module DISMAN-EVENT-MIB {

    yang-version 1;

    namespace
      "urn:ietf:params:xml:ns:yang:smiv2:DISMAN-EVENT-MIB";

    prefix DISMAN-EVENT-MIB;

    import SNMP-FRAMEWORK-MIB {
      prefix snmp-framework;
    }
    import SNMP-TARGET-MIB {
      prefix snmp-target;
    }
    import SNMPv2-TC {
      prefix snmpv2-tc;
    }
    import ietf-yang-smiv2 {
      prefix smiv2;
    }
    import ietf-yang-types {
      prefix yang;
    }

    organization
      "IETF Distributed Management Working Group";

    contact
      "Ramanathan Kavasseri
    Cisco Systems, Inc.
    170 West Tasman Drive,
    San Jose CA 95134-1706.
    Phone: +1 408 526 4527
    Email: ramk@cisco.com";

    description
      "The MIB module for defining event triggers and actions
    for network management purposes.";

    revision "2000-10-16" {
      description
        "This is the initial version of this MIB.
      Published as RFC 2981";
    }

    smiv2:alias "sysUpTimeInstance" {
      smiv2:oid "1.3.6.1.2.1.1.3.0";
    }
    smiv2:alias "dismanEventMIB" {
      smiv2:oid "1.3.6.1.2.1.88";
    }
    smiv2:alias "dismanEventMIBObjects" {
      smiv2:oid "1.3.6.1.2.1.88.1";
    }
    smiv2:alias "mteResource" {
      smiv2:oid "1.3.6.1.2.1.88.1.1";
    }
    smiv2:alias "mteTrigger" {
      smiv2:oid "1.3.6.1.2.1.88.1.2";
    }
    smiv2:alias "mteObjects" {
      smiv2:oid "1.3.6.1.2.1.88.1.3";
    }
    smiv2:alias "mteEvent" {
      smiv2:oid "1.3.6.1.2.1.88.1.4";
    }
    smiv2:alias "dismanEventMIBNotificationPrefix" {
      smiv2:oid "1.3.6.1.2.1.88.2";
    }
    smiv2:alias "dismanEventMIBNotifications" {
      smiv2:oid "1.3.6.1.2.1.88.2.0";
    }
    smiv2:alias "dismanEventMIBNotificationObjects" {
      smiv2:oid "1.3.6.1.2.1.88.2.1";
    }
    smiv2:alias "dismanEventMIBConformance" {
      smiv2:oid "1.3.6.1.2.1.88.3";
    }
    smiv2:alias "dismanEventMIBCompliances" {
      smiv2:oid "1.3.6.1.2.1.88.3.1";
    }
    smiv2:alias "dismanEventMIBGroups" {
      smiv2:oid "1.3.6.1.2.1.88.3.2";
    }

    typedef FailureReason {
      type enumeration {
        enum "sampleOverrun" {
          value -6;
        }
        enum "badType" {
          value -5;
        }
        enum "noResponse" {
          value -4;
        }
        enum "destinationUnreachable" {
          value -3;
        }
        enum "badDestination" {
          value -2;
        }
        enum "localResourceLack" {
          value -1;
        }
        enum "noError" {
          value 0;
        }
        enum "tooBig" {
          value 1;
        }
        enum "noSuchName" {
          value 2;
        }
        enum "badValue" {
          value 3;
        }
        enum "readOnly" {
          value 4;
        }
        enum "genErr" {
          value 5;
        }
        enum "noAccess" {
          value 6;
        }
        enum "wrongType" {
          value 7;
        }
        enum "wrongLength" {
          value 8;
        }
        enum "wrongEncoding" {
          value 9;
        }
        enum "wrongValue" {
          value 10;
        }
        enum "noCreation" {
          value 11;
        }
        enum "inconsistentValue" {
          value 12;
        }
        enum "resourceUnavailable" {
          value 13;
        }
        enum "commitFailed" {
          value 14;
        }
        enum "undoFailed" {
          value 15;
        }
        enum "authorizationError" {
          value 16;
        }
        enum "notWritable" {
          value 17;
        }
        enum "inconsistentName" {
          value 18;
        }
      }
      description
        "Reasons for failures in an attempt to perform a management
      request.
      
      The first group of errors, numbered less than 0, are related
      to problems in sending the request.  The existence of a
      particular error code here does not imply that all
      implementations are capable of sensing that error and
      
      returning that code.
      
      The second group, numbered greater than 0, are copied
      directly from SNMP protocol operations and are intended to
      carry exactly the meanings defined for the protocol as returned
      in an SNMP response.
      
      localResourceLack       some local resource such as memory
                              lacking or
                              mteResourceSampleInstanceMaximum
                              exceeded
      badDestination          unrecognized domain name or otherwise
                              invalid destination address
      destinationUnreachable  can't get to destination address
      noResponse              no response to SNMP request
      badType                 the data syntax of a retrieved object
                              as not as expected
      sampleOverrun           another sample attempt occurred before
                              the previous one completed";
    }

    container DISMAN-EVENT-MIB {
      config false;
      container mteResource {
        smiv2:oid "1.3.6.1.2.1.88.1.1";
        leaf mteResourceSampleMinimum {
          smiv2:max-access "read-write";
          smiv2:oid "1.3.6.1.2.1.88.1.1.1";
          type int32 {
            range "1..2147483647";
          }
          units "seconds";
          description
            "The minimum mteTriggerFrequency this system will
          accept.  A system may use the larger values of this minimum to
          lessen the impact of constant sampling.  For larger
          sampling intervals the system samples less often and
          suffers less overhead.  This object provides a way to enforce
          such lower overhead for all triggers created after it is
          set.
          
          Unless explicitly resource limited, a system's value for
          this object SHOULD be 1, allowing as small as a 1 second
          interval for ongoing trigger sampling.
          
          Changing this value will not invalidate an existing setting
          of mteTriggerFrequency.";
        }

        leaf mteResourceSampleInstanceMaximum {
          smiv2:max-access "read-write";
          smiv2:oid "1.3.6.1.2.1.88.1.1.2";
          type uint32;
          units "instances";
          description
            "The maximum number of instance entries this system will
          support for sampling.
          
          These are the entries that maintain state, one for each
          instance of each sampled object as selected by
          mteTriggerValueID.  Note that wildcarded objects result
          in multiple instances of this state.
          
          A value of 0 indicates no preset limit, that is, the limit
          is dynamic based on system operation and resources.
          
          Unless explicitly resource limited, a system's value for
          this object SHOULD be 0.
          
          Changing this value will not eliminate or inhibit existing
          sample state but could prevent allocation of additional state
          information.";
        }

        leaf mteResourceSampleInstances {
          smiv2:max-access "read-only";
          smiv2:oid "1.3.6.1.2.1.88.1.1.3";
          type yang:gauge32;
          units "instances";
          description
            "The number of currently active instance entries as
          defined for mteResourceSampleInstanceMaximum.";
        }

        leaf mteResourceSampleInstancesHigh {
          smiv2:max-access "read-only";
          smiv2:oid "1.3.6.1.2.1.88.1.1.4";
          type yang:gauge32;
          units "instances";
          description
            "The highest value of mteResourceSampleInstances that has
          occurred since initialization of the management system.";
        }

        leaf mteResourceSampleInstanceLacks {
          smiv2:max-access "read-only";
          smiv2:oid "1.3.6.1.2.1.88.1.1.5";
          type yang:counter32;
          units "instances";
          description
            "The number of times this system could not take a new sample
          because that allocation would have exceeded the limit set by
          mteResourceSampleInstanceMaximum.";
        }
      }  // container mteResource

      container mteTrigger {
        smiv2:oid "1.3.6.1.2.1.88.1.2";
        leaf mteTriggerFailures {
          smiv2:max-access "read-only";
          smiv2:oid "1.3.6.1.2.1.88.1.2.1";
          type yang:counter32;
          units "failures";
          description
            "The number of times an attempt to check for a trigger
          condition has failed.  This counts individually for each
          attempt in a group of targets or each attempt for a
          
          wildcarded object.";
        }
      }  // container mteTrigger

      container mteEvent {
        smiv2:oid "1.3.6.1.2.1.88.1.4";
        leaf mteEventFailures {
          smiv2:max-access "read-only";
          smiv2:oid "1.3.6.1.2.1.88.1.4.1";
          type yang:counter32;
          description
            "The number of times an attempt to invoke an event
          has failed.  This counts individually for each
          attempt in a group of targets or each attempt for a
          wildcarded trigger object.";
        }
      }  // container mteEvent

