module CISCO-IPSLA-TC-MIB {

    yang-version 1;

    namespace
      "urn:ietf:params:xml:ns:yang:smiv2:CISCO-IPSLA-TC-MIB";

    prefix CISCO-IPSLA-TC-MIB;

    import ietf-yang-smiv2 {
      prefix smiv2;
    }

    organization "Cisco Systems, Inc.";

    contact
      "Cisco Systems, Inc.
Customer Service

Postal: 170 W Tasman Drive
San Jose, CA 95134

Tel: +1 800 553 NETS
Email: cs-ipsla@cisco.com";

    description
      "This MIB contains textual conventions used by
CISCO IPSLA MIBs.

Acronyms:
 FEC: Forward Equivalence Class
 LPD: Label Path Discovery
 LSP: Label Switched Path
 MPLS: Multi Protocol Label Switching
 RTT: Round Trip Time
 SAA: Service Assurance Agent
 SLA: Service Level Agreement
 VPN: Virtual Private Network
 ICPIF: Calculated Planning Impairment Factor";

    revision "2007-03-23" {
      description
        "Initial version of this MIB module.";
    }

    smiv2:alias "ciscoIpSlaTCMIB" {
      smiv2:oid "1.3.6.1.4.1.9.9.624";
    }

    typedef IpSlaOperType {
      type enumeration {
        enum "icmpEcho" {
          value 1;
        }
        enum "udpEcho" {
          value 2;
        }
        enum "tcpConnect" {
          value 3;
        }
        enum "udpJitter" {
          value 4;
        }
        enum "icmpJitter" {
          value 5;
        }
      }
      description
        "Specifies the type of IP SLA operation to be performed.

icmpEcho(1)   -  The value 'icmpEcho' will cause the
		 IP SLA application to  perform a timed
		 ICMP echo request/response operation.


udpEcho(2)    -  The value 'udpEcho' will cause the IP SLA
		 application to perform a timed udp packet
		 send/receive operation.

tcpConnect(3) -  The value 'tcpConnect' will cause the IP
		 SLA application to perform a timed TCP
		 connect operation.

udpJitter(4)  -  The value 'udpjitter' will cause the IP
		 SLA application to perform delay variance
		 analysis using UDP timestamp packets.

icmpjitter(5) -  The value 'icmpjitter' will cause the IP
		 SLA application to perform delay variance
		 analysis using ICMP timestamp packets.";
    }

    typedef IpSlaCodecType {
      type enumeration {
        enum "notApplicable" {
          value 0;
        }
        enum "g711ulaw" {
          value 1;
        }
        enum "g711alaw" {
          value 2;
        }
        enum "g729a" {
          value 3;
        }
      }
      description
        "Specifies the IP SLA codec type to be used with the UDP
jitter operation. The following codec types are defined:

notApplicable(0)     - no CodecType is defined

g711ulaw(1)          - uses G.711 U Law 64000 bps

g711alaw(2)          - uses G.711 A Law 64000 bps

g729a(3)             - uses G.729 8000 bps";
    }

    typedef IpSlaReactVar {
      type enumeration {
        enum "rtt" {
          value 1;
        }
        enum "jitterSDAvg" {
          value 2;
        }
        enum "jitterDSAvg" {
          value 3;
        }
        enum "packetLossSD" {
          value 4;
        }
        enum "packetLossDS" {
          value 5;
        }
        enum "mos" {
          value 6;
        }
        enum "timeout" {
          value 7;
        }
        enum "connectionLoss" {
          value 8;
        }
        enum "verifyError" {
          value 9;
        }
        enum "jitterAvg" {
          value 10;
        }
        enum "icpif" {
          value 11;
        }
        enum "packetMIA" {
          value 12;
        }
        enum "packetLateArrival" {
          value 13;
        }
        enum "packetOutOfSequence" {
          value 14;
        }
        enum "maxOfPositiveSD" {
          value 15;
        }
        enum "maxOfNegativeSD" {
          value 16;
        }
        enum "maxOfPositiveDS" {
          value 17;
        }
        enum "maxOfNegativeDS" {
          value 18;
        }
        enum "successivePacketLoss" {
          value 19;
        }
        enum "maxOfLatencyDS" {
          value 20;
        }
        enum "maxOfLatencySD" {
          value 21;
        }
        enum "latencyDSAvg" {
          value 22;
        }
        enum "latencySDAvg" {
          value 23;
        }
        enum "packetLoss" {
          value 24;
        }
      }
      description
        "The following are specific reaction variables for an
IP SLA operation to react upon:

 rtt(1)            - Round Trip Time

 jitterSDAvg(2)    - Jitter average from source to
		     destination

 jitterDSAvg(3)    - Jitter average from destination
		     to source

 packetLossSD(4)   - Packet loss from source to
		     destination

 packetLossDS(5)   - Packet loss from destination
		     to source

 mos(6)            - Mean Opinion Score

 timeout(7)        - Timeout of the operation

 connectionLoss(8) - Connection failed to the destination

 verifyError(9)    - Data corruption occurs

 jitterAvg(10)     - Jitter average in both directions

 icpif(11)         - Calculated Planning Impairment Factor

 packetMIA(12)     - Missed packets in operation

 packetLateArrival(13)   - Packets arriving late

 packetOutOfSequence(14) - Packets arriving out of sequence

 maxOfPositiveSD(15)     - Maximum positive jitter from
			   source to destination

 maxOfNegativeSD(16)     - Maximum negative jitter from
			   source to destination

 maxOfPositiveDS(17)     - Maximum positive jitter from
			   destination to source

 maxOfNegativeDS(18)     - Maximum negative jitter from
			   destination to source.

 successivePacketLoss(19)- Successive packet dropped

 maxOfLatencyDS(20)      - Maximum Latency from
			   Destination to Source

 maxOfLatencySD(21)      - Maximum Latency from Source
			   to Destination

 latencyDSAvg(22)        - Latency average from Destination
			   to Source

 latencySDAvg(23)        - Latency average from Source
			   to Destination

 packetLoss(24)          - Packets loss in both directions";
    }
  }  // module CISCO-IPSLA-TC-MIB