This module contains a collection of YANG definitions for supporting the Broadband Forum requirements on management of ITU-T Pas...
Version: 2023-06-21
module bbf-xpon-burst-profiles { yang-version 1.1; namespace "urn:bbf:yang:bbf-xpon-burst-profiles"; prefix bbf-xpon-burst-prof; import ietf-interfaces { prefix if; } import bbf-xpon { prefix bbf-xpon; } import bbf-xponvani { prefix bbf-xponvani; } organization "Broadband Forum <https://www.broadband-forum.org> Fiber Access Networks Work Area"; contact "Comments or questions about this Broadband Forum YANG module should be directed to <mailto:info@broadband-forum.org>. Editor: Robert Peschi, Nokia Editor: Kevin Noll, Vecima PS Leader: Joey Boyd, Adtran WA Director: Marta Seda, Calix"; description "This module contains a collection of YANG definitions for supporting the Broadband Forum requirements on management of ITU-T Passive Optical Network (PON) interfaces as defined in ITU-T G.984.x, G.987.x, ITU-T G.989.x and ITU-T G.9807.x. As such, this module is specific to access network equipment (e.g., BBF-specified Access Nodes and FTTdp DPUs). Specifically, this module provides management of burst profiles. Copyright (c) 2018-2023, Broadband Forum Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. 3. Neither the name of the copyright holder nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS \"AS IS\" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. The above license is used as a license under copyright only. Please reference the Forum IPR Policy for patent licensing terms <https://www.broadband-forum.org/ipr-policy>. Any moral rights which are necessary to exercise under the above license grant are also deemed granted under this license. This version of this YANG module is part of TR-385i2a1; see the TR itself for full legal notices."; revision "2023-06-21" { description "Issue 2 Amendment 1. * Approval Date: 2023-06-21. * Publication Date: 2023-06-21."; reference "TR-385i2a1: ITU-T PON YANG Modules <https://www.broadband-forum.org/technical/download/ TR-385_Issue-2_Amendment-1.pdf>"; } feature configurable-burst-profile { description "Indicates support for the upstream burst profile configuration."; } grouping burst-profile-configuration-data { description "Configuration data data for an upstream burst profiles."; list burst-profile { key "profile-id"; description "The list of burst profiles."; leaf profile-id { type uint8 { range "0..3"; } description "Burst profile ID."; reference "ITU-T G.987.3 clauses 8.1.2.6 and 11.3.3 ITU-T G.9807.1 clauses C.8.1.1.2.6 and C.11.3.3.1 ITU-T G.989.3 clauses 8.1.1.2.6 and 11.3.3.1"; } leaf profile-version { type uint8 { range "0..15"; } default "0"; description "Burst profile version."; reference "ITU-T G.987.3 clause 11.3.3 ITU-T G.9807.1 clause C.11.3.3.1 ITU-T G.9809.3 clause 11.3.3.1"; } leaf delimiter { type string { pattern '([a-fA-F0-9][a-fA-F0-9]){0,8}'; } description "Delimiter pattern. A string representing 0-8 octets whereas each octet is represented as 2 hexadecimal ASCII characters."; reference "ITU-T G.987.3 clause 11.3.3 ITU-T G.9807.1 clause C.11.3.3.1 ITU-T G.9809.3 clause 11.3.3.1"; } leaf preamble { type string { pattern '([a-fA-F0-9][a-fA-F0-9]){0,8}'; } description "Preamble pattern. A string representing 0-8 octets whereas each octet is represented as 2 hexadecimal ASCII characters."; reference "ITU-T G.987.3 clause 11.3.3 ITU-T G.9807.1 clause C.11.3.3.1 ITU-T G.9809.3 clause 11.3.3.1"; } leaf preamble-repeat-count { type uint8; default "1"; description "Number of times the preamble is transmitted. The value 0 specifies that no preamble is transmitted. This leaf is used only for XGS-PON (ITU-T G.9807.1) and NGPON2 (ITU-T G.989.3) channel terminations. It is ignored for GPON (ITU-T G.984.3) channel terminations."; reference "ITU-T G.9807.1 clause C.11.3.3.1 ITU-T G.9809.3 clause 11.3.3.1"; } } // list burst-profile } // grouping burst-profile-configuration-data augment /if:interfaces/if:interface/bbf-xpon:channel-termination { description "Augment an xPON channel termination configuration with data nodes related to upstream burst profile."; container burst-profiles { if-feature bbf-xpon-burst-prof:configurable-burst-profile; description "Upstream burst profile configuration. Burst profiles in the burst-profile list are broadcast to all ONUs connected to the channel-termination."; uses bbf-xpon-burst-prof:burst-profile-configuration-data; leaf ranging-burst-profile-id { if-feature bbf-xpon-burst-prof:configurable-burst-profile; type uint8 { range "0..3"; } description "Burst profile ID for ranging time allocations."; reference "ITU-T G.987.3 clause 8.1.2.6 ITU-T G.9807.1 clause C.8.1.1.2.6 ITU-T G.989.3 clauses 8.1.1.2.6"; } } // container burst-profiles } augment /if:interfaces/if:interface/bbf-xponvani:v-ani { description "Augment an xPON virtual Access Network Interface (vANI), i.e., an Optical Network Unit (ONU) as seen by the Optical Line Termination (OLT), with data nodes related to upstream burst profile."; container burst-profiles { if-feature bbf-xpon-burst-prof:configurable-burst-profile; description "Upstream burst profile configuration. Burst profiles in the burst-profile list are transmitted only to the ONU associated with the v-ani."; uses bbf-xpon-burst-prof:burst-profile-configuration-data; leaf data-burst-profile-id { if-feature bbf-xpon-burst-prof:configurable-burst-profile; type uint8 { range "0..3"; } description "Burst profile ID for data allocations."; reference "ITU-T G.987.3 clause 8.1.2.6 ITU-T G.9807.1 clause C.8.1.1.2.6 ITU-T G.989.3 clauses 8.1.1.2.6"; } } // container burst-profiles } } // module bbf-xpon-burst-profiles
© 2023 YumaWorks, Inc. All rights reserved.