      container mteTriggerTable {
        smiv2:oid "1.3.6.1.2.1.88.1.2.2";
        description
          "A table of management event trigger information.";
        list mteTriggerEntry {
          smiv2:implied "mteTriggerName";
          smiv2:oid "1.3.6.1.2.1.88.1.2.2.1";
          key "mteOwner mteTriggerName";
          description
            "Information about a single trigger.  Applications create and
          delete entries using mteTriggerEntryStatus.";
          leaf mteOwner {
            smiv2:max-access "not-accessible";
            smiv2:oid "1.3.6.1.2.1.88.1.2.2.1.1";
            type snmp-framework:SnmpAdminString {
              length "0..32";
            }
            description
              "The owner of this entry. The exact semantics of this
            string are subject to the security policy defined by the
            security administrator.";
          }

          leaf mteTriggerName {
            smiv2:max-access "not-accessible";
            smiv2:oid "1.3.6.1.2.1.88.1.2.2.1.2";
            type snmp-framework:SnmpAdminString {
              length "1..32";
            }
            description
              "A locally-unique, administratively assigned name for the
            trigger within the scope of mteOwner.";
          }

          leaf mteTriggerComment {
            smiv2:defval "";
            smiv2:max-access "read-write";
            smiv2:oid "1.3.6.1.2.1.88.1.2.2.1.3";
            type snmp-framework:SnmpAdminString;
            description
              "A description of the trigger's function and use.";
          }

          leaf mteTriggerTest {
            smiv2:defval "{boolean}";
            smiv2:max-access "read-write";
            smiv2:oid "1.3.6.1.2.1.88.1.2.2.1.4";
            type bits {
              bit existence {
                position 0;
              }
              bit boolean {
                position 1;
              }
              bit threshold {
                position 2;
              }
            }
            description
              "The type of trigger test to perform.  For 'boolean' and
            'threshold'  tests, the object at mteTriggerValueID MUST
            evaluate to an integer, that is, anything that ends up encoded
            for transmission (that is, in BER, not ASN.1) as an integer.
            
            For 'existence', the specific test is as selected by
            mteTriggerExistenceTest.  When an object appears, vanishes
            or changes value, the trigger fires. If the object's
            appearance caused the trigger firing, the object MUST
            vanish before the trigger can be fired again for it, and
            vice versa. If the trigger fired due to a change in the
            object's value, it will be fired again on every successive
            value change for that object.
            
            For 'boolean', the specific test is as selected by
            mteTriggerBooleanTest.  If the test result is true the trigger
            fires.  The trigger will not fire again until the value has
            become false and come back to true.
            
            For 'threshold' the test works as described below for
            
            mteTriggerThresholdStartup, mteTriggerThresholdRising, and
            mteTriggerThresholdFalling.
            
            Note that combining 'boolean' and 'threshold' tests on the
            same object may be somewhat redundant.";
          }

          leaf mteTriggerSampleType {
            smiv2:defval "absoluteValue";
            smiv2:max-access "read-write";
            smiv2:oid "1.3.6.1.2.1.88.1.2.2.1.5";
            type enumeration {
              enum "absoluteValue" {
                value 1;
              }
              enum "deltaValue" {
                value 2;
              }
            }
            description
              "The type of sampling to perform.
            
            An 'absoluteValue' sample requires only a single sample to be
            meaningful, and is exactly the value of the object at
            mteTriggerValueID at the sample time.
            
            A 'deltaValue' requires two samples to be meaningful and is
            thus not available for testing until the second and subsequent
            samples after the object at mteTriggerValueID is first found
            to exist.  It is the difference between the two samples.  For
            unsigned values it is always positive, based on unsigned
            arithmetic.  For signed values it can be positive or negative.
            
            For SNMP counters to be meaningful they should be sampled as a
            'deltaValue'.
            
            For 'deltaValue' mteTriggerDeltaTable contains further
            parameters.
            
            If only 'existence' is set in mteTriggerTest this object has
            no meaning.";
          }

          leaf mteTriggerValueID {
            smiv2:defval "zeroDotZero";
            smiv2:max-access "read-write";
            smiv2:oid "1.3.6.1.2.1.88.1.2.2.1.6";
            type yang:object-identifier-128;
            description
              "The object identifier of the MIB object to sample to see
            if the trigger should fire.
            
            This may be wildcarded by truncating all or part of the
            instance portion, in which case the value is obtained
            as if with a GetNext function, checking multiple values
            
            if they exist.  If such wildcarding is applied,
            mteTriggerValueIDWildcard must be 'true' and if not it must
            be 'false'.
            
            Bad object identifiers or a mismatch between truncating the
            identifier and the value of mteTriggerValueIDWildcard result
            in operation as one would expect when providing the wrong
            identifier to a Get or GetNext operation.  The Get will fail
            or get the wrong object.  The GetNext will indeed get whatever
            is next, proceeding until it runs past the initial part of the
            identifier and perhaps many unintended objects for confusing
            results.  If the value syntax of those objects is not usable,
            that results in a 'badType' error that terminates the scan.
            
            Each instance that fills the wildcard is independent of any
            additional instances, that is, wildcarded objects operate
            as if there were a separate table entry for each instance
            that fills the wildcard without having to actually predict
            all possible instances ahead of time.";
          }

          leaf mteTriggerValueIDWildcard {
            smiv2:defval "false";
            smiv2:max-access "read-write";
            smiv2:oid "1.3.6.1.2.1.88.1.2.2.1.7";
            type boolean;
            description
              "Control for whether mteTriggerValueID is to be treated as
            fully-specified or wildcarded, with 'true' indicating wildcard.";
          }

          leaf mteTriggerTargetTag {
            smiv2:defval "";
            smiv2:max-access "read-write";
            smiv2:oid "1.3.6.1.2.1.88.1.2.2.1.8";
            type snmp-target:SnmpTagValue;
            description
              "The tag for the target(s) from which to obtain the condition
            for a trigger check.
            
            A length of 0 indicates the local system.  In this case,
            access to the objects indicated by mteTriggerValueID is under
            the security credentials of the requester that set
            mteTriggerEntryStatus to 'active'.  Those credentials are the
            input parameters for isAccessAllowed from the Architecture for
            Describing SNMP Management Frameworks.
            
            Otherwise access rights are checked according to the security
            
            parameters resulting from the tag.";
          }

          leaf mteTriggerContextName {
            smiv2:defval "";
            smiv2:max-access "read-write";
            smiv2:oid "1.3.6.1.2.1.88.1.2.2.1.9";
            type snmp-framework:SnmpAdminString;
            description
              "The management context from which to obtain mteTriggerValueID.
            
            This may be wildcarded by leaving characters off the end.  For
            example use 'Repeater' to wildcard to 'Repeater1',
            'Repeater2', 'Repeater-999.87b', and so on.  To indicate such
            wildcarding is intended, mteTriggerContextNameWildcard must
            be 'true'.
            
            Each instance that fills the wildcard is independent of any
            additional instances, that is, wildcarded objects operate
            as if there were a separate table entry for each instance
            that fills the wildcard without having to actually predict
            all possible instances ahead of time.
            
            Operation of this feature assumes that the local system has a
            list of available contexts against which to apply the
            wildcard.  If the objects are being read from the local
            system, this is clearly the system's own list of contexts.
            For a remote system a local version of such a list is not
            defined by any current standard and may not be available, so
            this function MAY not be supported.";
          }

          leaf mteTriggerContextNameWildcard {
            smiv2:defval "false";
            smiv2:max-access "read-write";
            smiv2:oid "1.3.6.1.2.1.88.1.2.2.1.10";
            type boolean;
            description
              "Control for whether mteTriggerContextName is to be treated as
            fully-specified or wildcarded, with 'true' indicating wildcard.";
          }

          leaf mteTriggerFrequency {
            smiv2:defval "600";
            smiv2:max-access "read-write";
            smiv2:oid "1.3.6.1.2.1.88.1.2.2.1.11";
            type uint32;
            units "seconds";
            description
              "The number of seconds to wait between trigger samples.  To
            encourage consistency in sampling, the interval is measured
            from the beginning of one check to the beginning of the next
            and the timer is restarted immediately when it expires, not
            when the check completes.
            
            If the next sample begins before the previous one completed the
            system may either attempt to make the check or treat this as an
            error condition with the error 'sampleOverrun'.
            
