module Cisco-IOS-XE-wireless-access-point-cfg-rpc {

    yang-version 1;

    namespace
      "http://cisco.com/ns/yang/Cisco-IOS-XE-wireless-access-point-cfg-rpc";

    prefix wireless-access-point-cfg-rpc;

    import Cisco-IOS-XE-wireless-enum-types {
      prefix wireless-enum-types;
    }
    import Cisco-IOS-XE-wireless-types {
      prefix wireless-types;
    }
    import ietf-inet-types {
      prefix inet;
    }
    import ietf-yang-types {
      prefix yang;
    }
    import cisco-semver {
      prefix cisco-semver;
    }

    organization "Cisco Systems, Inc.";

    contact
      "Cisco Systems, Inc.
     Customer Service

     Postal: 170 W Tasman Drive
     San Jose, CA 95134

     Tel: +1 1800 553-NETS

     E-mail: cs-yang@cisco.com";

    description
      "Copyright (c) 2019-2021 by Cisco Systems, Inc.
     All rights reserved.";

    revision "2021-07-01" {
      description
        "- Modified slot and band range on applicable paths
       - Added option to configure either name or IP address in rpc set-ap-controller";
      reference
        "4.0.0";

    }

    revision "2021-03-01" {
      description
        "- Changed the pattern for AP name, location and country code.
       - Added AP LAN port configuration";
      reference
        "3.0.0";

    }

    revision "2020-07-01" {
      description
        "- Added rpc set-ap-controller to configure controller information in access point
       - Added rpc set-ap-cleanair to enable cleanair in access point
       - Added rpc set-ap-slot-phy-ht-customize to configure auto channel selection in access point
       - Added rpc set-ap-slot-phy-ht-chan to configure static channel
       - Added rpc set-ap-mode to configure AP mode.
       - Added must constraint for antenna-band-mode
       - Added range restrictions on leafs slot-id and band on all applicable paths.";
      reference
        "2.0.0";

    }

    revision "2020-03-01" {
      description "Initial revision";
      reference
        "1.0.0";

    }

    cisco-semver:module-version "4.0.0";
    cisco-semver:module-version "3.0.0";
    cisco-semver:module-version "2.0.0";
    cisco-semver:module-version "1.0.0";

    typedef ap-identifier {
      type enumeration {
        enum "ap-identifier-name" {
          value 0;
          description "Alternative AP name";
        }
        enum "ap-identifier-mac-address" {
          value 1;
          description
            "Alternative MAC address";
        }
      }
      description "Access point identifier";
    }

    grouping set-ap-vlan-tag {
      description
        "Configures VLAN tagging for non-bridge AP";
      leaf vlan-id {
        type uint32;
        mandatory true;
        description "Configure VLAN-ID";
      }

      choice alternative-choice {
        mandatory true;
        description
          "AP name or AP MAC address";
        leaf ap-name {
          type string;
          mandatory true;
          description
            "AP name for VLAN tagging";
        }
        leaf mac-addr {
          type yang:mac-address;
          mandatory true;
          description
            "MAC address of AP for VLAN tagging";
        }
      }  // choice alternative-choice
    }  // grouping set-ap-vlan-tag

    grouping set-ap-monitor-mode-chnl-optimize {
      description
        "Channel scanning optimization for AP";
      leaf mode {
        type wireless-enum-types:lomm-mode-type;
        mandatory true;
        description
          "Select AP mode (none, tracking mode, WIPS mode, all)";
      }

      choice alternative-choice {
        mandatory true;
        description
          "AP name or AP MAC address";
        leaf ap-name {
          type string;
          mandatory true;
          description
            "AP name for channel scanning optimization";
        }
        leaf mac-addr {
          type yang:mac-address;
          mandatory true;
          description
            "MAC address of AP for channel scanning optimization";
        }
      }  // choice alternative-choice
    }  // grouping set-ap-monitor-mode-chnl-optimize

    grouping set-ap-mode {
      description "Configures AP mode";
      leaf clear-mode {
        type boolean;
        description
          "Restores AP to site tag mode";
      }

      leaf mode {
        type wireless-types:enm-ewlc-spam-ap-modes;
        must "(../clear-mode = 'false')" {
          error-message
            "disable clear mode while configuring mode.";
          error-app-tag "must-violation";
        }
        must "(../mode != 'mode-sensor')" {
          error-message
            "Sensor mode not supported";
          error-app-tag "must-violation";
        }
        description "Specifies mode of AP";
      }

