module bbf-xponvani-power-management {

    yang-version 1.1;

    namespace
      "urn:bbf:yang:bbf-xponvani-power-management";

    prefix bbf-xponvani-pwr;

    import ietf-yang-types {
      prefix yang;
    }
    import bbf-yang-types {
      prefix bbf-yang;
    }
    import ietf-interfaces {
      prefix if;
    }
    import bbf-xponvani {
      prefix bbf-xponvani;
    }
    import bbf-xpon-power-management {
      prefix bbf-xpon-pwr;
    }

    organization
      "Broadband Forum <https://www.broadband-forum.org>
     Fiber Access Networks Work Area";

    contact
      "Comments or questions about this Broadband Forum YANG module
     should be directed to <mailto:info@broadband-forum.org>.

     Editor:      Robert Peschi, Nokia

     Editor:      Kevin Noll, Vecima

     PS Leader:   Joey Boyd, Adtran

     WA Director: Marta Seda, Calix";

    description
      "This module contains a collection of YANG definitions for
     supporting the Broadband Forum requirements on management of
     ITU-T Passive Optical Network (PON) interfaces as defined in
     ITU-T G.984.x, G.987.x, ITU-T G.989.x and ITU-T G.9807.x. As
     such, this module is specific to access network equipment (e.g.,
     BBF-specified Access Nodes and FTTdp DPUs).

     Specifically, this module defines Optical Network Unit (ONU)
     power management at the virtual Access Network Interface (vANI).

     Copyright (c) 2018-2023, Broadband Forum

     Redistribution and use in source and binary forms, with or
     without modification, are permitted provided that the following
     conditions are met:

     1. Redistributions of source code must retain the above copyright
        notice, this list of conditions and the following disclaimer.

     2. Redistributions in binary form must reproduce the above
        copyright notice, this list of conditions and the following
        disclaimer in the documentation and/or other materials
        provided with the distribution.

     3. Neither the name of the copyright holder nor the names of its
        contributors may be used to endorse or promote products
        derived from this software without specific prior written
        permission.

     THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
     CONTRIBUTORS \"AS IS\" AND ANY EXPRESS OR IMPLIED WARRANTIES,
     INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
     MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
     DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
     CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
     SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
     NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
     LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
     CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
     STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
     ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
     ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

     The above license is used as a license under copyright only.
     Please reference the Forum IPR Policy for patent licensing terms
     <https://www.broadband-forum.org/ipr-policy>.

     Any moral rights which are necessary to exercise under the above
     license grant are also deemed granted under this license.

     This version of this YANG module is part of TR-385i2a1; see
     the TR itself for full legal notices.";

    revision "2023-06-21" {
      description
        "Issue 2 Amendment 1.
       * Approval Date:    2023-06-21.
       * Publication Date: 2023-06-21.";
      reference
        "TR-385i2a1: ITU-T PON YANG Modules
        	<https://www.broadband-forum.org/technical/download/
        		 TR-385_Issue-2_Amendment-1.pdf>";

    }

    revision "2020-10-13" {
      description
        "Issue 2.
       * Approval Date:    2020-10-13.
       * Publication Date: 2020-10-13.";
      reference
        "TR-385i2: ITU-T PON YANG Modules
        	<https://www.broadband-forum.org/technical/download/
        		 TR-385_Issue-2.pdf>";

    }


    container xponvani-power-management-profiles {
      if-feature bbf-xpon-pwr:xpon-power-management;
      description
        "Power management profiles.";
      list power-management-profile {
        key "name";
        description
          "Optical Network Unit (ONU) power management configuration
parameters.";
        reference
          "ITU-T G.984.3 Annex E
          ITU-T G.987.3 clause 16
          ITU-T G.9807.1 clause C.16.1
          ITU-T G.989.3 clause 16";

        leaf name {
          type bbf-yang:string-ascii64;
          description
            "Power management profile name.";
        }

        leaf ilowpower {
          type uint32;
          units "125 microsecond PHY frames";
          description
            "Ilowpower is the maximum time the Optical Network Unit
(ONU) spends in its LowPower states, as a count of 125 us
PHY frames. Local wake-up indications (LWIs) or remote
events, if detected, may truncate the ONU's sojourn in this
state.";
          reference
            "ITU-T G.984.3 Annex E
            ITU-T G.987.3 clause 16
            ITU-T G.9807.1 clause C.16.1
            ITU-T G.989.3 clause 16";