            A frequency of 0 indicates instantaneous recognition of the
            condition.  This is not possible in many cases, but may
            be supported in cases where it makes sense and the system is
            able to do so.  This feature allows the MIB to be used in
            implementations where such interrupt-driven behavior is
            possible and is not likely to be supported for all MIB objects
            even then since such sampling generally has to be tightly
            integrated into low-level code.
            
            Systems that can support this SHOULD document those cases
            where it can be used.  In cases where it can not, setting this
            object to 0 should be disallowed.";
          }

          leaf mteTriggerObjectsOwner {
            smiv2:defval "";
            smiv2:max-access "read-write";
            smiv2:oid "1.3.6.1.2.1.88.1.2.2.1.12";
            type snmp-framework:SnmpAdminString {
              length "0..32";
            }
            description
              "To go with mteTriggerObjects, the mteOwner of a group of
            objects from mteObjectsTable.";
          }

          leaf mteTriggerObjects {
            smiv2:defval "";
            smiv2:max-access "read-write";
            smiv2:oid "1.3.6.1.2.1.88.1.2.2.1.13";
            type snmp-framework:SnmpAdminString {
              length "0..32";
            }
            description
              "The mteObjectsName of a group of objects from
            mteObjectsTable.  These objects are to be added to any
            Notification resulting from the firing of this trigger.
            
            A list of objects may also be added based on the event or on
            the value of mteTriggerTest.
            
            A length of 0 indicates no additional objects.";
          }

          leaf mteTriggerEnabled {
            smiv2:defval "false";
            smiv2:max-access "read-write";
            smiv2:oid "1.3.6.1.2.1.88.1.2.2.1.14";
            type boolean;
            description
              "A control to allow a trigger to be configured but not used.
            When the value is 'false' the trigger is not sampled.";
          }

          leaf mteTriggerEntryStatus {
            smiv2:max-access "read-write";
            smiv2:oid "1.3.6.1.2.1.88.1.2.2.1.15";
            type snmpv2-tc:RowStatus;
            description
              "The control that allows creation and deletion of entries.
            Once made active an entry may not be modified except to
            delete it.";
          }
        }  // list mteTriggerEntry
      }  // container mteTriggerTable

      container mteTriggerDeltaTable {
        smiv2:oid "1.3.6.1.2.1.88.1.2.3";
        description
          "A table of management event trigger information for delta
        sampling.";
        list mteTriggerDeltaEntry {
          smiv2:implied "mteTriggerName";
          smiv2:oid "1.3.6.1.2.1.88.1.2.3.1";
          key "mteOwner mteTriggerName";
          description
            "Information about a single trigger's delta sampling.  Entries
          automatically exist in this this table for each mteTriggerEntry
          that has mteTriggerSampleType set to 'deltaValue'.";
          leaf mteOwner {
            type leafref {
              path "/DISMAN-EVENT-MIB:DISMAN-EVENT-MIB/DISMAN-EVENT-MIB:mteTriggerTable/DISMAN-EVENT-MIB:mteTriggerEntry/DISMAN-EVENT-MIB:mteOwner";
            }
          }

          leaf mteTriggerName {
            type leafref {
              path "/DISMAN-EVENT-MIB:DISMAN-EVENT-MIB/DISMAN-EVENT-MIB:mteTriggerTable/DISMAN-EVENT-MIB:mteTriggerEntry/DISMAN-EVENT-MIB:mteTriggerName";
            }
          }

          leaf mteTriggerDeltaDiscontinuityID {
            smiv2:defval "sysUpTimeInstance";
            smiv2:max-access "read-write";
            smiv2:oid "1.3.6.1.2.1.88.1.2.3.1.1";
            type yang:object-identifier-128;
            description
              "The OBJECT IDENTIFIER (OID) of a TimeTicks, TimeStamp, or
            DateAndTime object that indicates a discontinuity in the value
            at mteTriggerValueID.
            
            The OID may be for a leaf object (e.g. sysUpTime.0) or may
            be wildcarded to match mteTriggerValueID.
            
            This object supports normal checking for a discontinuity in a
            counter.  Note that if this object does not point to sysUpTime
            discontinuity checking MUST still check sysUpTime for an overall
            discontinuity.
            
            If the object identified is not accessible the sample attempt
            is in error, with the error code as from an SNMP request.
            
            Bad object identifiers or a mismatch between truncating the
            identifier and the value of mteDeltaDiscontinuityIDWildcard
            result in operation as one would expect when providing the
            wrong identifier to a Get operation.  The Get will fail or get
            the wrong object.  If the value syntax of those objects is not
            usable, that results in an error that terminates the sample
            with a 'badType' error code.";
          }

          leaf mteTriggerDeltaDiscontinuityIDWildcard {
            smiv2:defval "false";
            smiv2:max-access "read-write";
            smiv2:oid "1.3.6.1.2.1.88.1.2.3.1.2";
            type boolean;
            description
              "Control for whether mteTriggerDeltaDiscontinuityID is to be
            treated as fully-specified or wildcarded, with 'true'
            indicating wildcard. Note that the value of this object will
            be the same as that of the corresponding instance of
            mteTriggerValueIDWildcard when the corresponding
            
            mteTriggerSampleType is 'deltaValue'.";
          }

          leaf mteTriggerDeltaDiscontinuityIDType {
            smiv2:defval "timeTicks";
            smiv2:max-access "read-write";
            smiv2:oid "1.3.6.1.2.1.88.1.2.3.1.3";
            type enumeration {
              enum "timeTicks" {
                value 1;
              }
              enum "timeStamp" {
                value 2;
              }
              enum "dateAndTime" {
                value 3;
              }
            }
            description
              "The value 'timeTicks' indicates the
            mteTriggerDeltaDiscontinuityID of this row is of syntax
            TimeTicks.  The value 'timeStamp' indicates syntax TimeStamp.
            The value 'dateAndTime' indicates syntax DateAndTime.";
          }
        }  // list mteTriggerDeltaEntry
      }  // container mteTriggerDeltaTable

      container mteTriggerExistenceTable {
        smiv2:oid "1.3.6.1.2.1.88.1.2.4";
        description
          "A table of management event trigger information for existence
        triggers.";
        list mteTriggerExistenceEntry {
          smiv2:implied "mteTriggerName";
          smiv2:oid "1.3.6.1.2.1.88.1.2.4.1";
          key "mteOwner mteTriggerName";
          description
            "Information about a single existence trigger.  Entries
          automatically exist in this this table for each mteTriggerEntry
          that has 'existence' set in mteTriggerTest.";
          leaf mteOwner {
            type leafref {
              path "/DISMAN-EVENT-MIB:DISMAN-EVENT-MIB/DISMAN-EVENT-MIB:mteTriggerTable/DISMAN-EVENT-MIB:mteTriggerEntry/DISMAN-EVENT-MIB:mteOwner";
            }
          }

          leaf mteTriggerName {
            type leafref {
              path "/DISMAN-EVENT-MIB:DISMAN-EVENT-MIB/DISMAN-EVENT-MIB:mteTriggerTable/DISMAN-EVENT-MIB:mteTriggerEntry/DISMAN-EVENT-MIB:mteTriggerName";
            }
          }

          leaf mteTriggerExistenceTest {
            smiv2:defval "{present, absent}";
            smiv2:max-access "read-write";
            smiv2:oid "1.3.6.1.2.1.88.1.2.4.1.1";
            type bits {
              bit present {
                position 0;
              }
              bit absent {
                position 1;
              }
              bit changed {
                position 2;
              }
            }
            description
              "The type of existence test to perform.  The trigger fires
            when the object at mteTriggerValueID is seen to go from
            present to absent, from absent to present, or to have it's
            value changed, depending on which tests are selected:
            
            present(0) - when this test is selected, the trigger fires
            when the mteTriggerValueID object goes from absent to present.
            
            absent(1)  - when this test is selected, the trigger fires
            when the mteTriggerValueID object goes from present to absent.
            changed(2) - when this test is selected, the trigger fires
            the mteTriggerValueID object value changes.
            