      choice alternative-choice {
        mandatory true;
        description
          "AP name or AP MAC address";
        leaf ap-name {
          type string;
          mandatory true;
          description
            "Name of AP to configure AP mode";
        }
        leaf mac-addr {
          type yang:mac-address;
          mandatory true;
          description
            "MAC address of AP to configure AP mode";
        }
      }  // choice alternative-choice
    }  // grouping set-ap-mode

    grouping set-lrad-led-state {
      description
        "Configure LED state for Cisco AP";
      leaf ledstate {
        type boolean;
        mandatory true;
        description
          "Led state of AP can be enabled (true) or disabled (false)";
      }

      choice alternative-choice {
        mandatory true;
        description
          "AP name or AP MAC address";
        leaf ap-name {
          type string;
          mandatory true;
          description
            "Name of AP to configure LED state";
        }
        leaf mac-addr {
          type yang:mac-address;
          mandatory true;
          description
            "MAC address of AP to configure LED state";
        }
      }  // choice alternative-choice
    }  // grouping set-lrad-led-state

    grouping set-ap-location {
      description "Configure AP location";
      leaf location {
        type string {
          length "1..256";
          pattern '[ -~]+';
        }
        mandatory true;
        description
          "AP location (example sector A or room A)";
      }

      choice alternative-choice {
        mandatory true;
        description
          "AP name or AP MAC address";
        leaf ap-name {
          type string;
          mandatory true;
          description
            "AP name for location change";
        }
        leaf mac-addr {
          type yang:mac-address;
          mandatory true;
          description
            "MAC address of AP for location change";
        }
      }  // choice alternative-choice
    }  // grouping set-ap-location

    grouping set-ap-name {
      description "Configure a new AP name";
      leaf name {
        type string {
          length "1..32";
          pattern '[!-~]+';
        }
        mandatory true;
        description "New AP name";
      }

      choice alternative-choice {
        mandatory true;
        description
          "AP name or AP MAC address";
        leaf ap-name {
          type string;
          mandatory true;
          description
            "Existing name of AP to be renamed";
        }
        leaf mac-addr {
          type yang:mac-address;
          mandatory true;
          description
            "MAC address of AP to be renamed";
        }
      }  // choice alternative-choice
    }  // grouping set-ap-name

    grouping set-ap-antenna-band-mode {
      description
        "Configure antenna band mode";
      leaf band-val {
        type wireless-enum-types:ant-band-mode;
        must
          "../band-val != 'ant-band-mode-unknown'" {
          error-message
            "ant-band-mode-unknown is not permitted";
          error-app-tag "must-violation";
        }
        mandatory true;
        description
          "Band value can be single or dual";
      }

      choice alternative-choice {
        mandatory true;
        description
          "AP name or AP MAC address";
        leaf ap-name {
          type string;
          mandatory true;
          description
            "Name of AP to configure the antenna band mode";
        }
        leaf mac-addr {
          type yang:mac-address;
          mandatory true;
          description
            "MAC address of AP to configure the antenna band mode";
        }
      }  // choice alternative-choice
    }  // grouping set-ap-antenna-band-mode

    grouping set-ap-country {
      description
        "Configure the country of operation";
      leaf country-string {
        type string {
          length "1..4";
          pattern '[ -~]+';
        }
        mandatory true;
        description
          "Country code for country of operation (i.e. US for United States)";
      }

      choice alternative-choice {
        mandatory true;
        description
          "Alternative AP name and MAC address";
        leaf ap-name {
          type string;
          mandatory true;
          description
            "AP name for configuring country of operation";
        }
        leaf mac-addr {
          type yang:mac-address;
          mandatory true;
          description
            "MAC address of AP for configuring country of operation";
        }
      }  // choice alternative-choice
    }  // grouping set-ap-country

    grouping set-ap-slot-ext-antenna-gain {
      description
        "Configures the external antenna gain of AP";
      leaf external-antenna-gain {
        type uint8;
        units "dBm";
        mandatory true;
        description
          "External antenna gain value in multiple of .5 decibel isotropic units (i.e. An integer value 4 means 4 x 0.5 = 2 decibel isotropic units of gain)";
      }

      leaf slot-id {
        type uint8 {
          range "0..3";
        }
        mandatory true;
        description
          "Slot ID of AP to configure the external antenna gain. Valid value range is 0-3";
      }

      leaf band {
        when '(current()/../slot-id = 3)';
        type wireless-enum-types:enm-radio-band;
        default "band-6-ghz";
        description
          "Radio frequency band to configure external antenna gain.
         1 - 2.4 GHz
         2 - 5 GHz
         3 - Dual band
         4 - 6 Ghz";
      }