        }

        leaf iaware {
          type uint32;
          units "125 microsecond PHY frames";
          description
            "Iaware is the minimum time the Optical Network Unit (ONU)
spends in its Aware state before transitioning to the
LowPower state, as a count of 125 microsecond PHY frames.
During the Iaware interval, local or remote events may
independently cause the ONU to enter the ActiveHeld state
rather than returning to the Low Power state.";
          reference
            "ITU-T G.984.3 Annex E
            ITU-T G.987.3 clause 16
            ITU-T G.9807.1 clause C.16.1
            ITU-T G.989.3 clause 16";

        }

        leaf itransinit {
          type uint32;
          units "125 microsecond PHY frames";
          default "0";
          description
            "Complete transceiver initialization time: The time required
for the Optical Network Unit (ONU) to gain full
functionality when leaving the Asleep state (i.e., turning
on both receiver and transmitter), measured in units of
125 microsecond PHY frames, and known by design. The value
of zero indicates that the sleeping ONU can respond to a
bandwidth grant without delay.

itransinit value must be not less than the itransinit value
reported in /interface-state/interface/bbf-xponani:ani/
power-management/itransinit leaf of the associated ONU.";
          reference
            "ITU-T G.984.3 Annex E
            ITU-T G.987.3 clause 16
            ITU-T G.9807.1 clause C.16.1
            ITU-T G.989.3 clause 16";

        }

        leaf itxinit {
          type uint32;
          units "125 microsecond PHY frames";
          default "0";
          description
            "Transmitter initialization time: the time required for the
Optical Network Unit (ONU) to gain full functionality when
leaving the Listen state (i.e., turning on the transmitter
while the receiver has remained on), measured in units of
125 microsecond PHY frames. The value of zero indicates
that the dozing ONU can respond to a bandwidth grant
without delay. This leaf is ignored for G.989.x ONU.

itxinit value must be not less than the itxinit value
reported in /interface-state/interface/bbf-xponani:ani/
power-management/itxinit leaf of the associated ONU.";
          reference
            "ITU-T G.984.3 Annex E
            ITU-T G.987.3 clause 16
            ITU-T G.9807.1 clause C.16.1
            ITU-T G.989.3 clause 16";

        }

        leaf irxoff {
          type uint32;
          units "125 microsecond PHY frames";
          default "0";
          description
            "Irxoff is the maximum time the Optical Line Termination
(OLT) Channel Termination (CT) can afford to wait from the
moment it decides to wake up an Optical Network Unit (ONU)
in the LowPower state until the ONU is fully operational,
specified as a count of 125 microsecond PHY frames.";
          reference
            "ITU-T G.984.3 Annex E
            ITU-T G.987.3 clause 16
            ITU-T G.9807.1 clause C.16.1
            ITU-T G.989.3 clause 16";

        }
      }  // list power-management-profile
    }  // container xponvani-power-management-profiles

    notification onu-power-state-change {
      if-feature bbf-xpon-pwr:xpon-power-management;
      description
        "A notification traceable to a virtual Access Network Interface
       (vANI) which signifies that an Optical Network Unit (ONU) has
       transitioned into the indicated power management state.";
      leaf v-ani-ref {
        type if:interface-ref;
        mandatory true;
        description
          "The virtual Access Network Interface (vANI) which is the
         reference point of the current power management state of the
         Optical Network Unit (ONU).";
      }

      leaf onu-state-last-change {
        type yang:date-and-time;
        mandatory true;
        description
          "The Optical Line Termination (OLT) system date and time when
         the Optical Network Unit (ONU) has transitioned into the
         indicated power state.";
      }

      leaf previous-state {
        type identityref {
          base bbf-xpon-pwr:power-state-base;
        }
        description
          "Previous Optical Network Unit (ONU) power management state at
         the Optical Line Termination (OLT).";
      }

      leaf current-state {
        type identityref {
          base bbf-xpon-pwr:power-state-base;
        }
        description
          "Current Optical Network Unit (ONU) power management state at
         the Optical Line Termination (OLT).";
      }
    }  // notification onu-power-state-change
  }  // module bbf-xponvani-power-management