            Once the trigger has fired for either presence or absence it
            will not fire again for that state until the object has been
            to the other state. ";
          }

          leaf mteTriggerExistenceStartup {
            smiv2:defval "{present, absent}";
            smiv2:max-access "read-write";
            smiv2:oid "1.3.6.1.2.1.88.1.2.4.1.2";
            type bits {
              bit present {
                position 0;
              }
              bit absent {
                position 1;
              }
            }
            description
              "Control for whether an event may be triggered when this entry
            is first set to 'active' and the test specified by
            mteTriggerExistenceTest is true.  Setting an option causes
            that trigger to fire when its test is true.";
          }

          leaf mteTriggerExistenceObjectsOwner {
            smiv2:defval "";
            smiv2:max-access "read-write";
            smiv2:oid "1.3.6.1.2.1.88.1.2.4.1.3";
            type snmp-framework:SnmpAdminString {
              length "0..32";
            }
            description
              "To go with mteTriggerExistenceObjects, the mteOwner of a
            group of objects from mteObjectsTable.";
          }

          leaf mteTriggerExistenceObjects {
            smiv2:defval "";
            smiv2:max-access "read-write";
            smiv2:oid "1.3.6.1.2.1.88.1.2.4.1.4";
            type snmp-framework:SnmpAdminString {
              length "0..32";
            }
            description
              "The mteObjectsName of a group of objects from
            mteObjectsTable.  These objects are to be added to any
            Notification resulting from the firing of this trigger for
            this test.
            
            A list of objects may also be added based on the overall
            trigger, the event or other settings in mteTriggerTest.
            
            A length of 0 indicates no additional objects.";
          }

          leaf mteTriggerExistenceEventOwner {
            smiv2:defval "";
            smiv2:max-access "read-write";
            smiv2:oid "1.3.6.1.2.1.88.1.2.4.1.5";
            type snmp-framework:SnmpAdminString {
              length "0..32";
            }
            description
              "To go with mteTriggerExistenceEvent, the mteOwner of an event
            entry from the mteEventTable.";
          }

          leaf mteTriggerExistenceEvent {
            smiv2:defval "";
            smiv2:max-access "read-write";
            smiv2:oid "1.3.6.1.2.1.88.1.2.4.1.6";
            type snmp-framework:SnmpAdminString {
              length "0..32";
            }
            description
              "The mteEventName of the event to invoke when mteTriggerType is
            'existence' and this trigger fires.  A length of 0 indicates no
            event.";
          }
        }  // list mteTriggerExistenceEntry
      }  // container mteTriggerExistenceTable

      container mteTriggerBooleanTable {
        smiv2:oid "1.3.6.1.2.1.88.1.2.5";
        description
          "A table of management event trigger information for boolean
        triggers.";
        list mteTriggerBooleanEntry {
          smiv2:implied "mteTriggerName";
          smiv2:oid "1.3.6.1.2.1.88.1.2.5.1";
          key "mteOwner mteTriggerName";
          description
            "Information about a single boolean trigger.  Entries
          automatically exist in this this table for each mteTriggerEntry
          that has 'boolean' set in mteTriggerTest.";
          leaf mteOwner {
            type leafref {
              path "/DISMAN-EVENT-MIB:DISMAN-EVENT-MIB/DISMAN-EVENT-MIB:mteTriggerTable/DISMAN-EVENT-MIB:mteTriggerEntry/DISMAN-EVENT-MIB:mteOwner";
            }
          }

          leaf mteTriggerName {
            type leafref {
              path "/DISMAN-EVENT-MIB:DISMAN-EVENT-MIB/DISMAN-EVENT-MIB:mteTriggerTable/DISMAN-EVENT-MIB:mteTriggerEntry/DISMAN-EVENT-MIB:mteTriggerName";
            }
          }

          leaf mteTriggerBooleanComparison {
            smiv2:defval "unequal";
            smiv2:max-access "read-write";
            smiv2:oid "1.3.6.1.2.1.88.1.2.5.1.1";
            type enumeration {
              enum "unequal" {
                value 1;
              }
              enum "equal" {
                value 2;
              }
              enum "less" {
                value 3;
              }
              enum "lessOrEqual" {
                value 4;
              }
              enum "greater" {
                value 5;
              }
              enum "greaterOrEqual" {
                value 6;
              }
            }
            description
              "The type of boolean comparison to perform.
            
            The value at mteTriggerValueID is compared to
            mteTriggerBooleanValue, so for example if
            mteTriggerBooleanComparison is 'less' the result would be true
            if the value at mteTriggerValueID is less than the value of
            mteTriggerBooleanValue.";
          }

          leaf mteTriggerBooleanValue {
            smiv2:defval "0";
            smiv2:max-access "read-write";
            smiv2:oid "1.3.6.1.2.1.88.1.2.5.1.2";
            type int32;
            description
              "The value to use for the test specified by
            mteTriggerBooleanTest.";
          }

          leaf mteTriggerBooleanStartup {
            smiv2:defval "true";
            smiv2:max-access "read-write";
            smiv2:oid "1.3.6.1.2.1.88.1.2.5.1.3";
            type boolean;
            description
              "Control for whether an event may be triggered when this entry
            is first set to 'active' or a new instance of the object at
            mteTriggerValueID is found and the test specified by
            mteTriggerBooleanComparison is true.  In that case an event is
            triggered if mteTriggerBooleanStartup is 'true'.";
          }

          leaf mteTriggerBooleanObjectsOwner {
            smiv2:defval "";
            smiv2:max-access "read-write";
            smiv2:oid "1.3.6.1.2.1.88.1.2.5.1.4";
            type snmp-framework:SnmpAdminString {
              length "0..32";
            }
            description
              "To go with mteTriggerBooleanObjects, the mteOwner of a group
            of objects from mteObjectsTable.";
          }

          leaf mteTriggerBooleanObjects {
            smiv2:defval "";
            smiv2:max-access "read-write";
            smiv2:oid "1.3.6.1.2.1.88.1.2.5.1.5";
            type snmp-framework:SnmpAdminString {
              length "0..32";
            }
            description
              "The mteObjectsName of a group of objects from
            mteObjectsTable.  These objects are to be added to any
            Notification resulting from the firing of this trigger for
            this test.
            
            A list of objects may also be added based on the overall
            trigger, the event or other settings in mteTriggerTest.
            
            A length of 0 indicates no additional objects.";
          }

          leaf mteTriggerBooleanEventOwner {
            smiv2:defval "";
            smiv2:max-access "read-write";
            smiv2:oid "1.3.6.1.2.1.88.1.2.5.1.6";
            type snmp-framework:SnmpAdminString {
              length "0..32";
            }
            description
              "To go with mteTriggerBooleanEvent, the mteOwner of an event
            entry from mteEventTable.";
          }

          leaf mteTriggerBooleanEvent {
            smiv2:defval "";
            smiv2:max-access "read-write";
            smiv2:oid "1.3.6.1.2.1.88.1.2.5.1.7";
            type snmp-framework:SnmpAdminString {
              length "0..32";
            }
            description
              "The mteEventName of the event to invoke when mteTriggerType is
            'boolean' and this trigger fires.  A length of 0 indicates no
            event.";
          }
        }  // list mteTriggerBooleanEntry
      }  // container mteTriggerBooleanTable

      container mteTriggerThresholdTable {
        smiv2:oid "1.3.6.1.2.1.88.1.2.6";
        description
          "A table of management event trigger information for threshold
        triggers.";
        list mteTriggerThresholdEntry {
          smiv2:implied "mteTriggerName";
          smiv2:oid "1.3.6.1.2.1.88.1.2.6.1";
          key "mteOwner mteTriggerName";
          description
            "Information about a single threshold trigger.  Entries
          automatically exist in this table for each mteTriggerEntry
          that has 'threshold' set in mteTriggerTest.";
          leaf mteOwner {
            type leafref {
              path "/DISMAN-EVENT-MIB:DISMAN-EVENT-MIB/DISMAN-EVENT-MIB:mteTriggerTable/DISMAN-EVENT-MIB:mteTriggerEntry/DISMAN-EVENT-MIB:mteOwner";
            }
          }

          leaf mteTriggerName {
            type leafref {
              path "/DISMAN-EVENT-MIB:DISMAN-EVENT-MIB/DISMAN-EVENT-MIB:mteTriggerTable/DISMAN-EVENT-MIB:mteTriggerEntry/DISMAN-EVENT-MIB:mteTriggerName";
            }
          }

          leaf mteTriggerThresholdStartup {
            smiv2:defval "risingOrFalling";
            smiv2:max-access "read-write";
            smiv2:oid "1.3.6.1.2.1.88.1.2.6.1.1";
            type enumeration {
              enum "rising" {
                value 1;
              }
              enum "falling" {
                value 2;
              }
              enum "risingOrFalling" {
                value 3;
              }
            }
            description
              "The event that may be triggered when this entry is first
            set to 'active' and a new instance of the object at
            mteTriggerValueID is found.  If the first sample after this
            instance becomes active is greater than or equal to
            mteTriggerThresholdRising and mteTriggerThresholdStartup is
            equal to 'rising' or 'risingOrFalling', then one
            mteTriggerThresholdRisingEvent is triggered for that instance.
            If the first sample after this entry becomes active is less
            than or equal to mteTriggerThresholdFalling and
            mteTriggerThresholdStartup is equal to 'falling' or
            'risingOrFalling', then one mteTriggerThresholdRisingEvent is
            triggered for that instance.";
          }

          leaf mteTriggerThresholdRising {
            smiv2:defval "0";
            smiv2:max-access "read-write";
            smiv2:oid "1.3.6.1.2.1.88.1.2.6.1.2";
            type int32;
            description
              "A threshold value to check against if mteTriggerType is
            'threshold'.
            
