bbf-fast

This module contains a collection of YANG definitions for supporting the Broadband Forum requirements on management of FAST inte...

Typedef Base type Abstract
channel-threshold-profile-ref leafref Used to reference a channel threshold profile.
channel-threshold-profile-ref leafref Used to reference a channel threshold profile.
channel-threshold-profile-ref leafref Used to reference a channel threshold profile.
downstream-data-rate-profile-ref leafref Used to reference a downstream data rate profile.
downstream-data-rate-profile-ref leafref Used to reference a downstream data rate profile.
downstream-data-rate-profile-ref leafref Used to reference a downstream data rate profile.
far-end-test-groups bits A set of bits representing each of the far end test groups.
far-end-test-groups bits A set of bits representing each of the far end test groups.
far-end-test-groups bits A set of bits representing each of the far end test groups.
fast-rate-adaptation-profile-ref leafref Used to reference a fast rate adaptation profile.
fast-rate-adaptation-profile-ref leafref Used to reference a fast rate adaptation profile.
fast-rate-adaptation-profile-ref leafref Used to reference a fast rate adaptation profile.
fast-retrain-policy-profile-ref leafref Used to reference a fast retrain policy profile.
fast-retrain-policy-profile-ref leafref Used to reference a fast retrain policy profile.
fast-retrain-policy-profile-ref leafref Used to reference a fast retrain policy profile.
line-threshold-profile-ref leafref Used to reference a line threshold profile.
line-threshold-profile-ref leafref Used to reference a line threshold profile.
line-threshold-profile-ref leafref Used to reference a line threshold profile.
low-power-data-rate-profile-ref leafref Used to reference a low power data rate profile.
low-power-data-rate-profile-ref leafref Used to reference a low power data rate profile.
low-power-data-rate-profile-ref leafref Used to reference a low power data rate profile.
near-end-test-groups bits A set of bits representing each of the near end test groups.
near-end-test-groups bits A set of bits representing each of the near end test groups.
near-end-test-groups bits A set of bits representing each of the near end test groups.
noise-margin-profile-ref leafref Used to reference a noise margin profile.
noise-margin-profile-ref leafref Used to reference a noise margin profile.
noise-margin-profile-ref leafref Used to reference a noise margin profile.
performance-15min-history-interval uint8 Defines the range of 15 minutes intervals and defines the position of the interval relative to the current interval where 1 is the most recent interval.
performance-15min-history-interval uint8 Defines the range of 15 minutes intervals and defines the position of the interval relative to the current interval where 1 is the most recent interval.
performance-15min-history-interval uint8 Defines the range of 15 minutes intervals and defines the position of the interval relative to the current interval where 1 is the most recent interval.
performance-15min-interval uint8 Defines the range of 15 minute intervals.
performance-15min-interval uint8 Defines the range of 15 minute intervals.
performance-15min-interval uint8 Defines the range of 15 minute intervals.
performance-24hr-history-interval uint8 Defines the range of 24 hour intervals and defines the position of the interval relative to the current interval where 1 is the most recent interval.
performance-24hr-history-interval uint8 Defines the range of 24 hour intervals and defines the position of the interval relative to the current interval where 1 is the most recent interval.
performance-24hr-history-interval uint8 Defines the range of 24 hour intervals and defines the position of the interval relative to the current interval where 1 is the most recent interval.
performance-24hr-interval uint8 Defines the range of 24 hour intervals.
performance-24hr-interval uint8 Defines the range of 24 hour intervals.
performance-24hr-interval uint8 Defines the range of 24 hour intervals.
per-sub-carrier-group-uint16 binary A binary type where each pair of octets represents data belonging to a sub-carrier. The first two octets represents sub-carrier 0. In each pair of octets, the most significant byte is loaded first.
per-sub-carrier-group-uint16 binary A binary type where each pair of octets represents data belonging to a sub-carrier. The first two octets represents sub-carrier 0. In each pair of octets, the most significant byte is loaded first.
per-sub-carrier-group-uint16 binary A binary type where each pair of octets represents data belonging to a sub-carrier. The first two octets represents sub-carrier 0. In each pair of octets, the most significant byte is loaded first.
per-sub-carrier-group-uint8 binary A binary type where each octet represents data belonging to a sub-carrier group. The first octet represents sub-carrier group 0.
per-sub-carrier-group-uint8 binary A binary type where each octet represents data belonging to a sub-carrier group. The first octet represents sub-carrier group 0.
per-sub-carrier-group-uint8 binary A binary type where each octet represents data belonging to a sub-carrier group. The first octet represents sub-carrier group 0.
per-sub-carrier-nibble binary A binary type where each nibble represents data belonging to a sub-carrier. The first nibble represents sub-carrier 0 and the last represents sub-carrier 4095.
per-sub-carrier-nibble binary A binary type where each nibble represents data belonging to a sub-carrier. The first nibble represents sub-carrier 0 and the last represents sub-carrier 4095.
per-sub-carrier-nibble binary A binary type where each nibble represents data belonging to a sub-carrier. The first nibble represents sub-carrier 0 and the last represents sub-carrier 4095.
per-sub-carrier-uint8 binary A binary type where each octet represents data belonging to a sub-carrier. The first octet represents sub-carrier 0 and the last represents sub-carrier 4095.
