The endpoint discriminator class supplied by the remote peer in
a PPP Multilink bundle.
RFC 1990 defines the following classes:
none: Class 0 - Null Class. No endpoint discriminator
is being used. The endpoint discriminator should
contain a SnmpAdminString (SIZE (0)) value.
local: Class 1 - Locally Assigned Address. This class is
defined to permit a local assignment in the case
where use of one of the globally unique classes is
not possible. The endpoint discriminator should
contain a SnmpAdminString (SIZE(1..20)) value.
ipV4Address: Class 2 - Internet Protocol (IP) Address. An
address in this class contains an IP host address.
The endpoint discriminator should contain a
InetAddressIPv4 value.
macAddress: Class 3 - IEEE 802.1 Globally Assigned MAC
Address. An address in this class contains an
IEEE 802.1 MAC address in canonical (802.3)
format. The endpoint discriminator should contain
a MacAddress value.
magicNumber: Class 4 - PPP Magic-Number Block. This is not an
address but a block of 1 to 5 concatenated 32 bit
PPP Magic-Numbers. The endpoint discriminator
should contain an OCTET STRING (SIZE (4|8|12|16|
20)) value.
phone: Class 5 - Public Switched Network Directory
Number. An address in this class contains an
octet sequence as defined by I.331 (E.164)
representing an international telephone directory
number suitable for use to access the endpoint via
the public switched telephone network. The
endpoint discriminator should contain a
SnmpAdminString (SIZE(1..15)) value.
TunnelType
enumeration
The tunnel type. This is the tunnel protocol of a VPDN
tunnel.