            When the current sampled value is greater than or equal to
            this threshold, and the value at the last sampling interval
            was less than this threshold, one
            mteTriggerThresholdRisingEvent is triggered.  That event is
            also triggered if the first sample after this entry becomes
            active is greater than or equal to this threshold and
            mteTriggerThresholdStartup is equal to 'rising' or
            'risingOrFalling'.
            
            After a rising event is generated, another such event is not
            triggered until the sampled value falls below this threshold
            and reaches mteTriggerThresholdFalling.";
          }

          leaf mteTriggerThresholdFalling {
            smiv2:defval "0";
            smiv2:max-access "read-write";
            smiv2:oid "1.3.6.1.2.1.88.1.2.6.1.3";
            type int32;
            description
              "A threshold value to check against if mteTriggerType is
            'threshold'.
            
            When the current sampled value is less than or equal to this
            threshold, and the value at the last sampling interval was
            greater than this threshold, one
            mteTriggerThresholdFallingEvent is triggered.  That event is
            also triggered if the first sample after this entry becomes
            active is less than or equal to this threshold and
            mteTriggerThresholdStartup is equal to 'falling' or
            'risingOrFalling'.
            
            After a falling event is generated, another such event is not
            triggered until the sampled value rises above this threshold
            and reaches mteTriggerThresholdRising.";
          }

          leaf mteTriggerThresholdDeltaRising {
            smiv2:defval "0";
            smiv2:max-access "read-write";
            smiv2:oid "1.3.6.1.2.1.88.1.2.6.1.4";
            type int32;
            description
              "A threshold value to check against if mteTriggerType is
            'threshold'.
            
            When the delta value (difference) between the current sampled
            value (value(n)) and the previous sampled value (value(n-1))
            is greater than or equal to this threshold,
            and the delta value calculated at the last sampling interval
            (i.e. value(n-1) - value(n-2)) was less than this threshold,
            one mteTriggerThresholdDeltaRisingEvent is triggered. That event
            is also triggered if the first delta value calculated after this
            entry becomes active, i.e. value(2) - value(1), where value(1)
            is the first sample taken of that instance, is greater than or
            equal to this threshold.
            
            After a rising event is generated, another such event is not
            triggered until the delta value falls below this threshold and
            reaches mteTriggerThresholdDeltaFalling.";
          }

          leaf mteTriggerThresholdDeltaFalling {
            smiv2:defval "0";
            smiv2:max-access "read-write";
            smiv2:oid "1.3.6.1.2.1.88.1.2.6.1.5";
            type int32;
            description
              "A threshold value to check against if mteTriggerType is
            'threshold'.
            
            When the delta value (difference) between the current sampled
            value (value(n)) and the previous sampled value (value(n-1))
            is less than or equal to this threshold,
            and the delta value calculated at the last sampling interval
            (i.e. value(n-1) - value(n-2)) was greater than this threshold,
            one mteTriggerThresholdDeltaFallingEvent is triggered. That event
            is also triggered if the first delta value calculated after this
            entry becomes active, i.e. value(2) - value(1), where value(1)
            is the first sample taken of that instance, is less than or
            equal to this threshold.
            
            After a falling event is generated, another such event is not
            triggered until the delta value falls below this threshold and
            reaches mteTriggerThresholdDeltaRising.";
          }

          leaf mteTriggerThresholdObjectsOwner {
            smiv2:defval "";
            smiv2:max-access "read-write";
            smiv2:oid "1.3.6.1.2.1.88.1.2.6.1.6";
            type snmp-framework:SnmpAdminString {
              length "0..32";
            }
            description
              "To go with mteTriggerThresholdObjects, the mteOwner of a group
            of objects from mteObjectsTable.";
          }

          leaf mteTriggerThresholdObjects {
            smiv2:defval "";
            smiv2:max-access "read-write";
            smiv2:oid "1.3.6.1.2.1.88.1.2.6.1.7";
            type snmp-framework:SnmpAdminString {
              length "0..32";
            }
            description
              "The mteObjectsName of a group of objects from
            mteObjectsTable.  These objects are to be added to any
            Notification resulting from the firing of this trigger for
            this test.
            
            A list of objects may also be added based on the overall
            
            trigger, the event or other settings in mteTriggerTest.
            
            A length of 0 indicates no additional objects.";
          }

          leaf mteTriggerThresholdRisingEventOwner {
            smiv2:defval "";
            smiv2:max-access "read-write";
            smiv2:oid "1.3.6.1.2.1.88.1.2.6.1.8";
            type snmp-framework:SnmpAdminString {
              length "0..32";
            }
            description
              "To go with mteTriggerThresholdRisingEvent, the mteOwner of an
            event entry from mteEventTable.";
          }

          leaf mteTriggerThresholdRisingEvent {
            smiv2:defval "";
            smiv2:max-access "read-write";
            smiv2:oid "1.3.6.1.2.1.88.1.2.6.1.9";
            type snmp-framework:SnmpAdminString {
              length "0..32";
            }
            description
              "The mteEventName of the event to invoke when mteTriggerType is
            'threshold' and this trigger fires based on
            mteTriggerThresholdRising.  A length of 0 indicates no event.";
          }

          leaf mteTriggerThresholdFallingEventOwner {
            smiv2:defval "";
            smiv2:max-access "read-write";
            smiv2:oid "1.3.6.1.2.1.88.1.2.6.1.10";
            type snmp-framework:SnmpAdminString {
              length "0..32";
            }
            description
              "To go with mteTriggerThresholdFallingEvent, the mteOwner of an
            event entry from mteEventTable.";
          }

          leaf mteTriggerThresholdFallingEvent {
            smiv2:defval "";
            smiv2:max-access "read-write";
            smiv2:oid "1.3.6.1.2.1.88.1.2.6.1.11";
            type snmp-framework:SnmpAdminString {
              length "0..32";
            }
            description
              "The mteEventName of the event to invoke when mteTriggerType is
            'threshold' and this trigger fires based on
            mteTriggerThresholdFalling.  A length of 0 indicates no event.";
          }

          leaf mteTriggerThresholdDeltaRisingEventOwner {
            smiv2:defval "";
            smiv2:max-access "read-write";
            smiv2:oid "1.3.6.1.2.1.88.1.2.6.1.12";
            type snmp-framework:SnmpAdminString {
              length "0..32";
            }
            description
              "To go with mteTriggerThresholdDeltaRisingEvent, the mteOwner
            of an event entry from mteEventTable.";
          }

          leaf mteTriggerThresholdDeltaRisingEvent {
            smiv2:defval "";
            smiv2:max-access "read-write";
            smiv2:oid "1.3.6.1.2.1.88.1.2.6.1.13";
            type snmp-framework:SnmpAdminString {
              length "0..32";
            }
            description
              "The mteEventName of the event to invoke when mteTriggerType is
            'threshold' and this trigger fires based on
            mteTriggerThresholdDeltaRising. A length of 0 indicates
            no event.";
          }

          leaf mteTriggerThresholdDeltaFallingEventOwner {
            smiv2:defval "";
            smiv2:max-access "read-write";
            smiv2:oid "1.3.6.1.2.1.88.1.2.6.1.14";
            type snmp-framework:SnmpAdminString {
              length "0..32";
            }
            description
              "To go with mteTriggerThresholdDeltaFallingEvent, the mteOwner
            of an event entry from mteEventTable.";
          }

          leaf mteTriggerThresholdDeltaFallingEvent {
            smiv2:defval "";
            smiv2:max-access "read-write";
            smiv2:oid "1.3.6.1.2.1.88.1.2.6.1.15";
            type snmp-framework:SnmpAdminString {
              length "0..32";
            }
            description
              "The mteEventName of the event to invoke when mteTriggerType is
            'threshold' and this trigger fires based on
            mteTriggerThresholdDeltaFalling.  A length of 0 indicates
            no event.";
          }
        }  // list mteTriggerThresholdEntry
      }  // container mteTriggerThresholdTable

      container mteObjectsTable {
        smiv2:oid "1.3.6.1.2.1.88.1.3.1";
        description
          "A table of objects that can be added to notifications based
        on the trigger, trigger test, or event, as pointed to by
        entries in those tables.";
        list mteObjectsEntry {
          smiv2:oid "1.3.6.1.2.1.88.1.3.1.1";
          key "mteOwner mteObjectsName mteObjectsIndex";
          description
            "A group of objects.  Applications create and delete entries
          using mteObjectsEntryStatus.
          
