POWER-ETHERNET-MIB

Organization:

IETF Ethernet Interfaces and Hub MIB Working Group

Module:

POWER-ETHERNET-MIB

Version:

2003-11-24

File:

POWER-ETHERNET-MIB.yang

Abstract:

The MIB module for managing Power Source Equipment (PSE) working according to the IEEE 802.af Powered Ethernet (DTE Power via MD...

Contact:

WG Charter:
http://www.ietf.org/html.charters/hubmib-charter.html

Mailing lists:
General Discussion: hubmib@ietf.org
To Subscribe: hubmib-requests@ietf.org
In Body: subscribe your_email_address

Chair: Dan Romascanu
Avaya
Tel: +972-3-645-8414
Email: dromasca@avaya.com

Editor: Avi Berger
PowerDsine Inc.
Tel: 972-9-7755100 Ext 307
Fax: 972-9-7755120
E-mail: avib@PowerDsine.com

Check for an additional details:

YANG Catalog

Description:

The MIB module for managing Power Source Equipment
(PSE) working according to the IEEE 802.af Powered
Ethernet (DTE Power via MDI) standard.

The following terms are used throughout this
MIB module. For complete formal definitions,
the IEEE 802.3 standards should be consulted
wherever possible:

Group - A recommended, but optional, entity
defined by the IEEE 802.3 management standard,
in order to support a modular numbering scheme.
The classical example allows an implementor to
represent field-replaceable units as groups of
ports, with the port numbering matching the
modular hardware implementation.

Port - This entity identifies the port within the group
for which this entry contains information. The numbering
scheme for ports is implementation specific.

Copyright (c) The Internet Society (2003). This version
of this MIB module is part of RFC 3621; See the RFC
itself for full legal notices.