igp-multiplier bestroute-igp-metric-ignore |
Use the sum of MED multiplied by a MED multiplier and IGP cost multiplied by an IGP cost multiplier to select routes. |
| ipv4-bestroute-router-id-prior-clusterlist |
bestroute-router-id-prior-clusterlist |
Router ID prior CLUSTER_LIST during the best route selection. |
| ipv4-common-configure |
auto-frr nexthop-resolve-aigp summary-automatic supernet-unicast-advertise supernet-label-advertise label-free-delayattribute-set-enable attribute-set-modebest-route-bit-error-detection bestroute-med-plus-igp bestroute-med-multiplier bestroute-igp-multiplier bestroute-igp-metric-ignore bestroute-router-id-prior-clusterlist bestroute-med-none-as-maximummaximum-load-balancing-ibgp maximum-load-balancing-ebgp bestroute-as-path-ignore load-balanc-igp-metric-ignore load-balanc-as-path-ignore load-balanc-as-path-relax maximum-load-balancing ebgp-ecmp-nexthop-changed ibgp-ecmp-nexthop-changed ecmp-nexthop-changed maximum-load-balancing-eibgp eibgp-ecmp-nexthop-changed load-balancing-eibgp-enableadvertise-route-mode import-rib-nexthop-invariable determin-med |
Configure IPv4 unicast common options. |
| ipv4-default-route-match-conditions-type |
default-route-match-conditions |
IPv4 default route matching condition configuration. |
| ipv4-export-filter-policys |
export-filter-policys |
Configure aggregate default route. |
| ipv4-filter-protocol-policy-choice-type |
ipv4-filter-protocol-policy-type |
IPv4 filter protocol policy choice type configuration. |
| ipv4-hierarchy-convergence |
common hierarchy-convergence-routes |
Configure unicast route hierarchy convergence. |
| ipv4-import-filter-protocol-policy-choice-type |
ipv4-import-filter-protocol-policy-type |
IPv4 import filter protocol policy choice type configuration. |
| ipv4-import-filter-protocol-type |
import-filter-policy |
IPv4 import filter protocol type configuration. |
| ipv4-import-route |
import-routes |
Configure imported routes. |
| ipv4-load-balancing-configuration |
maximum-load-balancing-ibgp maximum-load-balancing-ebgp bestroute-as-path-ignore load-balanc-igp-metric-ignore load-balanc-as-path-ignore load-balanc-as-path-relax maximum-load-balancing ebgp-ecmp-nexthop-changed ibgp-ecmp-nexthop-changed ecmp-nexthop-changed maximum-load-balancing-eibgp eibgp-ecmp-nexthop-changed load-balancing-eibgp-enable |
Configure load balancing. |
| ipv4-route-filter |
filter-name filter-parameter |
The route filter configuration. |
| ipv4vpn-export-filter-protocol-type |
export-filter-policy |
VPNv4 export filter protocol type configuration. |
| ipv6-aggregate-default-route |
aggregate-default-route |
Configure aggregate default route. |
| ipv6-aggregate-routes |
aggregate-routes |
Configure aggregate routes. |
| ipv6-bestroute-configuration |
bestroute-med-plus-igp bestroute-med-multiplier bestroute-igp-multiplier bestroute-igp-metric-ignorebestroute-router-id-prior-clusterlistbestroute-med-none-as-maximum |
Configure best route. |
| ipv6-common-configure |
router-id-auto-select router-id supernet-unicast-advertise bestroute-med-plus-igp bestroute-med-multiplier bestroute-igp-multiplier bestroute-igp-metric-ignore bestroute-router-id-prior-clusterlist bestroute-med-none-as-maximummaximum-load-balancing-ibgp maximum-load-balancing-ebgp bestroute-as-path-ignore load-balanc-as-path-ignore load-balanc-as-path-relax maximum-load-balancing ebgp-ecmp-nexthop-changed ibgp-ecmp-nexthop-changed ecmp-nexthop-changed maximum-load-balancing-eibgp eibgp-ecmp-nexthop-changedimport-rib-nexthop-invariable determin-med |
Configure IPv6 unicast common options. |
| ipv6-default-route-match-conditions-type |
default-route-match-conditions |
IPv6 default route matching condition configuration. |
| ipv6-export-filter-protocol-type |
export-filter-policys |
IPv6 export filter protocol type configuration. |
| ipv6-filter-protocol-policy-choice-type |
ipv6-filter-protocol-policy-type |
IPv6 filter protocol policy choice type configuration. |
| ipv6-hierarchy-convergence |
common hierarchy-convergence-routes |
Configure unicast route hierarchy convergence. |
| ipv6-import-filter-protocol-policy-choice-type |
ipv6-import-filter-protocol-policy-type |
IPv6 import filter protocol policy choice type configuration. |
| ipv6-import-filter-protocol-type |
import-filter-policy |
IPv6 import filter protocol type configuration. |
| ipv6-import-route |
import-routes |
Configure imported routes. |
| ipv6-load-balancing-configuration |
maximum-load-balancing-ibgp maximum-load-balancing-ebgp bestroute-as-path-ignore load-balanc-as-path-ignore load-balanc-as-path-relax maximum-load-balancing ebgp-ecmp-nexthop-changed ibgp-ecmp-nexthop-changed ecmp-nexthop-changed maximum-load-balancing-eibgp eibgp-ecmp-nexthop-changed |
Configure load balancing. |
| ipv6-nexthop-recursive-lookup-restrain |
restrain route-policy |
Next hop iteration restrain configuration. |
| ipv6-prefix-filter-type |
import-ipv6-prefix export-ipv6-prefix |
IPv6 prefix filter type configuration. |
| ipv6-qos-local-id-type |
qos |
The QoS configuration. |
| ipv6vpn-export-filter-protocol-type |
export-filter-policy |
VPNV6 export filter protocol type configuration. |
| label-configuration-for-ipv4 |
supernet-unicast-advertise supernet-label-advertise label-free-delay |