          When adding objects to a notification they are added in the
          lexical order of their index in this table.  Those associated
          with a trigger come first, then trigger test, then event.";
          leaf mteOwner {
            type leafref {
              path "/DISMAN-EVENT-MIB:DISMAN-EVENT-MIB/DISMAN-EVENT-MIB:mteTriggerTable/DISMAN-EVENT-MIB:mteTriggerEntry/DISMAN-EVENT-MIB:mteOwner";
            }
          }

          leaf mteObjectsName {
            smiv2:max-access "not-accessible";
            smiv2:oid "1.3.6.1.2.1.88.1.3.1.1.1";
            type snmp-framework:SnmpAdminString {
              length "1..32";
            }
            description
              "A locally-unique, administratively assigned name for a group
            of objects.";
          }

          leaf mteObjectsIndex {
            smiv2:max-access "not-accessible";
            smiv2:oid "1.3.6.1.2.1.88.1.3.1.1.2";
            type uint32 {
              range "1..4294967295";
            }
            description
              "An arbitrary integer for the purpose of identifying
            individual objects within a mteObjectsName group.
            
            Objects within a group are placed in the notification in the
            numerical order of this index.
            
            Groups are placed in the notification in the order of the
            selections for overall trigger, trigger test, and event.
            Within trigger test they are in the same order as the
            numerical values of the bits defined for mteTriggerTest.
            
            Bad object identifiers or a mismatch between truncating the
            identifier and the value of mteDeltaDiscontinuityIDWildcard
            result in operation as one would expect when providing the
            wrong identifier to a Get operation.  The Get will fail or get
            the wrong object.  If the object is not available it is omitted
            from the notification.";
          }

          leaf mteObjectsID {
            smiv2:defval "zeroDotZero";
            smiv2:max-access "read-write";
            smiv2:oid "1.3.6.1.2.1.88.1.3.1.1.3";
            type yang:object-identifier-128;
            description
              "The object identifier of a MIB object to add to a
            Notification that results from the firing of a trigger.
            
            This may be wildcarded by truncating all or part of the
            instance portion, in which case the instance portion of the
            OID for obtaining this object will be the same as that used
            in obtaining the mteTriggerValueID that fired.  If such
            wildcarding is applied, mteObjectsIDWildcard must be
            'true' and if not it must be 'false'.
            
            Each instance that fills the wildcard is independent of any
            additional instances, that is, wildcarded objects operate
            as if there were a separate table entry for each instance
            that fills the wildcard without having to actually predict
            all possible instances ahead of time.";
          }

          leaf mteObjectsIDWildcard {
            smiv2:defval "false";
            smiv2:max-access "read-write";
            smiv2:oid "1.3.6.1.2.1.88.1.3.1.1.4";
            type boolean;
            description
              "Control for whether mteObjectsID is to be treated as
            fully-specified or wildcarded, with 'true' indicating wildcard.";
          }

          leaf mteObjectsEntryStatus {
            smiv2:max-access "read-write";
            smiv2:oid "1.3.6.1.2.1.88.1.3.1.1.5";
            type snmpv2-tc:RowStatus;
            description
              "The control that allows creation and deletion of entries.
            Once made active an entry MAY not be modified except to
            delete it.";
          }
        }  // list mteObjectsEntry
      }  // container mteObjectsTable

      container mteEventTable {
        smiv2:oid "1.3.6.1.2.1.88.1.4.2";
        description
          "A table of management event action information.";
        list mteEventEntry {
          smiv2:implied "mteEventName";
          smiv2:oid "1.3.6.1.2.1.88.1.4.2.1";
          key "mteOwner mteEventName";
          description
            "Information about a single event.  Applications create and
          delete entries using mteEventEntryStatus.";
          leaf mteOwner {
            type leafref {
              path "/DISMAN-EVENT-MIB:DISMAN-EVENT-MIB/DISMAN-EVENT-MIB:mteTriggerTable/DISMAN-EVENT-MIB:mteTriggerEntry/DISMAN-EVENT-MIB:mteOwner";
            }
          }

          leaf mteEventName {
            smiv2:max-access "not-accessible";
            smiv2:oid "1.3.6.1.2.1.88.1.4.2.1.1";
            type snmp-framework:SnmpAdminString {
              length "1..32";
            }
            description
              "A locally-unique, administratively assigned name for the
            event.";
          }

          leaf mteEventComment {
            smiv2:defval "";
            smiv2:max-access "read-write";
            smiv2:oid "1.3.6.1.2.1.88.1.4.2.1.2";
            type snmp-framework:SnmpAdminString;
            description
              "A description of the event's function and use.";
          }

          leaf mteEventActions {
            smiv2:defval "{}";
            smiv2:max-access "read-write";
            smiv2:oid "1.3.6.1.2.1.88.1.4.2.1.3";
            type bits {
              bit notification {
                position 0;
              }
              bit set {
                position 1;
              }
            }
            description
              "The actions to perform when this event occurs.
            
            For 'notification', Traps and/or Informs are sent according
            to the configuration in the SNMP Notification MIB.
            
            For 'set', an SNMP Set operation is performed according to
            control values in this entry.";
          }

          leaf mteEventEnabled {
            smiv2:defval "false";
            smiv2:max-access "read-write";
            smiv2:oid "1.3.6.1.2.1.88.1.4.2.1.4";
            type boolean;
            description
              "A control to allow an event to be configured but not used.
            When the value is 'false' the event does not execute even if
            
            triggered.";
          }

          leaf mteEventEntryStatus {
            smiv2:max-access "read-write";
            smiv2:oid "1.3.6.1.2.1.88.1.4.2.1.5";
            type snmpv2-tc:RowStatus;
            description
              "The control that allows creation and deletion of entries.
            Once made active an entry MAY not be modified except to
            delete it.";
          }
        }  // list mteEventEntry
      }  // container mteEventTable

      container mteEventNotificationTable {
        smiv2:oid "1.3.6.1.2.1.88.1.4.3";
        description
          "A table of information about notifications to be sent as a
        consequence of management events.";
        list mteEventNotificationEntry {
          smiv2:implied "mteEventName";
          smiv2:oid "1.3.6.1.2.1.88.1.4.3.1";
          key "mteOwner mteEventName";
          description
            "Information about a single event's notification.  Entries
          automatically exist in this this table for each mteEventEntry
          that has 'notification' set in mteEventActions.";
          leaf mteOwner {
            type leafref {
              path "/DISMAN-EVENT-MIB:DISMAN-EVENT-MIB/DISMAN-EVENT-MIB:mteTriggerTable/DISMAN-EVENT-MIB:mteTriggerEntry/DISMAN-EVENT-MIB:mteOwner";
            }
          }

          leaf mteEventName {
            type leafref {
              path "/DISMAN-EVENT-MIB:DISMAN-EVENT-MIB/DISMAN-EVENT-MIB:mteEventTable/DISMAN-EVENT-MIB:mteEventEntry/DISMAN-EVENT-MIB:mteEventName";
            }
          }

          leaf mteEventNotification {
            smiv2:defval "zeroDotZero";
            smiv2:max-access "read-write";
            smiv2:oid "1.3.6.1.2.1.88.1.4.3.1.1";
            type yang:object-identifier-128;
            description
              "The object identifier from the NOTIFICATION-TYPE for the
            notification to use if metEventActions has 'notification' set.";
          }

          leaf mteEventNotificationObjectsOwner {
            smiv2:defval "";
            smiv2:max-access "read-write";
            smiv2:oid "1.3.6.1.2.1.88.1.4.3.1.2";
            type snmp-framework:SnmpAdminString {
              length "0..32";
            }
            description
              "To go with mteEventNotificationObjects, the mteOwner of a
            group of objects from mteObjectsTable.";
          }

          leaf mteEventNotificationObjects {
            smiv2:defval "";
            smiv2:max-access "read-write";
            smiv2:oid "1.3.6.1.2.1.88.1.4.3.1.3";
            type snmp-framework:SnmpAdminString {
              length "0..32";
            }
            description
              "The mteObjectsName of a group of objects from
            mteObjectsTable if mteEventActions has 'notification' set.
            These objects are to be added to any Notification generated by
            this event.
            
