NetconfCentral:

Typedef	Base type	Abstract
BitRate	int32	The rate, in bits/second, that data may move in the context. Applicable contexts minimally include the speed of an interface or virtual circuit, the data rate of a (potentially aggre- gated) data flow, or the data rate to be allo- cated for use by a flow.
BurstSize	int32	The number of octets of IP Data, including IP Headers, that a stream may send without concern for policing.
MessageSize	int32	The size of a message in bytes. This is used to specify the minimum and maximum size of a message along an integrated services route.
Port	binary	The value of the UDP or TCP Source or Destina- tion Port field, a virtual destination port or generalized port identifier used with the IPSEC Authentication Header or Encapsulating Security Payload, or other session discriminator. If it is not used, the value should be of length 0. This pair, when coupled with the IP Addresses of the source and destination system and the IP protocol field, uniquely identifies a data stream.
Protocol	int32	The value of the IP Protocol field of an IP Datagram Header. This identifies the protocol layer above IP. For example, the value 6 is used for TCP and the value 17 is used for UDP. The values of this field are defined in the As- signed Numbers RFC.
QosService	enumeration	The class of service in use by a flow.
SessionNumber	int32	The Session Number convention is used for numbers identifying sessions or saved PATH or RESV information. It is a number in the range returned by a TestAndIncr variable, having no protocol meaning whatsoever but serving instead as simple identifier. The alternative was a very complex instance or instance object that became unwieldy.
SessionType	int32	The value of the C-Type field of a Session ob- ject, as defined in the RSVP specification. This value determines the lengths of octet strings and use of certain objects such as the 'port' variables. If the C-Type calls for an IP6 address, one would expect all source, des- tination, and next/previous hop addresses to be 16 bytes long, and for the ports to be UDP/TCP port numbers, for example.

BitRate

int32

The rate, in bits/second, that data may move in the context. Applicable contexts minimally include the speed of an interface or virtual circuit, the data rate of a (potentially aggre- gated) data flow, or the data rate to be allo- cated for use by a flow.

BurstSize

int32

The number of octets of IP Data, including IP Headers, that a stream may send without concern for policing.

MessageSize

int32

The size of a message in bytes. This is used to specify the minimum and maximum size of a message along an integrated services route.

Port

binary

The value of the UDP or TCP Source or Destina- tion Port field, a virtual destination port or generalized port identifier used with the IPSEC Authentication Header or Encapsulating Security Payload, or other session discriminator. If it is not used, the value should be of length 0. This pair, when coupled with the IP Addresses of the source and destination system and the IP protocol field, uniquely identifies a data stream.

Protocol

int32

The value of the IP Protocol field of an IP Datagram Header. This identifies the protocol layer above IP. For example, the value 6 is used for TCP and the value 17 is used for UDP. The values of this field are defined in the As- signed Numbers RFC.

QosService

enumeration

The class of service in use by a flow.

SessionNumber

int32

The Session Number convention is used for numbers identifying sessions or saved PATH or RESV information. It is a number in the range returned by a TestAndIncr variable, having no protocol meaning whatsoever but serving instead as simple identifier. The alternative was a very complex instance or instance object that became unwieldy.

SessionType

int32

The value of the C-Type field of a Session ob- ject, as defined in the RSVP specification. This value determines the lengths of octet strings and use of certain objects such as the 'port' variables. If the C-Type calls for an IP6 address, one would expect all source, des- tination, and next/previous hop addresses to be 16 bytes long, and for the ports to be UDP/TCP port numbers, for example.

INT-SERV-MIB