bbf-l2-dhcpv4-relay

This module contains a collection of YANG definitions for supporting the Broadband Forum requirements on subscriber management v...

  • Version: 2017-05-08

    bbf-l2-dhcpv4-relay@2017-05-08


    
      module bbf-l2-dhcpv4-relay {
    
        yang-version 1.1;
    
        namespace
          "urn:bbf:yang:bbf-l2-dhcpv4-relay";
    
        prefix bbf-l2-d4r;
    
        import ietf-interfaces {
          prefix if;
        }
        import ietf-yang-types {
          prefix yang;
        }
        import bbf-yang-types {
          prefix bbf-yang;
        }
        import bbf-if-type {
          prefix bbfift;
        }
        import bbf-subscriber-types {
          prefix bbf-subtype;
        }
    
        organization
          "Broadband Forum <https://www.broadband-forum.org>
         Common YANG Project Stream";
    
        contact
          "Comments or questions about this Broadband Forum YANG module
         should be directed to <mailto:help@broadband-forum.org>.
    
         Editor:      Joey Boyd, ADTRAN
                      <mailto:joey.boyd@adtran.com>
    
         Editor:      Ludwig Pauwels, Nokia
                      <mailto:ludwig.pauwels@nokia.com>
    
         PS Leader:   Michael Shaffer, Nokia
                      <mailto:michael.shaffer@nokia.com>
    
         PS Leader:   William Lupton, Broadband Forum
                      <mailto:wlupton@broadband-forum.org>";
    
        description
          "This module contains a collection of YANG definitions for 
         supporting the Broadband Forum requirements on subscriber 
         management via the DHCPv4 protocol as applicable to access 
         network equipment. As such, this module is specific to access 
         network equipment (e.g., BBF-specified Access Nodes and FTTdp 
         DPUs).
    
         Copyright (c) 2017, Broadband Forum
    
         Redistribution and use in source and binary forms, with or
         without modification, are permitted provided that the following
         conditions are met:
    
         1. Redistributions of source code must retain the above copyright
            notice, this list of conditions and the following disclaimer.
    
         2. Redistributions in binary form must reproduce the above
            copyright notice, this list of conditions and the following
            disclaimer in the documentation and/or other materials
            provided with the distribution.
    
         3. Neither the name of the copyright holder nor the names of its
            contributors may be used to endorse or promote products
            derived from this software without specific prior written
            permission.
    
         THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
         CONTRIBUTORS \"AS IS\" AND ANY EXPRESS OR IMPLIED WARRANTIES,
         INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
         MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
         DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
         CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
         SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
         NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
         LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
         CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
         STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
         ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
         ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
    
         The above license is used as a license under copyright only.
         Please reference the Forum IPR Policy for patent licensing terms
         <https://www.broadband-forum.org/ipr-policy>.
    
         Any moral rights which are necessary to exercise under the above
         license grant are also deemed granted under this license.
    
         This version of this YANG module is part of TR-383; see
         the TR itself for full legal notices.";
    
        revision "2017-05-08" {
          description
            "Initial revision.
           * Approval Date:    see revision date above.
           * Publication Date: 2017-06-02.";
          reference
            "TR-383: Common YANG Modules
            	<https://www.broadband-forum.org/technical/download/
            		 TR-383.pdf>";
    
        }
    
    
        augment /if:interfaces/if:interface {
          when
            "derived-from-or-self(if:type,
                                'bbfift:vlan-sub-interface')" {
            description
              "Applies only to VLAN sub-interfaces.";
          }
          description
            "Additions for L2 DHCPv4 Relay Agent on the VLAN
           sub-interface.";
          container l2-dhcpv4-relay {
            presence
              "Presence of this container indicates L2 DHCPv4 Relay Agent 
             functionality is supported on this interface.";
            description
              "L2 DHCPv4 Relay Agent configuration parameters.";
            leaf enable {
              type boolean;
              default "false";
              description
                "Manage the L2 DHCP Relay Agent option 82 functionality.";
            }
    
            leaf trusted-port {
              type boolean;
              default "false";
              description
                "On a trusted port the option 82 from the user is accepted
               in upstream packets, and it is not removed from downstream 
               packets.";
            }
    
            leaf profile-ref {
              when "../enable = 'true'" {
                description
                  "Applicable only when L2 DHCPv4 Relay Agent functionality 
                 is enabled.";
              }
              type leafref {
                path "/bbf-l2-d4r:l2-dhcpv4-relay-profiles/bbf-l2-d4r:l2-dhcpv4-relay-profile/bbf-l2-d4r:name";
              }
              mandatory true;
              description
                "Reference to the DHCPv4 configuration profile.";
            }
          }  // container l2-dhcpv4-relay
        }
    
        container l2-dhcpv4-relay-profiles {
          description
            "L2 DHCPv4 Relay Agent configuration profiles.";
          list l2-dhcpv4-relay-profile {
            key "name";
            description
              "List containing the parameters for L2 DHCPv4 Relay Agent 
             configuration.";
            leaf name {
              type bbf-yang:string-ascii64;
              description "Name of the profile.";
            }
    
            leaf max-packet-size {
              type uint16;
              units "bytes";
              default "1500";
              description
                "The maximum size of the DHCP packet to be created after 
               appending the Agent Information option. Packets which, 
               after appending the Relay Agent Information option, would
               exceed this configured maximum size shall be forwarded 
               WITHOUT adding the Agent Information option.
    