per-sub-carrier-uint8 binary A binary type where each octet represents data belonging to a sub-carrier. The first octet represents sub-carrier 0 and the last represents sub-carrier 4095.
per-sub-carrier-uint8 binary A binary type where each octet represents data belonging to a sub-carrier. The first octet represents sub-carrier 0 and the last represents sub-carrier 4095.
profiles bits Identifies supported FAST profiles.
profiles bits Identifies supported FAST profiles.
profiles bits Identifies supported FAST profiles.
psd-level uint8 Defines a Power Spectral Density (PSD) level in the range 0 to -127.5 dBm/Hz.
psd-level uint8 Defines a Power Spectral Density (PSD) level in the range 0 to -127.5 dBm/Hz.
psd-level uint8 Defines a Power Spectral Density (PSD) level in the range 0 to -127.5 dBm/Hz.
psd-level-sub-carrier-index uint32 Identifies a sub-carrier used for Power Spectral Density (PSD) level configuration.
psd-level-sub-carrier-index uint32 Identifies a sub-carrier used for Power Spectral Density (PSD) level configuration.
psd-level-sub-carrier-index uint32 Identifies a sub-carrier used for Power Spectral Density (PSD) level configuration.
retransmission-profile-ref leafref Used to reference a retransmission profile.
retransmission-profile-ref leafref Used to reference a retransmission profile.
retransmission-profile-ref leafref Used to reference a retransmission profile.
seconds-counter-15min uint32 A performance counter which counts the number of seconds an event has occurred during a 15 minute interval.
seconds-counter-15min uint32 A performance counter which counts the number of seconds an event has occurred during a 15 minute interval.
seconds-counter-15min uint32 A performance counter which counts the number of seconds an event has occurred during a 15 minute interval.
seconds-counter-24hr uint32 A performance counter which counts the number of seconds an event has occurred during a 24 hour interval.
seconds-counter-24hr uint32 A performance counter which counts the number of seconds an event has occurred during a 24 hour interval.
seconds-counter-24hr uint32 A performance counter which counts the number of seconds an event has occurred during a 24 hour interval.
snr-margin union Reports the signal-to-noise ratio margin. A first special value (undetermined) indicates that the signal-to-noise ratio margin is undetermined. A second special value (-511) indicates that the signal-to-noise ratio margin is less than or equal to -51.1 dB. A third special value (+511) indicates that the signal-to-noise ratio margin is greater than or equal to +51.1 dB.
snr-margin union Reports the signal-to-noise ratio margin. A first special value (undetermined) indicates that the signal-to-noise ratio margin is undetermined. A second special value (-511) indicates that the signal-to-noise ratio margin is less than or equal to -51.1 dB. A third special value (+511) indicates that the signal-to-noise ratio margin is greater than or equal to +51.1 dB.
snr-margin union Reports the signal-to-noise ratio margin. A first special value (undetermined) indicates that the signal-to-noise ratio margin is undetermined. A second special value (-511) indicates that the signal-to-noise ratio margin is less than or equal to -51.1 dB. A third special value (+511) indicates that the signal-to-noise ratio margin is greater than or equal to +51.1dB.
sub-carrier-group-index uint16 Identifies a sub-carrier group.
sub-carrier-group-index uint16 Identifies a sub-carrier group.
sub-carrier-group-index uint16 Identifies a sub-carrier group.
sub-carrier-group-size uint8 Reports the number of sub-carriers in any one sub-carrier group.
sub-carrier-group-size uint8 Reports the number of sub-carriers in any one sub-carrier group.
sub-carrier-group-size uint8 Reports the number of sub-carriers in any one sub-carrier group.
sub-carrier-index uint16 Identifies a sub-carrier.
sub-carrier-index uint16 Identifies a sub-carrier.
sub-carrier-index uint16 Identifies a sub-carrier.
time-division-duplexing-profile-ref leafref Used to reference a Time Division Duplexing (TDD) profile.
time-division-duplexing-profile-ref leafref Used to reference a Time Division Duplexing (TDD) profile.
time-division-duplexing-profile-ref leafref Used to reference a Time Division Duplexing (TDD) profile.
time-stamp-or-undefined union The date/time associated with a particular time stamp. The special value, 'undefined', is used when the event represented by the time stamp has not yet occurred.
time-stamp-or-undefined union The date/time associated with a particular time stamp. The special value, 'undefined', is used when the event represented by the time stamp has not yet occurred.
time-stamp-or-undefined union The date/time associated with a particular time stamp. The special value, 'undefined', is used when the event represented by the time stamp has not yet occurred.
upstream-data-rate-profile-ref leafref Used to reference an upstream data rate profile.
upstream-data-rate-profile-ref leafref Used to reference an upstream data rate profile.
upstream-data-rate-profile-ref leafref Used to reference an upstream data rate profile.
vce-port-index union For the line in a vectored group, the Vectoring Control Entity (VCE) port index is the physical index that uniquely identifies the VCE port to which the line is connected. It is an integer from 1 to the maximum number of lines supported by the VCE.
vce-port-index union For the line in a vectored group, the Vectoring Control Entity (VCE) port index is the physical index that uniquely identifies the VCE port to which the line is connected. It is an integer from 1 to the maximum number of lines supported by the VCE.
vce-port-index union For the line in a vectored group, the Vectoring Control Entity (VCE) port index is the physical index that uniquely identifies the VCE port to which the line is connected. It is an integer from 1 to the maximum number of lines supported by the VCE.
vectoring-profile-ref leafref Used to reference a vectoring profile.
vectoring-profile-ref leafref Used to reference a vectoring profile.
vectoring-profile-ref leafref Used to reference a vectoring profile.

© 2024 YumaWorks, Inc. All rights reserved.