      choice alternative-choice {
        mandatory true;
        description
          "AP name or AP MAC address";
        leaf ap-name {
          type string;
          mandatory true;
          description
            "Name of AP to configure the external antenna gain";
        }
        leaf mac-addr {
          type yang:mac-address;
          mandatory true;
          description
            "MAC address of AP to configure the external antenna gain";
        }
      }  // choice alternative-choice
    }  // grouping set-ap-slot-ext-antenna-gain

    grouping set-ap-slot-phy-ht-chan {
      description
        "Configures static channel on a radio interface of AP";
      leaf chan {
        type uint8;
        mandatory true;
        description
          "Specifies channel number";
      }

      leaf slot-id {
        type uint8 {
          range "0..2";
        }
        mandatory true;
        description
          "Specifies slot id of a radio band";
      }

      leaf band {
        type wireless-enum-types:enm-radio-band;
        must
          "current() != 'band-dualband-radio'" {
          error-message
            "Dual band is not supported for this action";
          error-app-tag "must-violation";
        }
        mandatory true;
        description
          "Specifies radio band information of access point";
      }

      choice alternative-choice {
        mandatory true;
        description
          "AP name or AP MAC address";
        leaf ap-name {
          type string;
          mandatory true;
          description
            "Name of AP to configure static channel";
        }
        leaf mac-addr {
          type yang:mac-address;
          mandatory true;
          description
            "Mac address of AP to configure static channel";
        }
      }  // choice alternative-choice
    }  // grouping set-ap-slot-phy-ht-chan

    grouping set-ap-slot-phy-ht-customize {
      description
        "Enables auto channel selection for a radio band of access point";
      leaf slot-id {
        type uint8 {
          range "0..2";
        }
        mandatory true;
        description
          "Specifies slot id of a radio band";
      }

      leaf band {
        type wireless-enum-types:enm-radio-band;
        must
          "current() != 'band-dualband-radio'" {
          error-message
            "Dual band is not supported for this action";
          error-app-tag "must-violation";
        }
        mandatory true;
        description
          "Specifies radio band information of access point";
      }

      choice alternative-choice {
        mandatory true;
        description
          "AP name or AP MAC address";
        leaf ap-name {
          type string;
          mandatory true;
          description
            "Name of AP to configure auto channel selection";
        }
        leaf mac-addr {
          type yang:mac-address;
          mandatory true;
          description
            "MAC address of AP to configure auto selection";
        }
      }  // choice alternative-choice
    }  // grouping set-ap-slot-phy-ht-customize

    grouping set-ap-cleanair {
      description
        "Configures clean air functionality on radio band of access point";
      leaf mode {
        type boolean;
        mandatory true;
        description
          "Enables/Disables clear air functionality";
      }

      leaf slot-id {
        type uint8 {
          range "0..2";
        }
        mandatory true;
        description
          "Specifies slot id of a radio band";
      }

      choice alternative-choice {
        mandatory true;
        description
          "AP name or AP MAC address";
        leaf ap-name {
          type string;
          mandatory true;
          description
            "Name of AP to configure clean air";
        }
        leaf mac-addr {
          type yang:mac-address;
          mandatory true;
          description
            "MAC address of AP to configure clean air";
        }
      }  // choice alternative-choice
    }  // grouping set-ap-cleanair

    grouping dual-band-radio-band {
      description
        "Configures the 802.11 dual-band radio's current band i.e 2.4GHz/5GHz";
      leaf slot-id {
        type uint8 {
          range "0..2";
        }
        mandatory true;
        description
          "Slot ID of AP to configure the 802.11 dual-band radio's current band. Valid value range is 0-2";
      }

      leaf band {
        type uint32 {
          range "1..3";
        }
        mandatory true;
        description
          "Current band of AP
         1 - 2.4 GHz
         2 - 5 GHz
         3 - Dual band";
      }

      leaf toband {
        type uint32 {
          range "1..2";
        }
        mandatory true;
        description
          "New band to switch AP to from current band
         1 - 2.4 GHz
         2 - 5 GHz";
      }

      choice alternative-choice {
        mandatory true;
        description
          "AP name or AP MAC address";
        leaf ap-name {
          type string;
          mandatory true;
          description
            "Name of AP to configure the 802.11 dual-band radio's current band";
        }
        leaf mac-addr {
          type yang:mac-address;
          mandatory true;
          description
            "MAC address of AP to configure the 802.11 dual-band radio's current band";
        }
      }  // choice alternative-choice
    }  // grouping dual-band-radio-band

