| DomainId |
int32 |
The Domain Id of the switch. This is assigned
dynamically if the Domain Manager is enabled on
the switch or could be configured statically by
the user. |
| DomainIdOrZero |
int32 |
The Textual convention is an extension to
textual convetion 'DomainId'. It includes
the value '0'in addition the range 1-239.
Value '0' indicates that Domain Id has
been neither configured nor assigned. |
| FcAddress |
binary |
Represents either the Fibre Channel Address ID or
the World Wide Name associated with a Fibre
Channel (FC) Entity. |
| FcAddressId |
binary |
Represents Fibre Channel Address ID, a 24-bit
value unique within the address space of a Fabric. |
| FcAddressType |
enumeration |
Denotes if a Fibre Channel Address is
a World Wide Name (WWN) or a Fibre
Channel Address ID (FCID).
wwn(1) - address is WWN.
fcid(2) - address is FCID. |
| FcClassOfServices |
bits |
Represents the class of service capability of an
NxPort or FxPort. |
| FcIfServiceStateType |
enumeration |
Represents the service state of a Fibre Channel
interface. Following are the meanings of the
enumerated values:
inService (1) - interface is in service and is
allowed to become operational.
outOfService (2) - interface is removed from service
and is not allowed to become
operational. |
| FcIfSfpDiagLevelType |
enumeration |
Represents the severity level of the SFP
diagnostic information of an interface for
temperature, voltage, current, optical
transmit and receive power. |
| FcIfSpeed |
enumeration |
Represents the speed of a fibre channel port.
Following are the meanings of the enumerated values:
auto (1) - Negotiate to determine the speed
automatically.
oneG (2) - 1Gbit
twoG (3) - 2Gbit
fourG (4) - 4Gbit
autoMaxTwoG (5) - Negotiate to determine the
speed automatically upto a
maximum of 2Gbit.
eightG (6) - 8Gbit
autoMaxFourG (7) - Negotiate to determine the
speed automatically upto a
maximum of 4Gbit.
tenG (8) - 10GBit.
autoMaxEightG (9) - Negotiate to determine the
speed automatically upto a
maximum of 8Gbit.
sixteenG (10) - 16GBit.
autoMaxSixteenG (11) - Negotiate to determine the
speed automatically upto a
maximum of 16Gbit. |
| FcNameId |
binary |
Represents the World Wide Name (WWN) associated with
a Fibre Channel (FC) entity. A WWN is a 64 bit address
to uniquely identify each entity within a Fibre Channel
fabric. |
| FcNameIdOrZero |
binary |
The World Wide Name (WWN) associated with a Fibre Channel
(FC) entity. WWNs were initially defined as 64-bits in
length. The latest definition (for future use) is 128-bits
long. The zero-length string value is used in circumstances
where the WWN is unassigned/unknown. |
| FcPortModuleTypes |
enumeration |
Represents module type of the port connector. This
object refers to the hardware implementation of the port.
The enums are defined as per FC-GS-4 standard.
unknown (1) - unknown
other (2) - other
gbic (3) - gbic (gigabit interface card)
embedded (4) - gbic is part of the line card
and is unremovable
glm (5) - if its a gigabit link module
(GLM). A GLM has a different
form factor than GBIC. GLM is
not supported by our switch.
gbicWithSerialID (6) - If GBIC serial id can be read
gbicWithoutSerialID (7) - If GBIC serial id cannot be read
sfpWithSerialID (8) - If small form factor (SFP)
pluggable GBICs serial id can
be read
sfpWithoutSerialID (9) - If small form factor (SFP)
pluggable GBICs serial id
cannot be read
The following enums are module types for 10 gigabit small
form factor pluggable sfp port connectors.
xfp (10) - xfp
x2Short (11) - x2 short
x2Medium (12) - x2 medium
x2Tall (13) - x2 tall
xpakShort (14) - xpak short
xpakMedium (15) - xpak medium
xpakTall (16) - xpak tall
xenpak (17) - xenpak
sfpDwdm (18) - DWDM SFP type
qsfp (19) - Quad small form-factor (QSFP)
pluggable type
x2Dwdm (20) - x2 DWDM
. |
| FcPortTxTypes |
enumeration |
Represents port transciever technology types.
