This module contains a collection of YANG definitions for supporting the Broadband Forum requirements on management of ITU-T Pas...
Version: 2023-06-21
module bbf-xpongemtcont-gemport-performance-management { yang-version 1.1; namespace "urn:bbf:yang:" + "bbf-xpongemtcont-gemport-performance-management"; prefix bbf-xpongemtcont-gemport-pm; import bbf-interfaces-performance-management { prefix bbf-if-pm; } import bbf-yang-types { prefix bbf-yang; } import bbf-xpongemtcont { prefix bbf-xpongemtcont; } organization "Broadband Forum <https://www.broadband-forum.org> Fiber Access Networks Work Area"; contact "Comments or questions about this Broadband Forum YANG module should be directed to <mailto:info@broadband-forum.org>. Editor: Robert Peschi, Nokia Editor: Kevin Noll, Vecima PS Leader: Joey Boyd, Adtran WA Director: Marta Seda, Calix"; description "This module contains a collection of YANG definitions for supporting the Broadband Forum requirements on management of ITU-T Passive Optical Network (PON) interfaces as defined in ITU-T G.984.x, G.987.x, ITU-T G.989.x and ITU-T G.9807.x. As such, this module is specific to access network equipment (e.g., BBF-specified Access Nodes and FTTdp DPUs). Specifically, this module defines the management of performance monitoring of GPON Encapsulation Method (GEM) ports. Copyright (c) 2018-2023, Broadband Forum Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. 3. Neither the name of the copyright holder nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS \"AS IS\" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. The above license is used as a license under copyright only. Please reference the Forum IPR Policy for patent licensing terms <https://www.broadband-forum.org/ipr-policy>. Any moral rights which are necessary to exercise under the above license grant are also deemed granted under this license. This version of this YANG module is part of TR-385i2a1; see the TR itself for full legal notices."; revision "2023-06-21" { description "Issue 2 Amendment 1. * Approval Date: 2023-06-21. * Publication Date: 2023-06-21."; reference "TR-385i2a1: ITU-T PON YANG Modules <https://www.broadband-forum.org/technical/download/ TR-385_Issue-2_Amendment-1.pdf>"; } revision "2020-10-13" { description "Issue 2. * Approval Date: 2020-10-13. * Publication Date: 2020-10-13."; reference "TR-385i2: ITU-T PON YANG Modules <https://www.broadband-forum.org/technical/download/ TR-385_Issue-2.pdf>"; } grouping gemport-performance-counters { description "Counters associated with current and historical 15 minute and 24 hour performance counters."; reference "ITU-T G.987.3 (01/2014) Table 14.1 ITU-T G.989.3 (2015)/Amd.2 (11/2018) Table 14-1 ITU-T G.9807.1 (2016)/Amd.1 (10/2017) Table C.14.1"; leaf out-frames { type bbf-yang:performance-counter64; description "Total number of GPON Encapsulation Method (GEM) frames transmitted."; reference "ITU-T G.987.3 (01/2014) Table 14-1 Transmitted XGEM frames per XGEM port ITU-T G.989.3 (2015)/Amd.2 (11/2018) Table 14-1 Transmitted XGEM frames per XGEM port ITU-T G.9807.1 (2016)/Amd.1 (10/2017) Table C.14.1 Transmitted XGEM frames per XGEM port"; } leaf in-frames { type bbf-yang:performance-counter64; description "Total number of GPON Encapsulation Method (GEM) frames received."; reference "ITU-T G.987.3 (01/2014) Table 14-1 Received XGEM frames per XGEM port ITU-T G.989.3 (2015)/Amd.2 (11/2018) Table 14-1 Received XGEM frames per XGEM port ITU-T G.9807.1 (2016)/Amd.1 (10/2017) Table C.14.1 Received XGEM frames per XGEM port"; } } // grouping gemport-performance-counters grouping gemport-performance { description "G-PON Encapsulation Method (GEM) port performance counters."; container ani-side { description "Counters from the Optical Network Unit's (ONU) perspective."; uses gemport-performance-counters; } // container ani-side container v-ani-side { description "Counters from the Optical Line Termination's (OLT) perspective."; uses gemport-performance-counters; } // container v-ani-side } // grouping gemport-performance augment /bbf-xpongemtcont:xpongemtcont/bbf-xpongemtcont:gemports/bbf-xpongemtcont:gemport { description "Data nodes for the performance configuration parameters."; container performance { description "Performance parameters."; leaf enable { type boolean; default "false"; description "If true, enables counting of performance statistics. Then performance statistics will be available in /xpongemtcont-state/gemports/gemport/performance. i.e., 15 minutes statistics and 24 hours statistics, and for both there are current statistics and history data. If false, then there are no performance statistics."; } } // container performance } augment /bbf-xpongemtcont:xpongemtcont-state/bbf-xpongemtcont:gemports/bbf-xpongemtcont:gemport { description "Data nodes for the performance status parameters."; container performance { description "Performance counters associated with GPON Encapsulation Method (GEM) ports."; container intervals-15min { description "15 minute interval performance history."; container current { description "Current 15 minute interval counters."; uses gemport-performance; } // container current uses bbf-if-pm:performance-15min-history-parameters; list history { key "interval-number"; max-elements 96; description "A history of 15 minute intervals."; leaf interval-number { type bbf-if-pm:performance-15min-history-interval; description "The number of the interval relative to the current interval."; } uses bbf-if-pm:performance-history-15min-interval-parameters; uses gemport-performance; } // list history } // container intervals-15min container intervals-24hr { if-feature bbf-if-pm:performance-24hr; description "24 hour interval performance history."; container current { description "Current 24 hour interval counters."; uses gemport-performance; } // container current uses bbf-if-pm:performance-24hr-history-parameters; list history { key "interval-number"; max-elements 7; description "A history of 24 hour intervals."; leaf interval-number { type bbf-if-pm:performance-24hr-history-interval; description "The number of the interval relative to the current interval."; } uses bbf-if-pm:performance-history-24hr-interval-parameters; uses gemport-performance; } // list history } // container intervals-24hr } // container performance } } // module bbf-xpongemtcont-gemport-performance-management
© 2023 YumaWorks, Inc. All rights reserved.