Configure label function. |
| load-balancing-configuration |
load-balancing-eibgp-enable load-balanc-igp-metric-ignore load-balanc-as-path-ignore load-balanc-as-path-relax |
The load-balancing configuratin. |
| load-balancing-type |
load-balancing-enable load-balancing-ignore-as-type |
Configure load balancing for peer or peer group. |
| network-route-ipv4 |
address mask-length policy-type |
BGP network routes. |
| network-route-ipv6 |
address mask-length policy-type |
BGP network routes. |
| nexthop-recursive-lookup-default-route |
default-route |
Next hop iteration default route configuration. |
| nexthop-recursive-lookup-delay |
delay |
Next hop change responding delay configuration. |
| nexthop-recursive-lookup-restrain |
restrain policy-type |
Next hop iteration restrain configuration. |
| path-attr-map-type |
path-attribute-treats |
Config bit map of path attribute treat ID. |
| peer-add-path-type |
add-path-mode add-path-number |
Add-Path route advertisement to a peer. |
| peer-bfd-parameter-state-grouping |
bfd-parameter-state |
Statistics of BFD Parameter State. |
| peer-bfd-parameter-type |
bfd-parameter |
Configure BFD for peer. |
| peer-entropy-label-type |
advertise-entropy-label padding attribute-type entropy-label effect-advertise-entropy-label effect-padding effect-attribute-type effect-entropy-label |
Entropy label parameter configuration in a peer. |
| peer-graceful-restart-type |
enable time-wait-for-rib restart-time effect-restart-time effect-time-wait-for-rib effect-enable |
Configure graceful restart. |
| peer-group-acl6-name-or-num-type |
import-acl6-name-or-num export-acl6-name-or-num |
The ACL route policy. |
| peer-group-acl-name-or-num-type |
import-acl-name-or-num export-acl-name-or-num |
The ACL route policy. |
| peer-hierarchy-convergence |
advertise-hierarchy-convergence effect-advertise-hierarchy-convergence |
Configure the current peer's hierarchy convergence capablity. |
| peer-independent-peer-group-type |
update-group-independent update-group-independent-state |
The independent-peer-group-type configuration. |
| peer-ipv4-reoriginate-type |
reoriginate-route-enable reoriginate-ip-enable reoriginate-mac-ip-enable reoriginate-vpnv4-route-enable |
Configure IPv4 regeneration for peer or group. |
| peer-link-bandwidth-type |
advertise transitive generate |
Configure link bandwidth attribute. |
| peer-local-if-type |
local-if-name local-if-address |
Configure peer tracking. |
| peer-origin-as-validation-type |
origin-as-validation |
The BGP peer origin AS validation configuration. |
| peer-policy-filter-type |
import-policy-type export-policy-type |
Configure route policy or filter for peer group. |
| peer-public-as-only-import-type |
public-as-only-import |
BGP remove private AS number in received BGP update messages configuration options. |
| peer-timer-para-type |
timer |
BGP timer. |
| peer-tracking-type |
tracking-enable tracking-delay-time |
Configure peer tracking. |
| preferred-value-type |
preferred-value |
Route update interval configuration. |
| public-as-only-type |
public-as-only |
BGP Remove private AS number from outbound updates configuration options. |
| qos-local-id-policy-choice-type |
local-id-policy |
QoS local ID policy choice type configuration. |
| qos-local-id-type |
qos |
The QoS configuration. |
| reference-period-type |
suppress-interval hold-interval clear-interval |
Configure the reference period. |
| reflect-client-type |
reflect-client |
The route reflector configuration. |
| reflector-cluster-type |
reflector-type |
BGP reflector cluster-id. |
| reflect-type |
reflect-change-path |
Set reflect client or change path-attribute. |
| region-validation-grp |
region-validation |
Enable the BGP region validation. |
| remote-prefix-sid-states-type |
remote-prefix-sid-states |
List of remote prefix SID. |
| route-filter-type |
filter-name filter-parameter |
The route filter configuration. |
| route-limit-accept-type |
route-limit |
BGP route limit configuration options. |
| route-limit-type |
route-limit |
BGP route limit configuration options. |
| route-reflector-ext-community-filter-type |
route-reflector-ext-community-filter |
The reflector route extended community filter configuration. |
| routing-table-rib-only-type |
routing-table-rib-only |
Disable Route Delivery to the IP Routing Table configuration. |
| rt-update-interval-type |
route-update-interval |
Route update interval configuration. |
| safi-lsp-options |
ingress-protect-mode-bgp-frr maximum-load-balancing-ingress |
Parameters relating to options for lsp. |
| slow-peer-type |
slow-peer |
Peer advertising routes slowly configuration. |
| unicast-aggregate-routes-type |
address mask-length as-set detail-suppressed policy-type |
BGP IPv4/IPv6 unicast aggregate routes. |
| vpn-brief-infos-type |
vpn-brief-infos |
List of BGP VPN brief informations. |
| vpn-brief-num-type |
peer-number route-number route-distinguisher-number |
BGP vpn brief statistics information. |
| vpn-target-type |
policy-vpntarget |
BGP IPv4/IPv6 VPN target. |
| vrf-af-dampening-routes |
dampening-routes |
Parameters related to the use of dampening routes. |
| vrf-af-dampening-routes-ext |
dampening-routes |
Parameters related to the use of dampening routes. |