unknown (1) - unknown
longWaveLaser (2) - 1550nm laser
shortWaveLaser (3) - 850nm laser
longWaveLaserCostReduced (4) - 1310nm laser
electrical (5) - electrical
tenGigBaseSr (6) - 10GBASE-SR 850nm laser
tenGigBaseLr (7) - 10GBASE-LR 1310nm laser
tenGigBaseEr (8) - 10GBASE-ER 1550nm laser
tenGigBaseLx4 (9) - 10GBASE-LX4 WWDM 1300nm laser
tenGigBaseSw (10) - 850nm laser
tenGigBaseLw (11) - 1310nm laser
tenGigBaseEw (12) - 1550nm laser
. |
| FcPortTypes |
enumeration |
Represents fibre channel port types:
auto (1) - Mode is determined by port initialization
scheme.
fPort (2) - Fibre channel fabric port.
flPort (3) - Fibre channel arbitrated loop port.
ePort (4) - Fabric Expansion port.
bPort (5) - Bridging port.
fxPort (6) - This port can only be f_port or fl_port.
sdPort (7) - SPAN destination port. SD_ports transmit
traffic copied from one or more source ports
for monitoring purposes.
tlPort (8) - Translation loop port.
nPort (9) - Fibre channel N port.
nlPort (10) - Fibre channel NL port.
nxPort (11) - This port can only be n_port or nl_port.
-- read only port types.
tePort (12) - Trunking e_port.
Note: A port which is administratively set
to 'ePort', will operationally have type
'tePort' if fcIfOperTrunkMode has the value
'trunk'.
fvPort (13) - Virtual Port.
portOperDown (14) - port operationally down
If a port is operationally down, the
port mode is unknown. In such cases
the operational port mode is shown
as 'portOperDown'.
stPort (15) - SPAN Tunnel destination port.
npPort (16) - N Proxy port mode applicable only to N-port
Virtualizer (NPV)
tfPort (17) - Trunking fibre channel fabric port.
tnpPort (18) - Trunking N Proxy port mode applicable only
to N-port Virtualizer (NPV). |
| InterfaceOperMode |
enumeration |
Represents the operational mode of an interface
auto (1) - Mode is determined by port initialization
scheme.
fPort (2) - Fibre channel fabric port.
flPort (3) - Fibre channel arbitrated loop port.
ePort (4) - Fabric Expansion port.
bPort (5) - Bridging port.
fxPort (6) - This port can only be f_port or fl_port.
sdPort (7) - SPAN destination port. SD_ports transmit
traffic copied from one or more source
ports for monitoring purposes.
tlPort (8) - Translation loop port.
nPort (9) - Fibre channel N port.
nlPort (10) - Fibre channel NL port.
nxPort (11) - This port can only be n_port or nl_port.
-- read only port types.
tePort (12) - Trunking e_port.
Note: A port which is administratively set
to 'ePort', will operationally have type
'tePort' if fcIfOperTrunkMode has the value
'trunk'.
fvPort (13) - Virtual Port.
portOperDown (14) - port operationally down
If a port is operationally down, the
port mode is unknown. In such cases
the operational port mode is shown
as 'portOperDown'.
stPort (15) - SPAN Tunnel destination port.
mgmtPort(16) - Mgmt Port.
ipsPort(17) - Ethernet Port.
evPort(18) - FCIP tunnels on Ethernet ports.
npPort (19) - N Proxy port mode applicable only
to N-port Virtualizer (NPV).
tfPort (20) - Trunking fibre channel fabric port.
tnpPort (21) - Trunking N Proxy port mode applicable only
to N-port Virtualizer (NPV). |
| PortMemberList |
binary |
A list of ifIndex's of the ports that are members of
this list.
The value of this object is a concatenation of zero or
more 4-octet strings, where each 4-octet string contains
a 32-bit ifIndex value in network byte order.
A zero length string value means this list has no
members. |
| VsanIndex |
int32 |
The VSAN id of a VSAN which uniquely identifies
a VSAN within a fabric. VSAN id is 12-bit
wide; so theoretically, 4096 VSANs can be defined in
a fabric and this device can be part of. However, VSAN
numbers 0 , 4094 and 4095 are reserved. |