module bbf-xponani-power-management {

    yang-version 1.1;

    namespace
      "urn:bbf:yang:bbf-xponani-power-management";

    prefix bbf-xponani-pwr;

    import bbf-yang-types {
      prefix bbf-yang;
    }
    import ietf-interfaces {
      prefix if;
    }
    import bbf-xponani {
      prefix bbf-xponani;
    }
    import bbf-xpon-power-management {
      prefix bbf-xpon-pwr;
    }

    organization
      "Broadband Forum <https://www.broadband-forum.org>
     Fiber Access Networks Work Area";

    contact
      "Comments or questions about this Broadband Forum YANG module
     should be directed to <mailto:info@broadband-forum.org>.

     Editor:      Robert Peschi, Nokia

     Editor:      Kevin Noll, Vecima

     PS Leader:   Joey Boyd, Adtran

     WA Director: Marta Seda, Calix";

    description
      "This module contains a collection of YANG definitions for
     supporting the Broadband Forum requirements on management of
     ITU-T Passive Optical Network (PON) interfaces as defined in
     ITU-T G.984.x, G.987.x, ITU-T G.989.x and ITU-T G.9807.x. As
     such, this module is specific to access network equipment (e.g.,
     BBF-specified Access Nodes and FTTdp DPUs).

     Specifically, this module defines Optical Network Unit (ONU)
     power management at the Access Network Interface (ANI).

     Copyright (c) 2018-2023, Broadband Forum

     Redistribution and use in source and binary forms, with or
     without modification, are permitted provided that the following
     conditions are met:

     1. Redistributions of source code must retain the above copyright
        notice, this list of conditions and the following disclaimer.

     2. Redistributions in binary form must reproduce the above
        copyright notice, this list of conditions and the following
        disclaimer in the documentation and/or other materials
        provided with the distribution.

     3. Neither the name of the copyright holder nor the names of its
        contributors may be used to endorse or promote products
        derived from this software without specific prior written
        permission.

     THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
     CONTRIBUTORS \"AS IS\" AND ANY EXPRESS OR IMPLIED WARRANTIES,
     INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
     MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
     DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
     CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
     SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
     NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
     LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
     CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
     STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
     ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
     ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

     The above license is used as a license under copyright only.
     Please reference the Forum IPR Policy for patent licensing terms
     <https://www.broadband-forum.org/ipr-policy>.

     Any moral rights which are necessary to exercise under the above
     license grant are also deemed granted under this license.

     This version of this YANG module is part of TR-385i2a1; see
     the TR itself for full legal notices.";

    revision "2023-06-21" {
      description
        "Issue 2 Amendment 1.
       * Approval Date:    2023-06-21.
       * Publication Date: 2023-06-21.";
      reference
        "TR-385i2a1: ITU-T PON YANG Modules
        	<https://www.broadband-forum.org/technical/download/
        		 TR-385_Issue-2_Amendment-1.pdf>";

    }

    revision "2020-10-13" {
      description
        "Issue 2.
       * Approval Date:    2020-10-13.
       * Publication Date: 2020-10-13.";
      reference
        "TR-385i2: ITU-T PON YANG Modules
        	<https://www.broadband-forum.org/technical/download/
        		 TR-385_Issue-2.pdf>";

    }


    container xponani-power-management-profiles {
      if-feature bbf-xpon-pwr:xpon-power-management;
      description
        "Power management profiles.";
      list power-management-profile {
        key "name";
        description
          "Optical Network Unit (ONU) power management configuration
parameters.";
        reference
          "ITU-T G.988 clause 9.1.14";

        leaf name {
          type bbf-yang:string-ascii64;
          description
            "Power management profile name.";
        }

        leaf-list mode {
          type identityref {
            base bbf-xpon-pwr:power-mode-base;
          }
          min-elements 1;
          description
            "List of enabled power reduction management modes.";
        }

        leaf irxoff {
          type uint32;
          units "125 microsecond PHY frames";
          description
            "Irxoff the maximum time the Optical Line Termination (OLT)
can afford to wait from the moment it decides to wake up an
Optical Network Unit (ONU) in the low-power state of the
watchful sleep mode until the ONU is fully operational,
specified as a count of 125 microsecond PHY frames.";
          reference
            "ITU-T G.988 clause 9.1.14";

        }

        leaf iaware {
          type uint32;
          units "125 microsecond PHY frames";
          description
            "The Iaware attribute specifies the time the Optical Network
Unit (ONU) spends in its aware state, as a count of 125
microsecond PHY frames, before it re-enters asleep or
listen states. Local or remote events may independently
cause the ONU to enter an active state rather than
returning to a sleep state.";
          reference
            "ITU-T G.988 clause 9.1.14";

        }

        leaf ihold {
          type uint16;
          units "125 microsecond PHY frames";
          description
            "The Ihold attribute specifies the minimum time during which
the Optical Network Unit (ONU) remains in the active held
state, as a count of 125 microsecond PHY frames.";
          reference
            "ITU-T G.988 clause 9.1.14";

        }

        leaf idoze {
          type uint32;
          units "125 microsecond PHY frames";
          description
            "Maximum sleep interval in doze mode, specified in units of
125 microsecond PHY frames.

This parameter must be set to a value greater than 0 if
Optical Network Unit (ONU) supports doze mode.";
          reference
            "ITU-T G.988 clause 9.1.14";

        }

        leaf icyclic-sleep {
          type uint32;
          units "125 microsecond PHY frames";
          default "0";
          description
            "Maximum sleep interval in cyclic-sleep mode, specified in
units of 125 microsecond PHY frames.

Local or remote events may cause the Optical Network Unit
(ONU) to leave this state. This parameter must be set to a
value greater than 0 if ONU supports cyclic sleep mode.";
          reference
            "ITU-T G.988 clause 9.1.14";

        }
      }  // list power-management-profile
    }  // container xponani-power-management-profiles
  }  // module bbf-xponani-power-management