The power class of the PD or PSE port that implements
the LLDP based Data Link Layer power classification
'unknown' - power classification of the powered devices is
unknown.
'class0' - power classification of the powered devices is
class 0 in IEEE specifications.
'class1' - power classification of the powered devices is
class 1 in IEEE specifications.
'class2' - power classification of the powered devices is
class 2 in IEEE specifications.
'class3' - power classification of the powered devices is
class 3 in IEEE specifications.
'class4' - power classification of the powered devices is
class 4 in IEEE specifications.
CpeExtLldpPwrSrc
enumeration
The power source of the PD or PSE port which implements the
LLDP based Data Link Layer power classification.
'pseAndLocal' - A PD powered both locally and by a PSE.
'local' - A PD powered locally only.
'pse' - A PD powered by a PSE only.
'backupSrc' - A PSE powered by a backup power source.
'primarySrc' - A PSE powered by its primary power source.
'unknown' - A PD or PSE where the power source is
unknown.
CpeExtLldpPwrType
enumeration
The requested Data Terminal Equipment (DTE) Power via
Media Dependent Interface (MDI) type based on Data Link Layer
(DLL) power classification.
In Data Link Layer power classification, the PSE and PD perform
power negotiation using the Link Layer Discovery Protocol (LLDP)
as soon as the data link is established. It has finer power
resolution than the Physical Layer power classification and has
the ability for the PSE and PD to participate in dynamic power
allocation wherein allocated power to the PD may change one or
more times during PD operation.
'type1Pd' - A PD that advertises a power draw less than or
equal to 12.95 W (at the PD).
'type1Pse' - A PSE that is designed to support a Type 1 PD.
'type2Pd' - A PD that advertises a power draw greater than
12.95 W (at the PD).
'type2Pse - A PSE that is designed to support either a Type 1
or a Type 2 PD.
CpeExtPwrPriority
enumeration
The power priority for the PD on the PSE port which implements
the LLDP based Data Link Layer power classification.
'critical' - power priority is at critical level.
'high' - power priority is at high level.
'low' - power priority is at low level.
'unknown' - power priority level is unknown.