Cisco-IOS-XE-interfaces-oper

This module contains a collection of YANG definitions for monitoring the interfaces in a Network Element. Copyright (c) 2016-202...

Typedef Base type Abstract
aggregation-type enumeration Type to define the lag-type, i.e., how the LAG is defined and managed
dot3-stats-versions enumeration The version of dot 3 error counters.
ether-duplex enumeration The duplex setting of the interface
ether-speed enumeration The speed setting of the interface
idle-character-type enumeration Synchronous serial idle character
ietf-intf-type enumeration IANAifType This data type is used as the syntax of the ifType object in the (updated) definition of MIB-II's ifTable
intf-state enumeration The desired state of the interface. This leaf has the same read semantics as ifAdminStatus. Reference: RFC 2863: The Interfaces Group MIB - ifAdminStatus
media-type-class enumeration Maximum possible values for media type
oper-state enumeration The current operational state of the interface. This leaf has the same semantics as ifOperStatus. Reference: RFC 2863: The Interfaces Group MIB - ifOperStatus
qos-direction enumeration QoS direction indication
qos-match-type enumeration QOS match type
sc-filter-state enumeration Storm control filter state
sc-suppress-type enumeration Storm control suppression type
serial-crc enumeration The Cyclic Redundancy Code type
signal-status enumeration Synchronous serial interface signal status
subrate-speed enumeration The subrate on a serial interface
t1e1-loopback-mode enumeration Loopback mode type
thresh-unit enumeration Units of threshold

© 2023 YumaWorks, Inc. All rights reserved.