               The 'max-packet-size' expresses the maximum size of the IP 
               packet, i.e. the payload of the Ethernet packet, i.e. it 
               excludes the Ethernet header and possible VLAN tags, it 
               includes the IP header, the UDP header, and the DHCP packet
               itself.";
              reference
                "RFC 3046 - Section 2.1";
    
            }
    
            container option82-format {
              description
                "Contains information that needs to be filled 
               in option 82";
              leaf-list suboptions {
                type enumeration {
                  enum "circuit-id" {
                    value 0;
                    description
                      "Add the sub-option circuit ID in option 82, i.e. add 
                     the sub-option with code 0x01.
    
                     The value inserted is the value of the leaf 
                     circuit-id defined in the instance in the list 
                     subscriber-profiles/subscriber-profile that is 
                     associated with the interface, if any. If this leaf 
                     is unknown, then a sub-option 
                     circuit ID will be generated according to the syntax 
                     defined in the leaf default-circuit-id-syntax.";
                    reference
                      "RFC 3046 - Section 3.1";
    
                  }
                  enum "remote-id" {
                    value 1;
                    description
                      "Add the sub-option remote ID in option 82, i.e. add 
                     the sub-option with code 0x02.
    
                     The value inserted is the value of the leaf 
                     remote-id defined in the instance in the list 
                     subscriber-profiles/subscriber-profile that is 
                     associated with the interface, if any. If this leaf 
                     is unknown, then a sub-option 
                     remote ID will be generated according to the syntax 
                     defined in the leaf default-remote-id-syntax.";
                    reference
                      "RFC 3046 - Section 3.2";
    
                  }
                  enum
                    "access-loop-characteristics" {
                    value 2;
                    description
                      "Signal the access loop characteristics in option 82.
                     Access-loop-characteristics are added using the 
                     vendor-specific sub-option with code 0x09.
    
                     The content of the sub-option is controlled via the 
                     leaf access-loop-suboptions.";
                    reference
                      "RFC 4243 - Sections 3 & 4";
    
                  }
                }
                min-elements 1;
                description
                  "Identifies the sub-options that should be part of 
                 option 82.";
              }
    
              leaf default-circuit-id-syntax {
                type bbf-yang:string-ascii63-or-empty;
                default "";
                description
                  "To be used to generate a sub-option circuit ID when no
                 circuit-id is provided for the VLAN sub-interface via a 
                 referenced subscriber-profiles/subscriber-profile.
    
                 The syntax is a string of ASCII characters that 
                 determines the actual value inserted in the sub-option.
                 Parts of the syntax that are recognized as predefined
                 keywords will be replaced by an actual value.";
                reference
                  "TR-178 - R117";
    
              }
    
              leaf default-remote-id-syntax {
                type bbf-yang:string-ascii63-or-empty;
                default "";
                description
                  "To be used to generate a sub-option remote ID when no 
                 remote-id is provided for the VLAN sub-interface via a 
                 referenced subscriber-profiles/subscriber-profile.
    
                 The syntax is a string of ASCII characters that 
                 determines the actual value inserted in the sub-option. 
                 Parts of the syntax that are recognized as predefined 
                 keywords will be replaced by an actual value.";
                reference
                  "TR-178 - R120";
    
              }
    
              leaf access-loop-suboptions {
                type bbf-subtype:broadband-line-characteristics;
                default "";
                description
                  "Broadband line characteristics that are to be added in
                 option 82.";
                reference
                  "TR-178 - R121";
    
              }
    
              leaf start-numbering-from-zero {
                type boolean;
                default "false";
                description
                  "In case the default-circuit-id-syntax or 
                 default-remote-id-syntax indicates a Slot or a Port 
                 identification shall be added to the sub-option value, 
                 then this leaf determines if the slot/port numbering 
                 MUST start from 0 or 1.";
                reference
                  "TR-178 - R118";
    