            Objects may also be added based on the trigger that stimulated
            the event.
            
            A length of 0 indicates no additional objects.";
          }
        }  // list mteEventNotificationEntry
      }  // container mteEventNotificationTable

      container mteEventSetTable {
        smiv2:oid "1.3.6.1.2.1.88.1.4.4";
        description
          "A table of management event action information.";
        list mteEventSetEntry {
          smiv2:implied "mteEventName";
          smiv2:oid "1.3.6.1.2.1.88.1.4.4.1";
          key "mteOwner mteEventName";
          description
            "Information about a single event's set option.  Entries
          automatically exist in this this table for each mteEventEntry
          that has 'set' set in mteEventActions.";
          leaf mteOwner {
            type leafref {
              path "/DISMAN-EVENT-MIB:DISMAN-EVENT-MIB/DISMAN-EVENT-MIB:mteTriggerTable/DISMAN-EVENT-MIB:mteTriggerEntry/DISMAN-EVENT-MIB:mteOwner";
            }
          }

          leaf mteEventName {
            type leafref {
              path "/DISMAN-EVENT-MIB:DISMAN-EVENT-MIB/DISMAN-EVENT-MIB:mteEventTable/DISMAN-EVENT-MIB:mteEventEntry/DISMAN-EVENT-MIB:mteEventName";
            }
          }

          leaf mteEventSetObject {
            smiv2:defval "zeroDotZero";
            smiv2:max-access "read-write";
            smiv2:oid "1.3.6.1.2.1.88.1.4.4.1.1";
            type yang:object-identifier-128;
            description
              "The object identifier from the MIB object to set if
            mteEventActions has 'set' set.
            
            This object identifier may be wildcarded by leaving
            sub-identifiers off the end, in which case
            nteEventSetObjectWildCard must be 'true'.
            
            If mteEventSetObject is wildcarded the instance used to set the
            object to which it points is the same as the instance from the
            value of mteTriggerValueID that triggered the event.
            
            Each instance that fills the wildcard is independent of any
            additional instances, that is, wildcarded objects operate
            as if there were a separate table entry for each instance
            that fills the wildcard without having to actually predict
            all possible instances ahead of time.
            
            Bad object identifiers or a mismatch between truncating the
            identifier and the value of mteSetObjectWildcard
            result in operation as one would expect when providing the
            wrong identifier to a Set operation.  The Set will fail or set
            the wrong object.  If the value syntax of the destination
            object is not correct, the Set fails with the normal SNMP
            error code.";
          }

          leaf mteEventSetObjectWildcard {
            smiv2:defval "false";
            smiv2:max-access "read-write";
            smiv2:oid "1.3.6.1.2.1.88.1.4.4.1.2";
            type boolean;
            description
              "Control over whether mteEventSetObject is to be treated as
            fully-specified or wildcarded, with 'true' indicating wildcard
            if mteEventActions has 'set' set.";
          }

          leaf mteEventSetValue {
            smiv2:defval "0";
            smiv2:max-access "read-write";
            smiv2:oid "1.3.6.1.2.1.88.1.4.4.1.3";
            type int32;
            description
              "The value to which to set the object at mteEventSetObject
            if mteEventActions has 'set' set.";
          }

          leaf mteEventSetTargetTag {
            smiv2:defval "";
            smiv2:max-access "read-write";
            smiv2:oid "1.3.6.1.2.1.88.1.4.4.1.4";
            type snmp-target:SnmpTagValue;
            description
              "The tag for the target(s) at which to set the object at
            mteEventSetObject to mteEventSetValue if mteEventActions
            has 'set' set.
            
            Systems limited to self management MAY reject a non-zero
            length for the value of this object.
            
            A length of 0 indicates the local system.  In this case,
            access to the objects indicated by mteEventSetObject is under
            the security credentials of the requester that set
            mteTriggerEntryStatus to 'active'.  Those credentials are the
            input parameters for isAccessAllowed from the Architecture for
            Describing SNMP Management Frameworks.
            
            Otherwise access rights are checked according to the security
            parameters resulting from the tag.";
          }

          leaf mteEventSetContextName {
            smiv2:defval "";
            smiv2:max-access "read-write";
            smiv2:oid "1.3.6.1.2.1.88.1.4.4.1.5";
            type snmp-framework:SnmpAdminString;
            description
              "The management context in which to set mteEventObjectID.
            if mteEventActions has 'set' set.
            
            This may be wildcarded by leaving characters off the end.  To
            indicate such wildcarding mteEventSetContextNameWildcard must
            be 'true'.
            
            If this context name is wildcarded the value used to complete
            the wildcarding of mteTriggerContextName will be appended.";
          }

          leaf mteEventSetContextNameWildcard {
            smiv2:defval "false";
            smiv2:max-access "read-write";
            smiv2:oid "1.3.6.1.2.1.88.1.4.4.1.6";
            type boolean;
            description
              "Control for whether mteEventSetContextName is to be treated as
            fully-specified or wildcarded, with 'true' indicating wildcard
            if mteEventActions has 'set' set.";
          }
        }  // list mteEventSetEntry
      }  // container mteEventSetTable
    }  // container DISMAN-EVENT-MIB

    notification mteTriggerFired {
      smiv2:oid "1.3.6.1.2.1.88.2.0.1";
      description
        "Notification that the trigger indicated by the object
      instances has fired, for triggers with mteTriggerType
      'boolean' or 'existence'.";
      container object-1 {
        leaf mteHotTrigger {
          smiv2:max-access "accessible-for-notify";
          smiv2:oid "1.3.6.1.2.1.88.2.1.1";
          type snmp-framework:SnmpAdminString;
          description
            "The name of the trigger causing the notification.";
        }
      }  // container object-1

      container object-2 {
        leaf mteHotTargetName {
          smiv2:max-access "accessible-for-notify";
          smiv2:oid "1.3.6.1.2.1.88.2.1.2";
          type snmp-framework:SnmpAdminString;
          description
            "The SNMP Target MIB's snmpTargetAddrName related to the
          notification.";
        }
      }  // container object-2

      container object-3 {
        leaf mteHotContextName {
          smiv2:max-access "accessible-for-notify";
          smiv2:oid "1.3.6.1.2.1.88.2.1.3";
          type snmp-framework:SnmpAdminString;
          description
            "The context name related to the notification.  This MUST be as
          fully-qualified as possible, including filling in wildcard
          information determined in processing.";
        }
      }  // container object-3

      container object-4 {
        leaf mteHotOID {
          smiv2:max-access "accessible-for-notify";
          smiv2:oid "1.3.6.1.2.1.88.2.1.4";
          type yang:object-identifier-128;
          description
            "The object identifier of the destination object related to the
          notification.  This MUST be as fully-qualified as possible,
          including filling in wildcard information determined in
          processing.
          
          For a trigger-related notification this is from
          mteTriggerValueID.
          
