CISCO-IETF-ISIS-MIB

This document describes a management information base for the IS-IS Routing protocol, as described in ISO 10589, when it is used...

Typedef Base type Abstract
CiiAdminState enumeration Type used in enabling and disabling a row. Values match those in RFC 2863.
CiiCircuitID binary ID for a circuit.
CiiDefaultMetric int32 Integer sub-range for default metric for single hop. ISO 10589 provides for 4 types of metric. Only the 'default' metric is used in practice.
CiiFullMetric uint32 Full Metric for IP Routes. Traffic Engineering extensions provide 32 bit metrics.
CiiISLevel enumeration Identifies a level.
CiiISPriority int32 Integer sub-range for IS-IS priority.
CiiLevelState enumeration States of the IS-IS protocol.
CiiLinkStatePDUID binary A Link State PDU Identifier.
CiiLSPBuffSize int32 Integer sub range for LSP size.
CiiMetricStyle enumeration Do we use 1195 style Metrics or wide metrics.
CiiMetricType enumeration Is this an Internal or External Metric?
CiiOSINSAddress binary OSI Network Service Address, e.g. NSAP, SNPA, or Network Entity Title
CiiPDUHeader binary A block to contain the header from a PDU.
CiiSupportedProtocol enumeration Types of network protocol supported by Integrated IS-IS. The values for ISO8473 and IP are those registered for these protocols in ISO TR9577.
CiiSystemID binary A system ID.
CiiUnsigned16TC uint32 An Unsigned32 further restricted to 16 Bits. Note that the ASN.1 BER encoding may still require 24 Bits for some values.
CiiUnsigned8TC uint32 An Unsigned32 further restricted to 8 Bits. Note that the ASN.1 BER encoding may still require 16 Bits for some values.
CiiWideMetric uint32 Wide Metric for IS Neighbors. ISO 10589 provides a 6 bit metric. Traffic Engineering extensions provide 24 bit metrics.

© 2023 YumaWorks, Inc. All rights reserved.