An arbitrary integer-value to uniquely identify a
management domain on the local system.
VlanIndex
int32
The VLAN-id of a VLAN on ISL or 802.1q trunks.
Modification of default parameters is allowed.
Implementations are allowed to restrict
the range of VLANs.
For entities support up to 1024 VLANS.
VLANs above 1000 are reserved for default VLANs and
future use. Modification of default parameters is
allowed. Creation or deletion of VLANs above 1000 is not
allowed.
For a new object which needs the vlan-id of a VLAN as
its SYNTAX, it is suggested to import VlanIndex from
Q-BRIDGE-MIB instead of importing this TC here in
CISCO-VTP-MIB.
VlanType
enumeration
The type of a VLAN.
Note that the 'ethernet' type, is used for any ethernet or
802.3 VLAN, including an ATM Ethernet ELAN; and the
'tokenRing' ('trCrf') type is used for each VLAN
representing a single logical 802.5 ring including an ATM
Token-Ring ELAN.
The 'trCrf' type is used for token ring VLANs made up of
(at most) one transparently bridged LAN segment.
The 'trBrf' type is used for VLANs which represent the
scope of many 'trCrf' VLANs all connected together via
source route bridging. The token ring 'trBrf' can be said
to represent the bridged broadcast domain.
VlanTypeExt
bits
The additional type information of VLAN.
vtpmanageable(0) An user defined VLAN which is
manageable through VTP protocol.
The value of this bit cannot be
changed.
internal(1) An internal VLAN created by the device.
Internal VLANs cannot be created or
deleted. The value of this bit cannot
be changed.
reserved(2) A VLAN reserved by the device.
Reserved VLANs cannot be created or
deleted. The value of this bit cannot
be changed.
rspan(3) A VLAN created to exclusively carry
the traffic for a Remote Switched
Port Analyzer (RSPAN). This bit can
only be set or cleared during the
VLAN creation. Once the VLAN is
created, the value of this bit cannot
be modified.
dynamicGvrp(4) A VLAN dynamically created by GVRP
(GARP VLAN Registration Protocol)
propagation. The value of this bit
cannot be changed.