    grouping lan-port-config-enable {
      description
        "AP LAN port configuration";
      leaf port-id {
        type wireless-enum-types:enm-lan-port-id;
        mandatory true;
        description
          "LAN port identification number";
      }

      leaf mode {
        when
          "../port-config-type = 'set-port-mode'";
        type boolean;
        mandatory true;
        description
          "LAN port can be enabled (true) or disabled (false)";
      }

      leaf poe-enabled {
        when
          "../port-config-type = 'set-poe-state'";
        type boolean;
        mandatory true;
        description
          "PoE of the LAN port can be enabled (true) or disabled (false)";
      }

      leaf power-level-id {
        when
          "../port-config-type = 'set-power-level'";
        type uint8 {
          range "1..4";
        }
        mandatory true;
        description
          "Power level of the LAN port";
      }

      leaf port-config-type {
        type wireless-enum-types:enm-lan-port-config;
        mandatory true;
        description
          "Port parameter to configure";
      }

      choice alternative-choice {
        mandatory true;
        description
          "AP name or AP MAC address";
        leaf ap-name {
          type string;
          mandatory true;
          description
            "Name of AP to configure AP LAN port";
        }
        leaf mac-addr {
          type yang:mac-address;
          mandatory true;
          description
            "MAC address of AP to configure AP LAN port";
        }
      }  // choice alternative-choice
    }  // grouping lan-port-config-enable

    grouping set-ap-controller {
      description
        "Configures controller information in AP";
      leaf mode {
        type wireless-enum-types:enm-controller-name-status;
        must
          "(current() = 'controller-name-disable') or (string-length(../controller-name) > 0) or (string-length(../ipaddr) > 0)" {
          error-message
            "Either controller-name or ipaddr need to be configured";
          error-app-tag "must-violation";
        }
        mandatory true;
        description
          "Configures/clears controller information in AP";
      }

      leaf controller-name {
        type string {
          length "1..31";
          pattern '[a-zA-Z0-9_\-]*';
        }
        description
          "Specifies controller name";
      }

      leaf index {
        type wireless-enum-types:enm-controller-index;
        mandatory true;
        description
          "Specifies primary/secondary/tertiary configuration";
      }

      leaf ipaddr {
        type inet:ip-address;
        description
          "Specifies IP address of controller";
      }

      choice alternative-choice {
        mandatory true;
        description
          "AP name or AP MAC address";
        leaf ap-name {
          type string;
          mandatory true;
          description
            "Name of AP to configure controller information ";
        }
        leaf mac-addr {
          type yang:mac-address;
          mandatory true;
          description
            "MAC address of AP to configure controller information ";
        }
      }  // choice alternative-choice
    }  // grouping set-ap-controller

    grouping set-ap-led-brightness-level {
      description
        "Configure the LED brightness level";
      leaf led-brightness-level {
        type uint8;
        mandatory true;
        description
          "LED brightness level (1..8)";
      }

      choice alternative-choice {
        mandatory true;
        description
          "AP name or AP MAC address";
        leaf ap-name {
          type string;
          mandatory true;
          description
            "Name of AP to configure the led brightness level";
        }
        leaf mac-addr {
          type yang:mac-address;
          mandatory true;
          description
            "MAC address of AP to configure the led brightness level";
        }
      }  // choice alternative-choice
    }  // grouping set-ap-led-brightness-level

    grouping set-ap-slot-tx-power-level {
      description
        "Modify transmit power level of an AP slot (band)";
      leaf tx-power-level {
        type uint8 {
          range "1 .. 8";
        }
        units "dBm";
        mandatory true;
        description
          "Transmit power level (1..8)";
      }

      leaf slot-id {
        type uint8 {
          range "0..3";
        }
        mandatory true;
        description
          "Slot ID of AP to configure transmit power level. Valid value range is 0-3.";
      }

      leaf band {
        type uint32 {
          range "1..4";
        }
        mandatory true;
        description
          "Band of AP to configure transmit power level
         1 - 2.4 GHz
         2 - 5 GHz
         3 - Dual band
         4 - 6 GHz";
      }

      choice alternative-choice {
        mandatory true;
        description
          "Alternative choice AP name and MAC address";
        leaf ap-name {
          type string;
          mandatory true;
          description
            "AP name for configuring transmit power level";
        }
        leaf mac-addr {
          type yang:mac-address;
          mandatory true;
          description
            "MAC address of AP for configuring transmit power level";
        }
      }  // choice alternative-choice
    }  // grouping set-ap-slot-tx-power-level