              }
    
              leaf use-leading-zeroes {
                type boolean;
                default "false";
                description
                  "In case the default-circuit-id-syntax or 
                 default-remote-id-syntax indicates a Slot or a Port 
                 identification shall be added to the sub-option value, 
                 then this leaf determines if the slot/port numbering 
                 MUST use leading 0's or not, i.e. generate a fixed 
                 length string or a string with only meaningful digits.";
                reference
                  "TR-178 - R119";
    
              }
            }  // container option82-format
          }  // list l2-dhcpv4-relay-profile
        }  // container l2-dhcpv4-relay-profiles
    
        augment /if:interfaces-state/if:interface/if:statistics {
          when
            "derived-from-or-self(../if:type,
                                'bbfift:vlan-sub-interface')" {
            description
              "Applies only to VLAN sub-interfaces and only when the L2 
             DHCPv4 Relay Agent functionality is enabled.";
          }
          description
            "L2 DHCPv4 Relay Agent statistics.";
          container dhcpv4 {
            presence
              "Statistics are provided when the L2 DHCPv4 Relay Agent 
             functionality is enabled";
            description
              "Container presents the packet statistics related to the L2
             DHCPv4 Relay Agent.";
            leaf in-bad-packets-from-client {
              type yang:counter32;
              description
                "Bad DHCPv4 packets received on the interface. The packets 
               are received from a DHCPv4 Client connected to it (directly
               or indirectly through a network).
    
               Discontinuities in the counter can occur at 
               re-initialization of the management system, and/or when the
               L2 DHCPv4 Relay functionality is disabled/enabled.";
            }
    
            leaf in-bad-packets-from-server {
              type yang:counter32;
              description
                "Bad DHCPv4 packets received on the interface. The packets 
               are received from a DHCPv4 Server connected to it (directly
               or indirectly through a network).
    
               Discontinuities in the counter can occur at 
               re-initialization of the management system, and/or when the
               L2 DHCPv4 Relay functionality is disabled/enabled.";
            }
    
            leaf in-packets-from-client {
              type yang:counter32;
              description
                "Valid DHCPv4 packets received on the interface. The packets
               are received from a DHCPv4 Client connected to it (directly
               or indirectly through a network).
    
               Discontinuities in the counter can occur at 
               re-initialization of the management system, and/or when the
               L2 DHCPv4 Relay functionality is disabled/enabled.";
            }
    
            leaf in-packets-from-server {
              type yang:counter32;
              description
                "Valid DHCPv4 packets received on the interface. The packets
               are received from a DHCPv4 Server connected to it (directly
               or indirectly through a network).
    
               Discontinuities in the counter can occur at 
               re-initialization of the management system, and/or when the
               L2 DHCPv4 Relay functionality is disabled/enabled.";
            }
    
            leaf out-packets-to-server {
              type yang:counter32;
              description
                "Valid DHCPv4 packets sent to the interface. The packets are
               sent to a DHCPv4 Server connected to it (directly or 
               indirectly through a network).
    
               Discontinuities in the counter can occur at 
               re-initialization of the management system, and/or when the
               L2 DHCPv4 Relay functionality is disabled/enabled.";
            }
    
            leaf out-packets-to-client {
              type yang:counter32;
              description
                "Valid DHCPv4 packets sent to the interface. The packets are
               sent to a DHCPv4 Client connected to it (directly or 
               indirectly through a network).
    
               Discontinuities in the counter can occur at 
               re-initialization of the management system, and/or when the
               L2 DHCPv4 Relay functionality is disabled/enabled.";
            }
    
            leaf option-82-inserted-packets-to-server {
              type yang:counter32;
              description
                "DHCPv4 packets from a Client to a Server that pass this 
               interface and into which the L2 DHCPv4 Relay inserted 
               option 82.
    
               Discontinuities in the counter can occur at 
               re-initialization of the management system, and/or when the
               L2 DHCPv4 Relay functionality is disabled/enabled.";
            }
    
            leaf option-82-removed-packets-to-client {
              type yang:counter32;
              description
                "DHCPv4 packets from a Server to a Client that pass this 
               interface and from which the L2 DHCPv4 Relay removed 
               option 82.
    
               Discontinuities in the counter can occur at 
               re-initialization of the management system, and/or when the
               L2 DHCPv4 Relay functionality is disabled/enabled.";
            }
    
            leaf option-82-not-inserted-to-server {
              type yang:counter32;
              description
                "DHCPv4 packets from a Client to a Server that pass this 
               interface and for which the L2 DHCPv4 Relay did not insert 
               option 82 because after insertion the length would exceed 
               the maximum allowed packet size.
    
               Discontinuities in the counter can occur at 
               re-initialization of the management system, and/or when the
               L2 DHCPv4 Relay functionality is disabled/enabled.";
            }
          }  // container dhcpv4
        }
      }  // module bbf-l2-dhcpv4-relay
    

© 2023 YumaWorks, Inc. All rights reserved.