          For a set failure this is from mteEventSetObject.";
        }
      }  // container object-4

      container object-5 {
        leaf mteHotValue {
          smiv2:max-access "accessible-for-notify";
          smiv2:oid "1.3.6.1.2.1.88.2.1.5";
          type int32;
          description
            "The value of the object at mteTriggerValueID when a
          trigger fired.";
        }
      }  // container object-5
    }  // notification mteTriggerFired

    notification mteTriggerRising {
      smiv2:oid "1.3.6.1.2.1.88.2.0.2";
      description
        "Notification that the rising threshold was met for triggers
      with mteTriggerType 'threshold'.";
      container object-1 {
        leaf mteHotTrigger {
          smiv2:max-access "accessible-for-notify";
          smiv2:oid "1.3.6.1.2.1.88.2.1.1";
          type snmp-framework:SnmpAdminString;
          description
            "The name of the trigger causing the notification.";
        }
      }  // container object-1

      container object-2 {
        leaf mteHotTargetName {
          smiv2:max-access "accessible-for-notify";
          smiv2:oid "1.3.6.1.2.1.88.2.1.2";
          type snmp-framework:SnmpAdminString;
          description
            "The SNMP Target MIB's snmpTargetAddrName related to the
          notification.";
        }
      }  // container object-2

      container object-3 {
        leaf mteHotContextName {
          smiv2:max-access "accessible-for-notify";
          smiv2:oid "1.3.6.1.2.1.88.2.1.3";
          type snmp-framework:SnmpAdminString;
          description
            "The context name related to the notification.  This MUST be as
          fully-qualified as possible, including filling in wildcard
          information determined in processing.";
        }
      }  // container object-3

      container object-4 {
        leaf mteHotOID {
          smiv2:max-access "accessible-for-notify";
          smiv2:oid "1.3.6.1.2.1.88.2.1.4";
          type yang:object-identifier-128;
          description
            "The object identifier of the destination object related to the
          notification.  This MUST be as fully-qualified as possible,
          including filling in wildcard information determined in
          processing.
          
          For a trigger-related notification this is from
          mteTriggerValueID.
          
          For a set failure this is from mteEventSetObject.";
        }
      }  // container object-4

      container object-5 {
        leaf mteHotValue {
          smiv2:max-access "accessible-for-notify";
          smiv2:oid "1.3.6.1.2.1.88.2.1.5";
          type int32;
          description
            "The value of the object at mteTriggerValueID when a
          trigger fired.";
        }
      }  // container object-5
    }  // notification mteTriggerRising

    notification mteTriggerFalling {
      smiv2:oid "1.3.6.1.2.1.88.2.0.3";
      description
        "Notification that the falling threshold was met for triggers
      with mteTriggerType 'threshold'.";
      container object-1 {
        leaf mteHotTrigger {
          smiv2:max-access "accessible-for-notify";
          smiv2:oid "1.3.6.1.2.1.88.2.1.1";
          type snmp-framework:SnmpAdminString;
          description
            "The name of the trigger causing the notification.";
        }
      }  // container object-1

      container object-2 {
        leaf mteHotTargetName {
          smiv2:max-access "accessible-for-notify";
          smiv2:oid "1.3.6.1.2.1.88.2.1.2";
          type snmp-framework:SnmpAdminString;
          description
            "The SNMP Target MIB's snmpTargetAddrName related to the
          notification.";
        }
      }  // container object-2

      container object-3 {
        leaf mteHotContextName {
          smiv2:max-access "accessible-for-notify";
          smiv2:oid "1.3.6.1.2.1.88.2.1.3";
          type snmp-framework:SnmpAdminString;
          description
            "The context name related to the notification.  This MUST be as
          fully-qualified as possible, including filling in wildcard
          information determined in processing.";
        }
      }  // container object-3

      container object-4 {
        leaf mteHotOID {
          smiv2:max-access "accessible-for-notify";
          smiv2:oid "1.3.6.1.2.1.88.2.1.4";
          type yang:object-identifier-128;
          description
            "The object identifier of the destination object related to the
          notification.  This MUST be as fully-qualified as possible,
          including filling in wildcard information determined in
          processing.
          
          For a trigger-related notification this is from
          mteTriggerValueID.
          
          For a set failure this is from mteEventSetObject.";
        }
      }  // container object-4

      container object-5 {
        leaf mteHotValue {
          smiv2:max-access "accessible-for-notify";
          smiv2:oid "1.3.6.1.2.1.88.2.1.5";
          type int32;
          description
            "The value of the object at mteTriggerValueID when a
          trigger fired.";
        }
      }  // container object-5
    }  // notification mteTriggerFalling

    notification mteTriggerFailure {
      smiv2:oid "1.3.6.1.2.1.88.2.0.4";
      description
        "Notification that an attempt to check a trigger has failed.
      
      The network manager must enable this notification only with
      a certain fear and trembling, as it can easily crowd out more
      important information.  It should be used only to help diagnose
      a problem that has appeared in the error counters and can not
      be found otherwise.";
      container object-1 {
        leaf mteHotTrigger {
          smiv2:max-access "accessible-for-notify";
          smiv2:oid "1.3.6.1.2.1.88.2.1.1";
          type snmp-framework:SnmpAdminString;
          description
            "The name of the trigger causing the notification.";
        }
      }  // container object-1

      container object-2 {
        leaf mteHotTargetName {
          smiv2:max-access "accessible-for-notify";
          smiv2:oid "1.3.6.1.2.1.88.2.1.2";
          type snmp-framework:SnmpAdminString;
          description
            "The SNMP Target MIB's snmpTargetAddrName related to the
          notification.";
        }
      }  // container object-2

      container object-3 {
        leaf mteHotContextName {
          smiv2:max-access "accessible-for-notify";
          smiv2:oid "1.3.6.1.2.1.88.2.1.3";
          type snmp-framework:SnmpAdminString;
          description
            "The context name related to the notification.  This MUST be as
          fully-qualified as possible, including filling in wildcard
          information determined in processing.";
        }
      }  // container object-3

      container object-4 {
        leaf mteHotOID {
          smiv2:max-access "accessible-for-notify";
          smiv2:oid "1.3.6.1.2.1.88.2.1.4";
          type yang:object-identifier-128;
          description
            "The object identifier of the destination object related to the
          notification.  This MUST be as fully-qualified as possible,
          including filling in wildcard information determined in
          processing.
          
          For a trigger-related notification this is from
          mteTriggerValueID.
          
          For a set failure this is from mteEventSetObject.";
        }
      }  // container object-4

      container object-5 {
        leaf mteFailedReason {
          smiv2:max-access "accessible-for-notify";
          smiv2:oid "1.3.6.1.2.1.88.2.1.6";
          type FailureReason;
          description
            "The reason for the failure of an attempt to check for a
          trigger condition or set an object in response to an event.";
        }
      }  // container object-5
    }  // notification mteTriggerFailure

    notification mteEventSetFailure {
      smiv2:oid "1.3.6.1.2.1.88.2.0.5";
      description
        "Notification that an attempt to do a set in response to an
      event has failed.
      
      The network manager must enable this notification only with
      a certain fear and trembling, as it can easily crowd out more
      important information.  It should be used only to help diagnose
      a problem that has appeared in the error counters and can not
      be found otherwise.";
      container object-1 {
        leaf mteHotTrigger {
          smiv2:max-access "accessible-for-notify";
          smiv2:oid "1.3.6.1.2.1.88.2.1.1";
          type snmp-framework:SnmpAdminString;
          description
            "The name of the trigger causing the notification.";
        }
      }  // container object-1

      container object-2 {
        leaf mteHotTargetName {
          smiv2:max-access "accessible-for-notify";
          smiv2:oid "1.3.6.1.2.1.88.2.1.2";
          type snmp-framework:SnmpAdminString;
          description
            "The SNMP Target MIB's snmpTargetAddrName related to the
          notification.";
        }
      }  // container object-2

      container object-3 {
        leaf mteHotContextName {
          smiv2:max-access "accessible-for-notify";
          smiv2:oid "1.3.6.1.2.1.88.2.1.3";
          type snmp-framework:SnmpAdminString;
          description
            "The context name related to the notification.  This MUST be as
          fully-qualified as possible, including filling in wildcard
          information determined in processing.";
        }
      }  // container object-3

      container object-4 {
        leaf mteHotOID {
          smiv2:max-access "accessible-for-notify";
          smiv2:oid "1.3.6.1.2.1.88.2.1.4";
          type yang:object-identifier-128;
          description
            "The object identifier of the destination object related to the
          notification.  This MUST be as fully-qualified as possible,
          including filling in wildcard information determined in
          processing.
          
          For a trigger-related notification this is from
          mteTriggerValueID.
          
          For a set failure this is from mteEventSetObject.";
        }
      }  // container object-4

      container object-5 {
        leaf mteFailedReason {
          smiv2:max-access "accessible-for-notify";
          smiv2:oid "1.3.6.1.2.1.88.2.1.6";
          type FailureReason;
          description
            "The reason for the failure of an attempt to check for a
          trigger condition or set an object in response to an event.";
        }
      }  // container object-5
    }  // notification mteEventSetFailure
  }  // module DISMAN-EVENT-MIB