    grouping set-ap-slot-antenna-mode {
      description
        "Configures the antenna mode of the AP";
      leaf antenna-mode {
        type wireless-enum-types:enm-antenna-mode;
        mandatory true;
        description "Supported antenna mode";
      }

      leaf slot-id {
        type uint8 {
          range "0..2";
        }
        mandatory true;
        description
          "Slot ID of AP to configure the antenna mode. Valid value range is 0-2";
      }

      choice alternative-choice {
        mandatory true;
        description
          "AP name or AP MAC address";
        leaf ap-name {
          type string;
          mandatory true;
          description
            "Name of AP to configure the antenna mode";
        }
        leaf mac-addr {
          type yang:mac-address;
          mandatory true;
          description
            "MAC address of AP to configure the antenna mode";
        }
      }  // choice alternative-choice
    }  // grouping set-ap-slot-antenna-mode

    grouping set-ap-admin-state {
      description
        "Disable/Enable AP admin state";
      leaf mode {
        type wireless-enum-types:enm-admin-status;
        mandatory true;
        description
          "Mode for AP admin state";
      }

      choice alternative-choice {
        mandatory true;
        description
          "AP name or AP MAC address";
        leaf ap-name {
          type string;
          mandatory true;
          description
            "AP name for changing AP admin state";
        }
        leaf mac-addr {
          type yang:mac-address;
          mandatory true;
          description
            "MAC address of AP for changing AP admin state";
        }
      }  // choice alternative-choice
    }  // grouping set-ap-admin-state

    grouping set-ap-slot-admin-state {
      description
        "Configure admin state of AP slot";
      leaf mode {
        type wireless-enum-types:enm-admin-status;
        mandatory true;
        description
          "Mode of AP to configure admin state";
      }

      leaf slot-id {
        type uint8 {
          range "0..3";
        }
        mandatory true;
        description
          "Slot ID of AP to configure admin state. Valid value range is 0-3.";
      }

      leaf band {
        type uint32 {
          range "1..3";
        }
        mandatory true;
        description
          "Radio frequency band of AP to configure admin state.
          1 - 2.4 GHz
          2 - 5 GHz
          3 - Dual band";
      }

      choice alternative-choice {
        mandatory true;
        description
          "AP name or AP MAC address";
        leaf ap-name {
          type string;
          mandatory true;
          description
            "Name of AP to configure admin state";
        }
        leaf mac-addr {
          type yang:mac-address;
          mandatory true;
          description
            "MAC address of AP to configure admin state";
        }
      }  // choice alternative-choice
    }  // grouping set-ap-slot-admin-state

    grouping set-ap-slot-tx-power-customize {
      description
        "Enables auto RF on a slot";
      leaf mode {
        type wireless-types:w-config-type;
        mandatory true;
        description
          "Select mode as CONFIG AUTO to configure transmit power of AP";
      }

      leaf slot-id {
        type uint8 {
          range "0..3";
        }
        mandatory true;
        description
          "Slot ID of AP radio on which to configure transmit power. Valid value range is 0-3.";
      }

      leaf band {
        type uint32;
        mandatory true;
        description
          "Radio frequency band to configure transmit power on.
          1 - 2.4 GHz
          2 - 5 GHz
          3 - Dual band
          4 - 6 Ghz";
      }

      choice alternative-choice {
        mandatory true;
        description
          "AP name or AP MAC address";
        leaf ap-name {
          type string;
          mandatory true;
          description
            "Name of AP to configure transmit power of AP";
        }
        leaf mac-addr {
          type yang:mac-address;
          mandatory true;
          description
            "MAC address of AP to configure transmit power of AP";
        }
      }  // choice alternative-choice
    }  // grouping set-ap-slot-tx-power-customize

    rpc set-ap-vlan-tag {
      description
        "Configure VLAN tagging for non-bridge AP";
      input {
        uses wireless-access-point-cfg-rpc:set-ap-vlan-tag;
      }
    }  // rpc set-ap-vlan-tag

    rpc set-ap-monitor-mode-chnl-optimize {
      description
        "Configure channel scanning optimization for AP";
      input {
        uses wireless-access-point-cfg-rpc:set-ap-monitor-mode-chnl-optimize;
      }
    }  // rpc set-ap-monitor-mode-chnl-optimize

    rpc set-ap-mode {
      description "Configures AP mode";
      input {
        uses wireless-access-point-cfg-rpc:set-ap-mode;
      }
    }  // rpc set-ap-mode

    rpc set-lrad-led-state {
      description
        "Set LED-state for Cisco AP";
      input {
        uses wireless-access-point-cfg-rpc:set-lrad-led-state;
      }
    }  // rpc set-lrad-led-state

    rpc set-ap-location {
      description "Configure AP location";
      input {
        uses wireless-access-point-cfg-rpc:set-ap-location;
      }
    }  // rpc set-ap-location

    rpc set-ap-name {
      description "Configure AP name";
      input {
        uses wireless-access-point-cfg-rpc:set-ap-name;
      }
    }  // rpc set-ap-name

    rpc set-ap-antenna-band-mode {
      description
        "Configure antenna band mode";
      input {
        uses wireless-access-point-cfg-rpc:set-ap-antenna-band-mode;
      }
    }  // rpc set-ap-antenna-band-mode

    rpc set-ap-country {
      description
        "Configure the country of operation";
      input {
        uses wireless-access-point-cfg-rpc:set-ap-country;
      }
    }  // rpc set-ap-country

    rpc set-ap-slot-ext-antenna-gain {
      description
        "Configures the external antenna gain of AP";
      input {
        uses wireless-access-point-cfg-rpc:set-ap-slot-ext-antenna-gain;
      }
    }  // rpc set-ap-slot-ext-antenna-gain

    rpc set-ap-slot-phy-ht-chan {
      description
        "Configures static channel on a radio interface of access point";
      input {
        uses wireless-access-point-cfg-rpc:set-ap-slot-phy-ht-chan;
      }
    }  // rpc set-ap-slot-phy-ht-chan

    rpc set-ap-slot-phy-ht-customize {
      description
        "Enables auto channel selection for a radio band of AP";
      input {
        uses wireless-access-point-cfg-rpc:set-ap-slot-phy-ht-customize;
      }
    }  // rpc set-ap-slot-phy-ht-customize

    rpc set-ap-cleanair {
      description
        "Configures clean air functionality on radio band of access point";
      input {
        uses wireless-access-point-cfg-rpc:set-ap-cleanair;
      }
    }  // rpc set-ap-cleanair

    rpc dual-band-radio-band {
      description
        "Configures the 802.11 dual-band radio's current band i.e 2.4GHz/5GHz";
      input {
        uses wireless-access-point-cfg-rpc:dual-band-radio-band;
      }
    }  // rpc dual-band-radio-band

    rpc lan-port-config-enable {
      description
        "AP LAN port configuration";
      input {
        uses wireless-access-point-cfg-rpc:lan-port-config-enable;
      }
    }  // rpc lan-port-config-enable

    rpc set-ap-controller {
      description
        "Configures controller information in access point";
      input {
        uses wireless-access-point-cfg-rpc:set-ap-controller;
      }
    }  // rpc set-ap-controller

    rpc set-ap-led-brightness-level {
      description
        "Configure the led brightness level";
      input {
        uses wireless-access-point-cfg-rpc:set-ap-led-brightness-level;
      }
    }  // rpc set-ap-led-brightness-level

    rpc set-ap-slot-tx-power-level {
      description
        "Modify slot transmit power level";
      input {
        uses wireless-access-point-cfg-rpc:set-ap-slot-tx-power-level;
      }
    }  // rpc set-ap-slot-tx-power-level

    rpc set-ap-slot-antenna-mode {
      description
        "Configures the 802.11a antenna mode";
      input {
        uses wireless-access-point-cfg-rpc:set-ap-slot-antenna-mode;
      }
    }  // rpc set-ap-slot-antenna-mode

    rpc set-ap-admin-state {
      description
        "Enable/Disable AP admin state";
      input {
        uses wireless-access-point-cfg-rpc:set-ap-admin-state;
      }
    }  // rpc set-ap-admin-state

    rpc set-ap-slot-admin-state {
      description
        "Configure slot admin state";
      input {
        uses wireless-access-point-cfg-rpc:set-ap-slot-admin-state;
      }
    }  // rpc set-ap-slot-admin-state

    rpc set-ap-slot-tx-power-customize {
      description "Enable auto RF on a slot";
      input {
        uses wireless-access-point-cfg-rpc:set-ap-slot-tx-power-customize;
      }
    }  // rpc set-ap-slot-tx-power-customize
  }  // module Cisco-IOS-XE-wireless-access-point-cfg-rpc